summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-10-06ruby: rename ALPHA_Network_test protocol to Garnet_standalone.Tushar Krishna
Over the past 6 years, we realized that the protocol is essentially used to run the garnet network in a standalone manner, and feed standard synthetic traffic patterns through it.
2016-10-04kvm: Adding details to kvm page fault in x86Alexandru Dutu
Adding details, e.g. rip, rsp etc. to the kvm pagefault exit when in SE mode.
2016-10-04misc: Adds a warning in case gdb is attached multiple timesAlexandru Dutu
Instead of scheduling another event, this patch adds a warning in case gdb is attached multiple times and the first attachement event has not been processed yet.
2016-10-04gpu-compute: Added method to compute the actual workgroup sizeAlexandru Dutu
This patch adds a method to the Wavefront class to compute the actual workgroup size. This can be different from the maximum workgroup size specified when launching the kernel through the NDRange object. Current solution is still not optimal, as we are computing these for each wavefront and the dispatcher also needs to have this information and can't actually call Wavefront::computeActuallWgSz before the wavefronts are being created. A long term solution would be to have a Workgroup class that deals with all these details.
2016-10-04sim: Add a checkpoint function to test for entriesAndreas Sandberg
When loading a checkpoint, it's sometimes desirable to be able to test whether an entry within a secion exists. This is currently done automatically in the UNSERIALIZE_OPT_SCALAR macro, but it isn't possible to do for arrays, containers, or enums. Instead of adding even more macros, add a helper function (CheckpointIn::entryExists()) that tests for the presence of an entry. Change-Id: I4b4646b03276b889fd3916efefff3bd552317dbc Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-09-29ruby: correct size for partial memory writesBrad Beckmann
Fixed AbstractController::queueMemoryWritePartial to specify the correct size for partial memory writes.
2016-09-29mem: minor dprintf fix to abstract memBrad Beckmann
print number of bytes written as a decimal number, not hex
2016-09-22arm: disable GIC extensionsCurtis Dunham
Change-Id: If19b9c593b48ded1ea848f2d3710d4369ec8a221 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-09-22cpu: Fix the O3 CPU DrainRekai Gonzalez-Alberquilla
The drain did not wait until stages were ready again. Therefore, as a result of messages in the TimeBuffer being drain, the state after the drain was not consistent and asserts fired in some places when the draining happened after a stage got blocked, but before the notification arrived to the previous stages. Change-Id: Ib50b3b40b7f745b62c1eba2931dec76860824c71 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-09-16gpu-compute: fix typo in GPUDispatcherTony Gutierrez
2016-09-16hsail: Fix disassembly of load instruction with 3 destination operandsAlexandru Dutu
2016-09-16gpu-compute: Adding context serialization methods to WavefrontAlexandru Dutu
This patch adds methods to serialize the context of a particular wavefront to the simulated system memory. Context serialization is used when a wavefront is preempeted (i.e. context switch).
2016-09-16gpu-compute: Refactoring Wavefront::dynWaveIdAlexandru Dutu
2016-09-16gpu-compute: Adding vector register file debug messagesAlexandru Dutu
This patch introduces DPRINTFs for reading and writing to and from the vector register file.
2016-09-16gpu-compute: Changing reconvergenceStack typeAlexandru Dutu
std::stack has no iterators, therefore the reconvergence stack can't be iterated without poping elements off. We will be using std::list instead to be able to iterate for saving and restoring purposes.
2016-09-16gpu-compute: Adding ioctl for HW context sizeAlexandru Dutu
Adding runtime support for determining the memory required by a SIMD engine when executing a particular wavefront.
2016-09-16gpu-compute: Wavefront refactoringAlexandru Dutu
Renaming members of the Wavefront class in accordance with the style guide.
2016-09-16gpu-compute: Remove WFContextAlexandru Dutu
WFContext struct is currently unused and it has been rendered not useful in saving and restoring the context of a Wavefront. Wavefront class should be sufficient for that purpose and the runtime can figure out the memory size it will need to allocate for a Wavefront through an IOCTL.
2016-09-15base: eliminate ipython warningCurtis Dunham
Change-Id: I3e282baeb969b6bb9534813a2f433d68246c0669 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-09-15arm: Add m5_fail support for aarch64Ricardo Alves
Change-Id: Id2acbc09772be310a0eb9e33295afab07e08a4fa Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-09-15cpu: Support exit when any one Trace CPU completes replayRadhika Jagtap
This change adds a Trace CPU param to exit simulation early, i.e. when the first (any one) trace execution is complete. With this change the user gets a choice to configure exit as either when the last CPU finishes (default) or first CPU finishes replay. Configuring an early exit enables simulating and measuring stats strictly when memory-system resources are being stressed by all Trace CPUs. Change-Id: I3998045fdcc5cd343e1ca92d18dd7f7ecdba8f1d Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-09-15cpu: Adjust for trace offset and fix statsRadhika Jagtap
This change subtracts the time offset present in the trace from all the event times when nodes and request are sent so that the replay starts immediately when the simulation starts. This makes the stats accurate when the time offset in traces is large, for example when traces are generated in the middle of a workload execution. It also solves the problem of unnecessary DRAM refresh events that would keep occuring during the large time offset before even a single request is replayed into the system. Change-Id: Ie0898842615def867ffd5c219948386d952af7f7 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-09-15cpu: Add frequency scaling to the Trace CPURadhika Jagtap
This change adds a simple feature to scale the frequency of the Trace CPU. The compute delays in the input traces provide timing. This change adds a freqency multiplier parameter to the Trace CPU set to 1.0 by default. The compute delay is manipulated to effectively achieve the frequency at which the nodes become ready and thus scale the frequency of the Trace CPU. Change-Id: Iaabbd57806941ad56094fcddbeb38fcee1172431 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
2016-09-13kvm: Support timing accesses for KVM cpuMichael LeBeane
This patch enables timing accesses for KVM cpu. A new state, RunningMMIOPending, is added to indicate that there are outstanding timing requests generated by KVM in the system. KVM's tick() is disabled and the simulation does not enter into KVM until all outstanding timing requests have completed. The main motivation for this is to allow KVM CPU to perform MMIO in Ruby, since Ruby does not support atomic accesses.
2016-09-13x86: Force strict ordering for memory mapped m5opsMichael LeBeane
Normal MMAPPED_IPR requests are allowed to execute speculatively under the assumption that they have no side effects. The special case of m5ops that are treated like MMAPPED_IPR should not be allowed to execute speculatively, since they can have side-effects. Adding the STRICT_ORDER flag to these requests blocks execution until the associated instruction hits the ROB head.
2016-09-13sim: Refactor quiesce and remove FS assertsMichael LeBeane
The quiesce family of magic ops can be simplified by the inclusion of quiesceTick() and quiesce() functions on ThreadContext. This patch also gets rid of the FS guards, since suspending a CPU is also a valid operation for SE mode.
2016-09-13dev: Add a DmaCallback class to DmaDeviceMichael LeBeane
This patch introduces the DmaCallback helper class, which registers a callback to fire after a sequence of (potentially non-contiguous) DMA transfers on a DmaPort completes.
2016-09-13sim, syscall_emul: Add mmap to EmulatedDriverMichael LeBeane
Add support for calling mmap on an EmulatedDriver file descriptor.
2016-09-13gpu-compute: Fix bug with return in cfgMichael LeBeane
Connecting basic blocks would stop too early in kernels where ret was not the last instruction. This patch allows basic blocks after the ret instruction to be properly connected.
2016-09-13dev: Exit correctly in dist-gem5Michael LeBeane
The receiver thread in dist_iface is allowed to directly exit the simulation. This can cause exit to be called twice if the main thread simultaneously wants to exit the simulation. Therefore, have the receiver thread enqueue a request to exit on the primary event queue for the main simulation thread to handle.
2016-09-13misc: Remove FullSystem check for networking componentsMichael LeBeane
Ethernet devices are currently only hooked up if running in FS mode. Much of the Ethernet networking code is generic and can be used to build non-Ethernet device models. Some of these device models do not require a complex driver stack and can be built to use an EmulatedDriver in SE mode. This patch enables etherent interfaces to properly connect regardless of whether the simulation is in FS or SE mode.
2016-09-13base: Output all AddrRange parameters to config.iniMatt Poremba
Currently only 'start' and 'end' of AddrRange are printed in config.ini. This causes address ranges to be overlapping when loading a c++-only config with interleaved addresses using CxxConfigManger. This patch adds prints for the interleave and XOR bits to config.ini such that address ranges are properly setup with cxx config.
2016-09-06dev, arm: Add a customizable NoMali GPU modelAndreas Sandberg
Add a customizable NoMali GPU model and an example Mali T760 configuration. Unlike the normal NoMali model (NoMaliGpu), the NoMaliCustopmGpu model exposes all the important GPU ID registers to Python. This makes it possible to implement custom GPU configurations by without changing the underlying NoMali library. Change-Id: I4fdba05844c3589893aa1a4c11dc376ec33d4e9e Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
2016-08-22cpu, mem, sim: Change how KVM maps memoryDavid Hashe
Only map memories into the KVM guest address space that are marked as usable by KVM. Create BackingStoreEntry class containing flags for is_conf_reported, in_addr_map, and kvm_map.
2016-08-16dev: Revert 0a316996de76 [dev, sim: Added missing override...]Andreas Sandberg
This changeset reverts the changset "dev, sim: Added missing override keywords to fix CLANG compilation (OSX)" which was incorrectly rebased. Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15cpu: Add missing override in Minor's exec contextAndreas Sandberg
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15cpu: Fixed clang errors. Added 'override' keyword for virtual functions.Reiley Jeapaul
Change-Id: Ic37311443ca11ee6d95bceffea599e054e7aa110 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15mem: Print an MSHR without triggering any assertionsNikos Nikoleris
Previously printing an mshr would trigger an assertion if the MSHR was not in service or if the targets list was empty. This patch changes the print function to bypasses the accessor functions for postInvalidate and postDowngrade and avoid the relevant assertions. It also checks if the targets list is empty before calling print on it. Change-Id: Ic18bee6cb088f63976112eba40e89501237cfe62 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15dev, sim: Added missing override keywords to fix CLANG compilation (OSX)Matteo Andreozzi
Change-Id: Ice5fa11e77d06576eaa42149f5fa340a769d8b01 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-15cpu, arch: fix the type used for the request flagsNikos Nikoleris
Change-Id: I183b9942929c873c3272ce6d1abd4ebc472c7132 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
2016-08-12mem: Add support for secure packets in the snoop filterNikos Nikoleris
Secure and non-secure data can coexist in the cache and therefore the snoop filter should treat differently packets with secure and non secure accesses. This patch uses the lower bits of the line address to keep track of whether the packet is addressing secure memory or not. Change-Id: I54a5e614dad566a5083582bede86c86896f2c2c1 Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12mem: Add snoop filter to SystemXBar by defaultAndreas Hansson
This patch changes the default behaviour of the SystemXBar, adding a snoop filter. With the recent updates to the snoop filter allocation behaviour this change no longer causes problems for the regressions without caches. Change-Id: Ibe0cd437b71b2ede9002384126553679acc69cc1 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12mem: Use FromCache attribute in snoop filter allocationAndreas Hansson
This patch improves the snoop filter allocation decisions by not only looking at whether a port is snooping or not, but also if the packet actually came from a cache. The issue with only looking at isSnooping is that the CPU ports, for example, are snooping, but not actually caching. Previously we ended up incorrectly allocating entries in systems without caches (such as the atomic and timing quick regressions). Eventually these misguided allocations caused the snoop filter to panic due to an excessive size. On the request path we now include the fromCache check on the packet itself, and for responses we check if we actually have a snoop-filter entry. Change-Id: Idd2dbc4f00c7e07d331e9a02658aee30d0350d7e Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Stephan Diestelhorst <stephan.diestelhorst@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12mem: Update mostly exclusive policy even furtherAndreas Hansson
This patch takes yet another step in maintaining the clusivity, in that it allows a mostly-inclusive cache to hold on to blocks even when responding to a ReadExReq or UpgradeReq. Previously the cache simply invalidated these blocks, but there is no strict need to do so. The most important part of this patch is that we simply mark the block clean when satisfying the upstream request where the cache is allowed to keep the block. The only tricky part of the patch is in the memory management of deferred snoops, where we need to distinguish the cases where only the packet was copied (we expected to respond), and the cases where we created an entirely new packet and request (we kept it only to replay later). The code in satisfyRequest is definitely ready for some refactoring after this. Change-Id: I201ddc7b2582eaa46fb8cff0c7ad09e02d64b0fc Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12mem: Update mostly exclusive cache policy to cover more casesAndreas Hansson
This patch changes how the mostly exclusive policy is enforced to ensure that we drop blocks when we should. As part of this change, the actual invalidation due to the clusivity enforcement is moved outside the hit handling, to a separate method maintainClusivity. For the timing mode that means we can deal with all MSHR targets before taking any action and possibly dropping the block. The method satisfyCpuSideRequest is also renamed satisfyRequest as part of this change (since we only ever see requests from the cpu-side port). Change-Id: If6f3d1e0c3e7be9a67b72a55e4fc2ec4a90fd3d2 Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
2016-08-12mem: Add a FromCache packet attributeAndreas Hansson
This patch adds a FromCache attribute to the packet, and updates a number of the existing request commands to reflect that the request originates from a cache. The attribute simplifies checking if a requests came from a cache or not, and this is used by both the cache and snoop filter in follow-on patches. Change-Id: Ib0a7a080bbe4d6036ddd84b46fd45bc7eb41cd8f Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com> Reviewed-by: Steve Reinhardt <stever@gmail.com>
2016-08-10arm, dev: Add support for listing DMA ports in new platformsAndreas Sandberg
When using a Ruby memory system, the Ruby configuration scripts expect to get a list of DMA ports to create the necessary DMA sequencers. Add support in the utility functions that wire up devices to append DMA ports to a list instead of connecting them to the IO bus. These functions are currently only used by the VExpress_GEM5_V1 platform. Change-Id: I46059e46b0f69e7be5f267e396811bd3caa3ed63 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Curtis Dunham <curtis.dunham@arm.com> Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
2016-08-10ruby: Implement support for functional accesses to PIO rangesAndreas Sandberg
There are cases where we want to put boot ROMs on the PIO bus. Ruby currently doesn't support functional accesses to such memories since functional accesses are always assumed to go to physical memory. Add the required support for routing functional accesses to the PIO bus. Change-Id: Ia5b0fcbe87b9642bfd6ff98a55f71909d1a804e3 Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Jason Lowe-Power <jason@lowepower.com> Reviewed-by: Brad Beckmann <brad.beckmann@amd.com> Reviewed-by: Michael LeBeane <michael.lebeane@amd.com>
2016-08-10arm: Don't report the boot ROM as a memory in config tablesAndreas Sandberg
The boot ROM shouldn't be used as a memory by the kernel. Memories have a flag to indicate this which is set for some platforms. Update all platforms to consistently set this flag to indicate that the boot ROM shouldn't be reported as normal memory. Change-Id: I2bf0273e99d2a668e4e8d59f535c1910c745aa7b Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com> Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com> Reviewed-by: Brad Beckmann <brad.beckmann@amd.com> --HG-- extra : amend_source : c2cbda38636ea37cbe9ae6977a06b923eab5ba56
2016-08-05sim: fix issues with pwrite(); don't enable fstatfsTony Gutierrez
this patch fixes issues with changeset 11593 use the host's pwrite() syscall for pwrite64Func(), as opposed to pwrite64(), because pwrite64() does not work well on all distros. undo the enabling of fstatfs, as we will add this in a separate pate.