summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2010-11-26IGbE: return 0 on an invalid descriptor size instead of -1.Ali Saidi
Asserts where descSize() get called with assert if we end up returning 0.
2010-11-23Copyright: Add AMD copyright to the param changes I just made.Gabe Black
2010-11-23Params: Add parameter types for IP addresses in various forms.Gabe Black
New parameter forms are: IP address in the format "a.b.c.d" where a-d are from decimal 0 to 255. IP address with netmask which is an IP followed by "/n" where n is a netmask length in bits from decimal 0 to 32 or by "/e.f.g.h" where e-h are from decimal 0 to 255 and which is all 1 bits followed by all 0 bits when represented in binary. These can also be specified as an integral IP and netmask passed in separately. IP address with port which is an IP followed by ":p" where p is a port index from decimal 0 to 65535. These can also be specified as an integral IP and port value passed in separately.
2010-11-23X86: Loosen an assert for x86 and connect the APIC ports when caches are used.Gabe Black
2010-11-23X86: Obey the PCD (cache disable) bit in the page tables.Gabe Black
2010-11-22X86: Mark IO space accesses as uncachable.Gabe Black
2010-11-22IDE,X86: Fix IDE controller BAR configuration for x86.Gabe Black
2010-11-20random: small comment about our random number generator and its originNathan Binkert
2010-11-19SE: Fix simulating more than 4GB of RAM in SE modeAli Saidi
This change removes some dead code in PhysicalMemory, uses a 64 bit type for the page pointer in System (instead of 32 bit) and cleans up some style.
2010-11-19SCons: Support building without an ISAAli Saidi
2010-11-18O3: Fix fp destination register flattening, and index offset adjusting.Gabe Black
This change makes O3 flatten floating point destination registers, and also fixes misc register flattening so that it's correctly repositioned relative to the resized regions for integer and floating point indices. It also fixes some overly long lines.
2010-11-15O3: Make O3 support variably lengthed instructions.Gabe Black
2010-11-15O3: reset architetural state by calling clear()Ali Saidi
2010-11-15ARM: Add comment about the organization of the IT state registerAli Saidi
2010-11-15CPU/ARM: Add SIMD op classes to CPU models and ARM ISA.Giacomo Gabrielli
2010-11-15O3: prevent a squash when completeAcc() modifies misc reg through TC.Min Kyu Jeong
This happens on ARM instructions when they update the IT state bits. Code and associated comment was copied from execute() and initiateAcc() methods
2010-11-15ARM: Return an FailUnimp instruction when an unimplemented CP15 register is ↵Ali Saidi
accessed. Just panicing in readMiscReg() doesn't work because a speculative access in the o3 model can end the simulation.
2010-11-15SCons: Cleanup SCons output during compileAli Saidi
2010-11-15ARM: Add a Keyboard Mouse Interface controllerWilliam Wang
2010-11-15ARM: Implement a CLCD Frame bufferWilliam Wang
2010-11-15ARM: Add support for GDB on ARMWilliam Wang
--HG-- rename : src/arch/alpha/remote_gdb.cc => src/arch/arm/remote_gdb.cc
2010-11-15ARM: Make utility.hh meet style guidelinesAli Saidi
2010-11-15ARM: Add support for a dumb IDE controllerAli Saidi
2010-11-15ARM: Cache the misc regs at the TLB to limit readMiscReg() calls.Ali Saidi
2010-11-15ARM: Add support for switching CPUsAli Saidi
2010-11-15ARM: Use the correct delete operator for RFEAli Saidi
2010-11-15ARM: Fix SRS instruction to micro-code memory operation and register update.Ali Saidi
Previously the SRS instruction attempted to writeback in initiateAcc() which worked until a recent change, but was incorrect.
2010-11-15CPU: Fix bug when a split transaction is issued to a faster cacheAli Saidi
In the case of a split transaction and a cache that is faster than a CPU we could get two responses before next_tick expires. Add an event that is scheduled in this case and return false rather than asserting.
2010-11-15ARM: Do something predictable for an UNPREDICTABLE branch.Ali Saidi
2010-11-11Params: Fix an off by one error and a misleading comment.Gabe Black
2010-11-11SimObject: Add a comment near clear_child that it's unlikely to be called.Gabe Black
2010-11-11SPARC: Clean up some historical style issues.Gabe Black
2010-11-09SimObject: Use "self" when calling the clear_child method.Gabe Black
2010-11-08X86: Fix X86_FS compilation.Gabe Black
2010-11-08ARM: Add some TLB statistics for ARMAli Saidi
2010-11-08ARM: Add checkpointing supportAli Saidi
2010-11-08ARM: Add support for M5 ops in the ARM ISAAli Saidi
2010-11-08ARM: Keep the warnings to a minimum.Ali Saidi
These warnings still need to be addresses, but pages of them is counterproductive.
2010-11-08Mem: Finish half-baked support for mmaping file in physmem.Ali Saidi
Physmem has a parameter to be able to mem map a file, however it isn't actually used. This changeset utilizes the parameter so a file can be mmapped.
2010-11-08Bus: Have the I/O devices that return address ranges print them out.Ali Saidi
This way we actually get device names associated with the devices.
2010-11-08ARM: Don't return the result of a table walk the same cycle it's completed.Ali Saidi
The L1 cache may have been accessed to provide this data, which confuses it, if it ends up being accesses twice in one cycle. Instead wait 1 tick which will force the timing simple CPU to forward to its next clock cycle when the translation completes. Also prevent multiple outstanding table walks from occuring at once.
2010-11-08ARM/Alpha/Cpu: Change prefetchs to be more like normal loads.Ali Saidi
This change modifies the way prefetches work. They are now like normal loads that don't writeback a register. Previously prefetches were supposed to call prefetch() on the exection context, so they executed with execute() methods instead of initiateAcc() completeAcc(). The prefetch() methods for all the CPUs are blank, meaning that they get executed, but don't actually do anything. On Alpha dead cache copy code was removed and prefetches are now normal ops. They count as executed operations, but still don't do anything and IsMemRef is not longer set on them. On ARM IsDataPrefetch or IsInstructionPreftech is now set on all prefetch instructions. The timing simple CPU doesn't try to do anything special for prefetches now and they execute with the normal memory code path.
2010-11-08ARM: Make all ARM uops delayed commit.Ali Saidi
2010-11-08sim: Use forward declarations for ports.Ali Saidi
Virtual ports need TLB data which means anything touching a file in the arch directory rebuilds any file that includes system.hh which in everything.
2010-11-06scons: Replace the build_dir parameter to SConscript with variant_dir.Gabe Black
The build_dir parameter name has been deprecated and replaced with variant_dir. This change switches us over to avoid warning spew in newer versions of scons.
2010-10-31ISA,CPU,etc: Create an ISA defined PC type that abstracts out ISA behaviors.Gabe Black
This change is a low level and pervasive reorganization of how PCs are managed in M5. Back when Alpha was the only ISA, there were only 2 PCs to worry about, the PC and the NPC, and the lsb of the PC signaled whether or not you were in PAL mode. As other ISAs were added, we had to add an NNPC, micro PC and next micropc, x86 and ARM introduced variable length instruction sets, and ARM started to keep track of mode bits in the PC. Each CPU model handled PCs in its own custom way that needed to be updated individually to handle the new dimensions of variability, or, in the case of ARMs mode-bit-in-the-pc hack, the complexity could be hidden in the ISA at the ISA implementation's expense. Areas like the branch predictor hadn't been updated to handle branch delay slots or micropcs, and it turns out that had introduced a significant (10s of percent) performance bug in SPARC and to a lesser extend MIPS. Rather than perpetuate the problem by reworking O3 again to handle the PC features needed by x86, this change was introduced to rework PC handling in a more modular, transparent, and hopefully efficient way. PC type: Rather than having the superset of all possible elements of PC state declared in each of the CPU models, each ISA defines its own PCState type which has exactly the elements it needs. A cross product of canned PCState classes are defined in the new "generic" ISA directory for ISAs with/without delay slots and microcode. These are either typedef-ed or subclassed by each ISA. To read or write this structure through a *Context, you use the new pcState() accessor which reads or writes depending on whether it has an argument. If you just want the address of the current or next instruction or the current micro PC, you can get those through read-only accessors on either the PCState type or the *Contexts. These are instAddr(), nextInstAddr(), and microPC(). Note the move away from readPC. That name is ambiguous since it's not clear whether or not it should be the actual address to fetch from, or if it should have extra bits in it like the PAL mode bit. Each class is free to define its own functions to get at whatever values it needs however it needs to to be used in ISA specific code. Eventually Alpha's PAL mode bit could be moved out of the PC and into a separate field like ARM. These types can be reset to a particular pc (where npc = pc + sizeof(MachInst), nnpc = npc + sizeof(MachInst), upc = 0, nupc = 1 as appropriate), printed, serialized, and compared. There is a branching() function which encapsulates code in the CPU models that checked if an instruction branched or not. Exactly what that means in the context of branch delay slots which can skip an instruction when not taken is ambiguous, and ideally this function and its uses can be eliminated. PCStates also generally know how to advance themselves in various ways depending on if they point at an instruction, a microop, or the last microop of a macroop. More on that later. Ideally, accessing all the PCs at once when setting them will improve performance of M5 even though more data needs to be moved around. This is because often all the PCs need to be manipulated together, and by getting them all at once you avoid multiple function calls. Also, the PCs of a particular thread will have spatial locality in the cache. Previously they were grouped by element in arrays which spread out accesses. Advancing the PC: The PCs were previously managed entirely by the CPU which had to know about PC semantics, try to figure out which dimension to increment the PC in, what to set NPC/NNPC, etc. These decisions are best left to the ISA in conjunction with the PC type itself. Because most of the information about how to increment the PC (mainly what type of instruction it refers to) is contained in the instruction object, a new advancePC virtual function was added to the StaticInst class. Subclasses provide an implementation that moves around the right element of the PC with a minimal amount of decision making. In ISAs like Alpha, the instructions always simply assign NPC to PC without having to worry about micropcs, nnpcs, etc. The added cost of a virtual function call should be outweighed by not having to figure out as much about what to do with the PCs and mucking around with the extra elements. One drawback of making the StaticInsts advance the PC is that you have to actually have one to advance the PC. This would, superficially, seem to require decoding an instruction before fetch could advance. This is, as far as I can tell, realistic. fetch would advance through memory addresses, not PCs, perhaps predicting new memory addresses using existing ones. More sophisticated decisions about control flow would be made later on, after the instruction was decoded, and handed back to fetch. If branching needs to happen, some amount of decoding needs to happen to see that it's a branch, what the target is, etc. This could get a little more complicated if that gets done by the predecoder, but I'm choosing to ignore that for now. Variable length instructions: To handle variable length instructions in x86 and ARM, the predecoder now takes in the current PC by reference to the getExtMachInst function. It can modify the PC however it needs to (by setting NPC to be the PC + instruction length, for instance). This could be improved since the CPU doesn't know if the PC was modified and always has to write it back. ISA parser: To support the new API, all PC related operand types were removed from the parser and replaced with a PCState type. There are two warts on this implementation. First, as with all the other operand types, the PCState still has to have a valid operand type even though it doesn't use it. Second, using syntax like PCS.npc(target) doesn't work for two reasons, this looks like the syntax for operand type overriding, and the parser can't figure out if you're reading or writing. Instructions that use the PCS operand (which I've consistently called it) need to first read it into a local variable, manipulate it, and then write it back out. Return address stack: The return address stack needed a little extra help because, in the presence of branch delay slots, it has to merge together elements of the return PC and the call PC. To handle that, a buildRetPC utility function was added. There are basically only two versions in all the ISAs, but it didn't seem short enough to put into the generic ISA directory. Also, the branch predictor code in O3 and InOrder were adjusted so that they always store the PC of the actual call instruction in the RAS, not the next PC. If the call instruction is a microop, the next PC refers to the next microop in the same macroop which is probably not desirable. The buildRetPC function advances the PC intelligently to the next macroop (in an ISA specific way) so that that case works. Change in stats: There were no change in stats except in MIPS and SPARC in the O3 model. MIPS runs in about 9% fewer ticks. SPARC runs with 30%-50% fewer ticks, which could likely be improved further by setting call/return instruction flags and taking advantage of the RAS. TODO: Add != operators to the PCState classes, defined trivially to be !(a==b). Smooth out places where PCs are split apart, passed around, and put back together later. I think this might happen in SPARC's fault code. Add ISA specific constructors that allow setting PC elements without calling a bunch of accessors. Try to eliminate the need for the branching() function. Factor out Alpha's PAL mode pc bit into a separate flag field, and eliminate places where it's blindly masked out or tested in the PC.
2010-10-29X86: Fault on divide by zero instead of panicing.Gabe Black
2010-10-29X86: Make syscalls also serialize after.Gabe Black
2010-10-24O3: Get rid of a bunch of commented out lines.Gabe Black
2010-10-22X86: Make nop a regular, non-microcoded instruction.Gabe Black
Code in the CPUs that need a nop to carry a fault can't easily deal with a microcoded nop. This instruction format provides for one that isn't. --HG-- rename : src/arch/x86/isa/formats/syscall.isa => src/arch/x86/isa/formats/nop.isa