| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed at http://reviews.gem5.org/r/3801/
|
|
Assertion in the respondEvent erroneously fired.
The assertion verifies that the controller has not moved to a low-power
state prior to receiving read data from the memory.
The original assertion triggered if the state was not:
PWR_IDLE or PWR_ACT.
In the case that failed, a periodic refresh event occurred around the
read. The REF is stalled until the final read burst is issued
and the subsequent PRE closes the bank. While the PRE will temporarily
move the state to PWR_IDLE, state will immediately transition to PWR_REF
due to the pending refresh operation. This state does not match the
assertion, which is subsequently triggered.
Fixed the assertion by explicitly checking that the state is not a low
power state
!PWR_SREF && !PWR_PRE_PDN && !PWR_ACT_PDN
Change-Id: I82921a733bbeac2bcb5a487c2f981448d41ed50b
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
KvmGic functionality has been subsumed within the new MuxingKvmGic
model, which has Pl390 fallback when not using KVM for fast emulation.
This simplifies configuration and will enable checkpointing between
KVM emulation and full-system simulation.
Change-Id: Ie61251720064c512843015c075e4ac419a4081e8
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Automatically use the MuxingKvmGic in the VExpress_GEM5_V1
platform. This removes the need to patch the host kernel or the
platform configuration when using KVM on ARM.
Change-Id: Ib1ed9b3b849b80c449ef1b62b83748f3f54ada26
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
This device allows us to, when KVM support is detected and compiled in,
instantiate the same Gic device whether the actual simulation is with
KVM cores or simulated cores. Checkpointing is not yet supported.
Change-Id: I67e4e0b6fb7ab5058e52c933f4f3d8e7ab24981e
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
A KVM VM is typically a child of the System object already, but for
solving future issues with configuration graph resolution, the most
logical way to keep track of this object is for it to be an actual
parameter of the System object.
Change-Id: I965ded22203ff8667db9ca02de0042ff1c772220
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Ifc65d42eebfd109c1c622c82c3c3b3e523819e85
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Names of DRAM configurations were updated to reflect both
the channel and device data width.
Previous naming format was:
<DEVICE_TYPE>_<DATA_RATE>_<CHANNEL_WIDTH>
The following nomenclature is now used:
<DEVICE_TYPE>_<DATA_RATE>_<n>x<w>
where n = The number of devices per rank on the channel
x = Device width
Total channel width can be calculated by n*w
Example:
A 64-bit DDR4, 2400 channel consisting of 4-bit devices:
n = 16
w = 4
The resulting configuration name is:
DDR4_2400_16x4
Updated scripts to match new naming convention.
Added unique configurations for DDR4 for:
1) 16x4
2) 8x8
3) 4x16
Change-Id: Ibd7f763b7248835c624309143cb9fc29d56a69d1
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
The rr arbiter pointer in garnet was getting updated on every request,
even if there is no grant. This was leading to a huge variance in wait
time at a router at high injection rates.
This patch corrects it to update upon a grant.
|
|
Rather than having the 1st line on the Log line and every other line on its
own, add a new line to have a common format for all of them. Makes parsing
a lot easier.
Reviewed at http://reviews.gem5.org/r/3808/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When in 64-bit mode, if the stack is accessed implicitly by an instruction
the alternate address prefix should be ignored if present.
This patch adds an extra flag to the ldstop which signifies when the
address override should be ignored. Then, for all of the affected
instructions, this patch adds two options to the ld and st opcode to use
the current stack addressing mode for all addresses and to ignore the
AddressSizeFlagBit. Finally, this patch updates the x86 TLB to not
truncate the address if it is in 64-bit mode and the IgnoreAddrSizeFlagBit
is set.
This fixes a problem when calling __libc_start_main with a binary that is
linked with a recent version of ld. This version of ld uses the address
override prefix (0x67) on the call instruction instead of a nop.
Note: This has not been tested in compatibility mode and only the call
instruction with the address override prefix has been tested.
See [1] page 9 (pdf page 45)
For instructions that are affected see [1] page 519 (pdf page 555).
[1] http://support.amd.com/TechDocs/24594.pdf
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
In some newer Linux distributions, env python default to Python 3.0. This
patch explicitly uses "python2" instead of just "python" for all scripts
that use #!
Reported-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The Request constructor requires a MasterID. However, an external
transactor has no chance of getting a MasterID as it does not have a
pointer to the System. This patch adds a MasterID to ExternalMaster to
allow external modules to easily genrerate new Requests.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The CxxConfigManager schould create objects by traversing the object tree
starting from the root object. However, currently objects are created in
aplphabetical order, which only works if the root object alphabetically
comes before any system object (e.g. 'root' < 'system'. Otherwise (e.g.
'a_system' < 'root'), object construction may fail. The reason for this
behaviour is, that the call to findObject() in the sorting code also
constructs the object if it is not yet existent. Then findTraversalOrder()
calls findObject("root") and subseqeuently calls findObject() on all the
children, and so on. However, the call to findTraversalOrder() is
redundant, since all objects are already created in alphabetical order.
This patch simply removes the alphabetical ordering, leading to the objects
being created starting from 'root'.
Reviewed at http://reviews.gem5.org/r/3778/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Seeing build breakage after brandon@11801:
[ CXX] X86/sim/process.cc -> .o build/X86/sim/process.cc:137:64:
error: field '_pid' is uninitialized when used here
[-Werror,-Wuninitialized] static_cast<PageTableBase *>(new
ArchPageTable(name(), _pid, system)) : ^ build/X86/sim/process.cc:138:64:
error: field '_pid' is uninitialized when used here
[-Werror,-Wuninitialized] static_cast<PageTableBase *>(new
FuncPageTable(name(), _pid))), ^ 2 errors generated.
Testing Done: Compiles now on FreeBSD 10 with clang.
Reviewed at http://reviews.gem5.org/r/3804/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
See developers mailing list. Trying to unbreak statfs.
Testing Done:
Builds on FreeBSD now.
Reviewed at http://reviews.gem5.org/r/3803/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
There are drivers writing to WUFC uncondtionally of anything. In order to
not panic gem5 in these cases, ignore writes to WUFC and WUS as we do for
WUC. Similarly return 0 (default reset value) on reads.
Testing Done: Booted in FS with such a driver revision which would
previously panic and now boots fine.
Reviewed at http://reviews.gem5.org/r/3791/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Trying to read MISCREG_CTR_EL0 on AArch64 returned 0 as is was not
implmemented. With that an operating system relying on the cache line
sizes reported in order to manage the caches would (a) panic given the
returned value 0 is not valid (high bit is RES1) or (b) worst case would
assume a cache line size of 4 doing a tremendous amount of extra
instruction work (including fetching). Return the same values as for ARMv7
as the fields seem to be the same, or RES0/1 seem to be reported
accordingly for AArch64
In collaboration with: Andrew Turner
Testing Done: Checked on FreeBSD boots with extra printfs; also observed a
reduction of a factor of about 10 in instruction fetches for a simple
micro-test.
Reviewed at http://reviews.gem5.org/r/3667/
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Python's header files set various compiler macros (e.g.,
_XOPEN_SOURCE) unconditionally. This triggers preprocessor warnings
that end up being treated as errors. The Python integration manual [1]
strongly recommends that Python.h is included before any system
header. The style guide used to mandate that Python.h is included
first in any file that needs it. This requirement was changed to
always include a source file's main header first, which ended up
triggering these errors.
This change updates the style checker to always include Python.h
before the main header file.
[1] https://docs.python.org/2/extending/extending.html
Change-Id: Id6a4f7fc64a336a8fd26691a0ca682abeb1d1579
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
|
|
protoc v3 introduces a new syntax for proto files and warns when the
syntax is not explicitly stated.
protoc relies on the fact that undefined preprocessor symbols are
explanded to 0 but since we use -Wundef they end up generating
warnings.
Change-Id: If07abeb54e932469c8f2c4d38634a97fdae40f77
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
By default, doSyscall gets the values of six registers to be used for
system call arguments. RISC-V, by convention, only has four. Because
RISC-V's implementation of these indices is as arrays of integers rather
than as base indices plus offsets, trying to get the fifth argument
register's value will cause a crash. This patch fixes that by returning 0
for any index higher than 3.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Swig wrappers for native objects currently share the _m5.internal name
space with Python code. This is undesirable if we ever want to switch
from Swig to some other framework for native binding (e.g., PyBind11
or Boost::Python). This changeset moves all of such wrappers to the
_m5 namespace, which is now reserved for native code.
Change-Id: I2d2bc12dbc05b57b7c5a75f072e08124413d77f3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
|
|
Used cppclean to help identify useless includes and removed them. This
involved erroneously included headers, but also cases where forward
declarations could have been used rather than a full include.
|
|
|
|
the GPUCoalescer code is used in the ruby profiler regardless of
whether or not the coalescer code has been compiled, which can
lead to link/run time errors. here we add #ifdefs to guard the
usage of GPUCoalescer code. eventually we should refactor this
code to use probe points.
|
|
Garnet's NetworkInterface does not consider the size of MessageBuffers when
ejecting a Message from the network. Add a size check for the MessageBuffer
and only enqueue if space is available. If space is not available, the
message if placed in a queue and the credit is held. A callback from the
MessageBuffer is implemented to wake the NetworkInterface. If there are
messages in the stalled queue, they are processed first, in a FIFO manner
and if succesfully ejected, the credit is finally sent back upstream. The
maximum size of the stall queue is equal to the number of valid VNETs
with MessageBuffers attached.
|
|
This patch is an updated version of /r/3297.
"The most important statistic for measuring memory hierarchy performance is
throughput, which is affected by independent variables, buffer sizing and
communication latency. It is difficult/impossible to debug performance issues
through series buffers without knowing which are the bottlenecks. For finite
buffers, this patch adds statistics for the average number of messages in the
buffer, the occupancy of the buffer slots, and number of message stalls."
|
|
The NetworkInterface wakeup currently iterates over all VNETs and breaks the
loop if a VNET is unable to allocate a VC. This can cause a deadlock if a
lower numbered VNET is unable to allocate a VC while a higher numbered VNET
has idle VCs. This seems like a bug as Garnet 1.0 uses a while loop over an
if-statement, suggesting the break was intended for this while loop. This
patch removes the break statement, which allows up to one message to be
dequeued from a VNET and injected into the network.
|
|
The class was crammed into syscall_emul.hh which has tons of forward
declarations and template definitions. To clean it up a bit, moved the
class into separate files and commented the class with doxygen style
comments. Also, provided some encapsulation by adding some accessors and
a mutator.
The syscallreturn.hh file was renamed syscall_return.hh to make it consistent
with other similarly named files in the src/sim directory.
The DPRINTF_SYSCALL macro was moved into its own header file with the
include the Base and Verbose flags as well.
--HG--
rename : src/sim/syscallreturn.hh => src/sim/syscall_return.hh
|
|
|
|
The CountedDrainEvent event was used to keep track of objects that
required additional simulation to drain. It was removed as a part of
the great drain rewrite, but the declaration remained.
Change-Id: I767a3213669040d3f27e2afafa2e4a5bb997e325
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
Call the stat visitor from the stat itself rather than casting stats
in Python. This reduces the number of ways visitors are called.
Change-Id: Ic4d0b7b32e3ab9897b9a34cd22d353f4da62d738
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joseph.gross@amd.com>
|
|
The headers declared in export_method_cxx_predecls are redundant since a
SimObject's main header is automatically included.
Change-Id: Ied9e84630b36960e54efe91d16f8c66fba7e0da0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Joe Gross <joseph.gross@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When restoring from a checkpoint, the simulation used to use file handles from
the checkpoint. This disallows multiple separate restore simulations from using
separate input and output files and directories, and plays havoc when the
checkpointed file locations may have changed. Add handling to allow the command
line specified files to be used as input/output for the restored simulation
(Note: this is the similar functionality to FS mode for output and error).
|
|
This patch implements an L-TAGE predictor, based on André Seznec's code
available from CBP-2
(http://hpca23.cse.tamu.edu/taco/camino/cbp2/cbp-src/realistic-seznec.h).
Signed-off-by Jason Lowe-Power <jason@lowepower.com>
|
|
The Minor and o3 cpu models share the branch prediction
code. Minor relies on the BPredUnit::squash() function
to update the branch predictor tables on a branch mispre-
diction. This is fine because Minor executes in-order, so
the update is on the correct path. However, this causes the
branch predictor to be updated on out-of-order branch
mispredictions when using the o3 model, which should not
be the case.
This patch guards against speculative update of the branch
prediction tables. On a branch misprediction, BPredUnit::squash()
calls BpredUnit::update(..., squashed = true). The underlying
branch predictor tests against the value of squashed. If it is
true, it restores any speculatively updated internal state
it might have (e.g., global/local branch history), then returns.
If false, it updates its prediction tables. Previously, exist-
ing predictors did not test against the "squashed" parameter.
To accomodate for this change, the Minor model must now call
BPredUnit::squash() then BPredUnit::update(..., squashed = false)
on branch mispredictions. Before, calling BpredUnit::squash()
performed the prediction tables update.
The effect is a slight MPKI improvement when using the o3
model. A further patch should perform the same modifications
for the indirect target predictor and BTB (less critical).
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The tournament predictor is presented as doing speculative
update of the global history and non-speculative update
of the local history used to generate the branch prediction.
However, the code does speculative update of both histories.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
The target of taken conditional direct branches does not
need to be resolved in IEW: the target can be computed at
decode, usually using the decoded instruction word and the PC.
The higher-than-necessary penalty is taken only on conditional
branches that are predicted taken but miss in the BTB. Thus,
this is mostly inconsequential on IPC if the BTB is big/associative
enough (fewer capacity/conflict misses). Nonetheless, what gem5
simulates is not representative of how conditional branch targets
can be handled.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
cachePorts currently constrains the number of store packets written to the
D-Cache each cycle), but loads currently affect this variable. This leads
to unexpected congestion (e.g., setting cachePorts to a realistic 1 will
in fact allow a store to WB only if no loads have accessed the D-Cache
this cycle). In the absence of arbitration, this patch decouples how many
loads can be done per cycle from how many stores can be done per cycle.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
When Ruby controllers stall messages in MessageBuffers, the buffer moves those
messages off the priority heap and into a per-address stall map. When buffers
are finite-sized, the test areNSlotsAvailable() only checks the size of the
priority heap, but ignores the stall map, so the map is allowed to grow
unbounded if the controller stalls numerous messages. This patch fixes the
problem by tracking the stall map size and testing the total number of messages
in the buffer appropriately.
|
|
|
|
the iterator declared in DMASequencer::ackCallback() is only used in an
assert, this causes clang to fail when building fast. here we move
the find call on the request table directly into the assert.
|
|
Change-Id: Id4cd839c12b70616017a5830e3f9bbb59b0f97ba
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Compute the proper values of the aforementioned registers from
the system configuration rather than configuring the values themselves.
Change-Id: If9774b6610a29568b80ae4866107b9a6a5b5be0f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Compute the proper values of the aforementioned registers from
the system configuration rather than configuring the values themselves.
Change-Id: Ie7685b5d8b5f2dd9d6380b4af74f16d596b2bfd1
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: I4e9e8f264a4a4239dd135a6c7a1c8da213b6d345
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
