summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-05-13ARM: Break up condition codes into normal flags, saturation, and simd.Ali Saidi
This change splits out the condcodes from being one monolithic register into three blocks that are updated independently. This allows CPUs to not have to do RMW operations on the flags registers for instructions that don't write all flags.
2011-05-13Trace: Allow printing ASIDs and selectively tracing based on user/kernel code.Chander Sudanthi
Debug flags are ExecUser, ExecKernel, and ExecAsid. ExecUser and ExecKernel are set by default when Exec is specified. Use minus sign with ExecUser or ExecKernel to remove user or kernel tracing respectively.
2011-05-13ARM: Better RealView/Versatile EB platform support.Chander Sudanthi
Add registers and components to better support the VersatileEB board. Made the MIDR and SYS_ID register parameters to ArmSystem and RealviewCtrl respectively.
2011-05-13O3: Fix an issue with a load & branch instruction and mem dep squashingGeoffrey Blake
Instructions that load an address and are control instructions can execute down the wrong path if they were predicted correctly and then instructions following them are squashed. If an instruction is a memory and control op use the predicted address for the next PC instead of just advancing the PC. Without this change NPC is used for the next instruction, but predPC is used to verify that the branch was successful so the wrong path is silently executed.
2011-05-12stats: delete mysql supportNathan Binkert
we can add it back within python in some future changeset
2011-05-12stats: move code that loops over all stats into pythonNathan Binkert
2011-05-12stats: better expose statistics to python.Nathan Binkert
Build a python list and dict of all stats and expose flags properly. --HG-- rename : src/python/m5/stats.py => src/python/m5/stats/__init__.py
2011-05-09work around gcc 4.5 warningNathan Binkert
2011-05-07NetworkTest: added sim_cycles parameter to the network tester.Tushar Krishna
The network tester terminates after injecting for sim_cycles (default=1000), instead of having to explicitly pass --maxticks from the command line as before. If fixed_pkts is enabled, the tester only injects maxpackets number of packets, else it keeps injecting till sim_cycles. The tester also works with zero command line arguments now.
2011-05-07network: added Torus and Pt2Pt topologiesTushar Krishna
2011-05-07Trace: Remove the options trace-help and trace-flagsNilay Vaish
The options trace-help and trace-flags are no longer required. In there place, the options debug-help and debug-flags have been provided.
2011-05-06X86: Fix the Lldt instructions so they load the ldtr and not the tr.Gabe Black
2011-05-05ruby: use RubyMemory flag & remove setDebug() functionalityKorey Sewell
The RubyMemory flag wasnt used in the code, creating large gaps in trace output. Replace cprintfs w/dprintfs using RubyMemory in memory controller. DPRINTF also deprecate the usage of the setDebug() pure virtual function in the AbstractMemoryOrCache Class as well the m_debug/cprintf functions in MemoryControl.hh/cc
2011-05-04ARM: Add support for loading the a bootloader and configuring parameters for itAli Saidi
2011-05-04ARM: Implement WFE/WFI/SEV semantics.Prakash Ramrakhyani
2011-05-04ARM: Add support for MP misc regs and broadcast flushes.Ali Saidi
2011-05-04ARM: Make GIC handle IPIs and multiple processors.Prakash Ramrakhyani
2011-05-04ARM: Add snoop control unit device.Ali Saidi
2011-05-04ARM: Add support for some more registers in the real view controller.Ali Saidi
2011-05-04Debug: Add a function to cause the simulator to create a checkpoint from GDB.Ali Saidi
2011-05-04CPU: Add some useful debug message to the timing simple cpu.Ali Saidi
2011-05-04CPU: Fix a case where timing simple cpu faults can nest.Ali Saidi
If we fault, change the state to faulting so that we don't fault again in the same cycle.
2011-05-04O3: Remove assertion for case that is actually handled in code.Ali Saidi
If an nonspeculative instruction has a fault it might not be in the nonSpecInsts map.
2011-05-04Core: Add some documentation about the sim clocks.Ali Saidi
2011-05-04RealView: Fix the 24 and 100MHz clocks which were providing incorrect values.Chris Emmons
2011-05-04O3: Fix a small corner case with the lsq hazard detection logic.Ali Saidi
2011-05-04ARM: Add vfpv3 support to native trace.Ali Saidi
2011-05-04ARM: Fix small bug with vcvt instructionAli Saidi
2011-05-04debug: fix help outputNathan Binkert
2011-05-02ruby: dbg: use system ticks instead of cyclesKorey Sewell
2011-04-28network: set the ExtLink bw to 16 bytesBrad Beckmann
Therefore all links by default are 16 bytes wide and thus work with Garnet's uniform link bandwidth assumption.
2011-04-28garnet: removed flit_width from RoutersBrad Beckmann
2011-04-28network: adjusted default endpoint bandwidthBrad Beckmann
The simple network's endpoint bandwidth value is used to adjust the overall bandwidth of the network. Specifically, the ration between endpoint bandwidth and the MESSAGE_SIZE_MULTIPLIER determines the increase. By setting the value to 1000, that means the bandwdith factor specified in the links translates to the link bandwidth in bytes. Previously, it was increasing that value by 10. This patch will likely require a reset of the ruby regression tester stats.
2011-04-28network: removed the unused network-wide latency paramBrad Beckmann
2011-04-28network: moved network config paramsBrad Beckmann
Moved the buffer_size, endpoint_bandwidth, and adaptive_routing params out of the top-level parent network object and to only those networks that actually use those parameters.
2011-04-28network: basic link bw for garnet and simple networksBrad Beckmann
This patch ensures that both Garnet and the simple networks use the bw value specified in the topology. To do so, the patch generalizes the specification of bw for basic links. This value is then translated to the specific value used by the simple and Garnet networks. Since Garent does not support non-uniformed link bandwidth, the patch also adds a check to ensure all bws are equal. --HG-- rename : src/mem/ruby/network/BasicLink.cc => src/mem/ruby/network/simple/SimpleLink.cc rename : src/mem/ruby/network/BasicLink.hh => src/mem/ruby/network/simple/SimpleLink.hh rename : src/mem/ruby/network/BasicLink.py => src/mem/ruby/network/simple/SimpleLink.py
2011-04-28network: convert links & switches to first class C++ SimObjectsBrad Beckmann
This patch converts links and switches from second class simobjects that were virtually ignored by the networks (both simple and Garnet) to first class simobjects that directly correspond to c++ ojbects manipulated by the topology and network classes. This is especially true for Garnet, where the links and switches directly correspond to specific C++ objects. By making this change, many aspects of the Topology class were simplified. --HG-- rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/BasicLink.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/BasicLink.hh rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.hh rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetLink_d.py rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/fixed-pipeline/GarnetRouter_d.py rename : src/mem/ruby/network/Network.cc => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.cc rename : src/mem/ruby/network/Network.hh => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.hh rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetLink.py rename : src/mem/ruby/network/garnet/fixed-pipeline/GarnetNetwork_d.py => src/mem/ruby/network/garnet/flexible-pipeline/GarnetRouter.py
2011-04-28garnet: cleaned up flexible network header fileBrad Beckmann
2011-04-28ruby: moved topology to the top network directoryBrad Beckmann
Moved the Topology class to the top network directory because it is shared by both the simple and Garnet networks. --HG-- rename : src/mem/ruby/network/simple/Topology.cc => src/mem/ruby/network/Topology.cc rename : src/mem/ruby/network/simple/Topology.hh => src/mem/ruby/network/Topology.hh
2011-04-28ruby: removed dated comment in SimpleNetworkBrad Beckmann
2011-04-28event: fix PythonEventNathan Binkert
order of %includes since they matter for this case
2011-04-25base: include types.hh in base/stats/mysql.hhNilay Vaish
Due to certain changes made via changeset 8229, the compilation was failing in certain cases. The compiler pointed to base/stats/mysql.hh for not naming a certain types like uint64_t. To rectify this, base/types.hh is being included in base/stats/mysql.hh.
2011-04-23X86: When decoding a memory only inst, fault on reg encodings, don't assert.Gabe Black
This change makes the decoder figure out if an instruction that only supports memory is using a register encoding and decodes directly to "Unknown" which will behave appropriately. This prevents other parts of the instruction creation process from seeing the mismatch and asserting.
2011-04-20stats: ensure that stat names are validNathan Binkert
2011-04-20stats: one more name violationNathan Binkert
2011-04-20fix some build problems from prior changesetsNathan Binkert
2011-04-20stats: add user settable separator string for arrayed statsBrad Danofsky
Default is '::', so no visible change unless it is overridden
2011-04-20scons: Allow the build directory live under an EXTRAS directoryBrad Danofsky
2011-04-19stats: rename stats so they can be used as python expressionsNathan Binkert
2011-04-19python: different import for dealing with demandimportNathan Binkert