summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-05-05mem, alpha: Move Alpha-specific request flagsAndreas Sandberg
Move Alpha-specific memory request flags to an architecture-specific header and map them to the architecture specific flag bit range.
2015-05-05arm: Remove unnecessary boot uncachabilityAndreas Hansson
With the recent patches addressing how we deal with uncacheable accesses there is no longer need for the work arounds put in place to enforce certain sections of memory to be uncacheable during boot.
2015-05-05mem: Snoop into caches on uncacheable accessesAndreas Hansson
This patch takes a last step in fixing issues related to uncacheable accesses. We do not separate uncacheable memory from uncacheable devices, and in cases where it is really memory, there are valid scenarios where we need to snoop since we do not support cache maintenance instructions (yet). On snooping an uncacheable access we thus provide data if possible. In essence this makes uncacheable accesses IO coherent. The snoop filter is also queried to steer the snoops, but not updated since the uncacheable accesses do not allocate a block.
2015-05-05arch, cpu: Do not forward snoops to table walkerAndreas Hansson
This patch simplifies the overall CPU by changing the TLB caches such that they do not forward snoops to the table walker port(s). Note that only ARM and X86 are affected. There is no reason for the ports to snoop as they do not actually take any action, and from a performance point of view we are better of not snooping more than we have to. Should it at a later point be required to snoop for a particular TLB design it is easy enough to add it back.
2015-05-05mem: Pass shared downstream through cachesAndreas Hansson
This patch ensures that we pass on information about a packet being shared (rather than exclusive), when forwarding a packet downstream. Without this patch there is a risk that a downstream cache considers the line exclusive when it really isn't.
2015-05-05mem: Add forward snoop check for HardPFReqsAli Jafri
We should always check whether the cache is supposed to be forwarding snoops before generating snoops.
2015-05-05mem: Add missing stats update for uncacheable MSHRsAndreas Hansson
This patch adds a missing counter update for the uncacheable accesses. By updating this counter we also get a meaningful average latency for uncacheable accesses (previously inf).
2015-05-05mem: Tidy up BaseCache parametersAndreas Hansson
This patch simply tidies up the BaseCache parameters and removes the unused "two_queue" parameter.
2015-05-05mem: Remove templates in cache modelDavid Guillen
This patch changes the cache implementation to rely on virtual methods rather than using the replacement policy as a template argument. There is no impact on the simulation performance, and overall the changes make it easier to modify (and subclass) the cache and/or replacement policy.
2015-05-05cpu: Work around gcc 4.9 issues with Num_OpClassesAndreas Hansson
This patch fixes a recent issue with gcc 4.9 (and possibly more) being convinced that indices outside the array bounds are used when initialising the FUPool members.
2015-04-29arch, base, dev, kern, sym: FreeBSD supportRuslan Bukin
This adds support for FreeBSD/aarch64 FS and SE mode (basic set of syscalls only) Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-29mem: Simplify page close checks for adaptive policiesRizwana Begum
Both open_adaptive and close_adaptive page polices keep the page open if a row hit is found. If a row hit is not found, close_adaptive page policy precharges the row, and open_adaptive policy precharges the row only if there is a bank conflict request waiting in the queue. This patch makes the checks for above conditions simpler. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-29ruby: set: replace long by unsigned longNilay Vaish
UBSan complains about negative value being shifted
2015-04-29cpu: o3: replace issueLatency with bool pipelinedNilay Vaish
Currently, each op class has a parameter issueLat that denotes the cycles after which another op of the same class can be issued. As of now, this latency can either be one cycle (fully pipelined) or same as execution latency of the op (not at all pipelined). The fact that issueLat is a parameter of type Cycles makes one believe that it can be set to any value. To avoid the confusion, the parameter is being renamed as 'pipelined' with type boolean. If set to true, the op would execute in a fully pipelined fashion. Otherwise, it would execute in an unpipelined fashion.
2015-04-29cpu: o3: single cycle default div microop latency on x86Nilay Vaish
This patch sets the default latency of the division microop to a single cycle on x86. This is because the division instructions DIV and IDIV have been implemented as loops of div microops, where each microop computes a single bit of the quotient.
2015-04-29x86: change divide-by-zero fault to divide-errorNilay Vaish
Same exception is raised whether division with zero is performed or the quotient is greater than the maximum value that the provided space can hold. Divide-by-Zero is the AMD terminology, while Divide-Error is Intel's.
2015-04-24misc: Appease gcc 5.1 without moving GDB_REG_BYTESAndreas Hansson
This patch rolls back the move of the GDB_REG_BYTES constant, and instead adds M5_VAR_USED.
2015-04-23arm, dev: Add a UFS deviceRene de Jong
This patch introduces a UFS host controller and a UFS device. More information about the UFS standard can be found at the JEDEC site: http://www.jedec.org/standards-documents/results/jesd220 Note that the model does not implement the complete standard, and as such is not an actual implementation of UFS. The following SCSI commands are implemented: inquiry, read, read capacity, report LUNs, start/stop, test unit ready, verify, write, format unit, send diagnostic, synchronize cache, mode select, mode sense, request sense, unmap, write buffer and read buffer. This is sufficient for usage with Linux and Android. To interact with this model a kernel version 3.9 or above is needed.
2015-04-23arm, dev: Add a NAND flash timing modelRene de Jong
This adds a NAND flash timing model. This model takes the number of planes into account and is ultimately intended to be used as a high-level performance model for any device using flash. To access the memory, use either readMemory or writeMemory. To make use of the model you will need an interface model such as UFSHostDevice, which is part of a separate patch. At the moment the flash device is part of the ARM device tree since the only use if the UFSHostDevice, and that in turn relies on the ARM GIC.
2015-04-23dev: Add support for i2c devicesPeter Enns
This patch adds an I2C bus and base device. I2C is used to connect a variety of sensors, and this patch serves as a starting point to enable a range of I2C devices.
2015-04-23misc: Appease gcc 5.1Andreas Hansson
This patch fixes a few small issues to ensure gem5 compiles when using gcc 5.1. First, the GDB_REG_BYTES in the RemoteGDB header are, rather surprisingly, flagged as unused for both ARM and X86. Removing them, however, causes compilation errors as they are actually used in the source file. Moving the constant into the class definition fixes the issue. Possibly a gcc bug. Second, we have an unused EthPktData constructor using auto_ptr, and the latter is deprecated. Since the code is never used it is simply removed.
2015-04-22cpu: remove conditional check (count > 0) on o3 IQ squashesBrandon Potter
The o3 cpu instruction queue model uses the count variable to track the number of unissued instructions in the queue. Previously, the squash method used this variable to avoid executing the doSquash method when there were no unissued instructions in the pipeline. A corner case problem exists when only issued instructions exist in the pipeline and a squash occurs; the doSquash code is not invoked and subsequently does not clean up state properly.
2015-04-22syscall_emul: implement clock_gettime system callBrandon Potter
2015-04-22syscall_emul: update x86 syscall tableMonir Mozumder
Update table with additional definitions through Linux 3.13.
2015-04-22syscall_emul: update getrlimit to use warnBrandon Potter
Don't use std::cerr directly, and just return EINVAL instead of aborting.
2015-04-22syscall_emul: fix warning with wrong syscall nameBrandon Potter
Also nix extra whitespace.
2015-04-22base: add new ChunkGenerator method to identify last chunkBrandon Potter
2015-04-20cpu: Remove the InOrderCPU from the treeAndreas Hansson
This patch takes the final step in removing the InOrderCPU from the tree. Rest in peace. The MinorCPU is now used to model an in-order microarchitecture, and long term the MinorCPU will eventually be renamed InOrderCPU.
2015-04-14config, cpu: fix progress interval for switched CPUsMalek Musleh
This patch ensures that the CPU progress Event is triggered for the new set of switched_cpus that get scheduled (e.g. during fast-forwarding). it also avoids printing the interval state if the cpu is currently switched out. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-13cpu: re-organizes the branch predictor structure.Dibakar Gope
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-13x86: implements x87 mult/div instructionsNilay Vaish
2015-04-13ruby: allow restoring from checkpoint when using DRAMCtrlLena Olson
Restoring from a checkpoint with ruby + the DRAMCtrl memory model was not working, because ruby and DRAMCtrl disagreed on the current tick during warmup. Since there is no reason to do timing requests during warmup, use functional requests instead. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-13sim: Use NULL instead of None for testing filenames.Nilay Vaish
The filenames are initialized with NULL. So the test should be checking for them to be == NULL instead == None.
2015-04-13sim: fix function for emulating dup()Nilay Vaish
The function was using the host fd to obtain the fd object from the simulated process.
2015-04-08config: Support full-system with SST's memory systemCurtis Dunham
This patch adds an example configuration in ext/sst/tests/ that allows an SST/gem5 instance to simulate a 4-core AArch64 system with SST's memHierarchy components providing all the caches and memories.
2015-04-03dev: (un)serialize fix for the RTC and RTC Timer Interrupt eventsNikos Nikoleris
Restoring from a checkpoint fails if either the RTC or the RTC Timer Interrrupt event is disabled. The restored machine tried incorrectly to schedule the next event with negative offset. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03sim: correct check for endianessRuslan Bukin
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03dev: Extend access width for IDE control registersRuslan Bukin
Add 32-bit access width for PrimaryTiming register and 16bit for UDMAControl register as FreeBSD required. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-04-03cpu: fix system total instructions accountingNikos Nikoleris
The totalInstructions counter is only incremented when the whole instruction is commited and not on every microop. It was incorrectly reset in atomic and timing cpus. Committed by: Nilay Vaish <nilay@cs.wisc.edu>"
2015-04-03x86: fix debug trace output for mwaitLena Olson
When running with the Exec flag, the mwait instruction attempted to print out its source registers, which were never actually initialized. This led to sporadic assertion failures when the value stored there was invalid. Committed by: Nilay Vaish <nilay@cs.wisc.edu>
2015-03-27mem: Support any number of master-IDs in stride prefetcherStephan Diestelhorst
The stride prefetcher had a hardcoded number of contexts (i.e. master-IDs) that it could handle. Since master IDs need to be unique per system, and every core, cache etc. requires a separate master port, a static limit on these does not make much sense. Instead, this patch adds a small hash map that will map all master IDs to the right prefetch state and dynamically allocates new state for new master IDs.
2015-03-27mem: Allocate cache writebacks before new MSHRsAndreas Hansson
This patch changes the order of writeback allocation such that any writebacks resulting from a tag lookup (e.g. for an uncacheable access), are added to the writebuffer before any new MSHR entries are allocated. This ensures that the writebacks logically precedes the new allocations. The patch also changes the uncacheable flush to use proper timed (or atomic) writebacks, as opposed to functional writes.
2015-03-27mem: Cleanup flow for uncacheable accessesAndreas Hansson
This patch simplifies the code dealing with uncacheable timing accesses, aiming to align it with the existing miss handling. Similar to what we do in atomic, a timing request now goes through Cache::access (where the block is also flushed), and then proceeds to ignore any existing MSHR for the block in question. This unifies the flow for cacheable and uncacheable accesses, and for atomic and timing.
2015-03-27mem: Ignore uncacheable MSHRs when finding matchesAndreas Hansson
This patch changes how we search for matching MSHRs, ignoring any MSHR that is allocated for an uncacheable access. By doing so, this patch fixes a corner case in the MSHRs where incorrect data ended up being copied into a (cacheable) read packet due to a first uncacheable MSHR target of size 4, followed by a cacheable target to the same MSHR of size 64. The latter target was filled with nonsense data.
2015-03-27mem: Remove redundant allocateUncachedReadBuffer in cacheAndreas Hansson
This patch removes the no-longer-needed allocateUncachedReadBuffer. Besides the checks it is exactly the same as allocateMissBuffer and thus provides no value.
2015-03-27mem: Modernise MSHR iterators to C++11Andreas Hansson
This patch updates the iterators in the MSHR and MSHR queues to use C++11 range-based for loops. It also does a bit of additional house keeping.
2015-03-27mem: Align all MSHR entries to block boundariesAndreas Hansson
This patch aligns all MSHR queue entries to block boundaries to simplify checks for matches. Previously there were corner cases that could lead to existing entries not being identified as matches. There are, rather alarmingly, a few regressions that change with this patch.
2015-03-27mem: Rename PREFETCH_SNOOP_SQUASH flag to BLOCK_CACHEDAli Jafri
This patch subsumes the PREFETCH_SNOOP_SQUASH flag with the more generic BLOCK_CACHED flag. Future patches implementing cache eviction messages can use the BLOCK_CACHED flag in almost the same manner as hardware prefetches use the PREFETCH_SNOOP_SQUASH flag. The PREFTECH_SNOOP_FLAG is set if the prefetch target is found in the tags or the MSHRs in any state, so we are simply replacing calls to setPrefetchSquashed() with setBlockCached(). The case of where the prefetch target is found in the writeback MSHRs of upper level caches continues to be covered by the MEM_INHIBIT flag.
2015-03-26sim: Update limit_event reuse to final versionCurtis Dunham
Matching final version on reviewboard.
2015-03-26cpu: Fix InstPBTrace inheritanceAndreas Hansson
This patch fixes an issue that prevented gem5 to be built with C++ config and without Python.