| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
the RequestDesc was previously implemented as a std::pair, which made
the implementation overly complex and error prone. here we encapsulate the
packet, primary, and secondary types all in a single data structure with
all members properly intialized in a ctor
|
|
Improve PL011 console interactivity
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Read() should not write anything when returning 0 (EOF).
This patch does not correct the same bug occuring for :
nbr_read=read(file, buf, nbytes)
When nbr_read<nbytes, nbytes bytes are copied into the virtual
RAM instead of nbr_read. If buf is smaller than nbytes, a
page fault occurs, even if buf is in fact bigger than nbr_read.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
Modify the opClass assigned to AArch64 FP instructions from SimdFloat* to
Float*. Also create the FloatMemRead and FloatMemWrite opClasses, which
distinguishes writes to the INT and FP register banks.
Change the latency of (Simd)FloatMultAcc to 5, based on the Cortex-A72,
where the "latency" of FMADD is 3 if the next instruction is a FMADD and
has only the augend to destination dependency, otherwise it's 7 cycles.
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
|
|
ClockedObject was changed to require its regStats() to be called from every
child class. If you forget to do this, the error was indecipherable. This
patch makes the error more clear.
|
|
Change-Id: I763cffe0c69f5ebbbf6a6eb12bec5c13d5d0161d
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
Added power-down state transitions to the DRAM controller model.
Added per rank parameter, outstandingEvents, which tracks the number
of outstanding command events and is used to determine when the
controller should transition to a low power state.
The controller will only transition when there are no outstanding events
scheduled and the number of command entries for the given rank is 0.
The outstandingEvents parameter is incremented for every RD/WR burst,
PRE, and REF event scheduled. ACT is implicitly covered by RD/WR
since burst will always issue and complete after a required ACT.
The parameter is decremented when the event is serviced (completed).
The controller will automatically transition to ACT power down,
PRE power down, or SREF.
Transition to ACT power down state scheduled from:
1) The RespondEvent, where read data is received from the memory.
ACT power-down entry will be scheduled when one or more banks is
open, all commands for the rank have completed (no more commands
scheduled), and there are no commands in queue for the rank
Transition to PRE power down scheduled from:
1) respondEvent, when all banks are closed, all commands have
completed, and there are no commands in queue for the rank
2) prechargeEvent when all banks are closed, all commands have
completed, and there are no commands in queue for the rank
3) refreshEvent, after the refresh is complete when the previous
state was ACT power-down
4) refreshEvent, after the refresh is complete when the previous
state was PRE power-down and there are commands in the queue.
Transition to SREF will be scheduled from:
1) refreshEvent, after the refresh is completes when the previous
state was PRE power-down with no commands in queue
Power-down exit commands are scheduled from:
1) The refreshEvent, prior to issuing a refresh
2) doDRAMAccess, to wake-up the rank for RD/WR command issue.
Self-refresh exit commands are scheduled from:
1) The next request event, when the queue has commands for the rank
in the readQueue or there are commands for the rank in the
writeQueue and the bus state is WRITE.
Change-Id: I6103f660776e36c686655e71d92ec7b5b752050a
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
The per rank statistics are periodically updated based on
state transition and refresh events.
Add a method to update these when a dump event occurs to
ensure they reflect accurate values.
Specifically, need to ensure that the low-power state
durations, power, and energy are logged correctly.
Change-Id: Ib642a6668340de8f494a608bb34982e58ba7f1eb
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
Add constraint that all ranks have to be in PWR_IDLE
before signaling drain complete
This will ensure that the banks are all closed and the rank
has exited any low-power states.
On suspend, update the power stats to sync the DRAM power logic
The logic maintains the location of the signalDrainDone
method, which is still triggered from either:
1) Read response event
2) Next request event
This ensures that the drain will complete in the READ bus
state and minimizes the changes required.
Change-Id: If1476e631ea7d5999fe50a0c9379c5967a90e3d1
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
Add local variable to stores commands to be issued.
These commands are in order within a single bank but will be out
of order across banks & ranks.
A new procedure, flushCmdList, sorts commands across banks / ranks,
and flushes the sorted list, up to curTick() to DRAMPower.
This is currently called in refresh, once all previous commands are
guaranteed to have completed. Could be called in other events like
the powerEvent as well.
By only flushing commands up to curTick(), will not get out of sync
when flushed at a periodic stats dump (done in subsequent patch).
Change-Id: I4ac65a52407f64270db1e16a1fb04cfe7f638851
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
Change-Id: I8992ddc1664c3ed4b2d36d8a34e4ce8be113b9de
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
|
|
|
|
|
|
This commit adds missing non-predicated, scalar floating point
instructions. Specifically VRINT* floating point integer rounding
instructions and VSEL* floating point conditional selects.
Change-Id: I23cbd1389f151389ac8beb28a7d18d5f93d000e7
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@arm.com>
|
|
The generic timer needs a pointer to an ArmSystem to wire itself to the
system register handler. This was previously specified as an instance
of System that was later cast to ArmSystem. Make this more robust by
specifying it as an ArmSystem in the Python interface and add a check
to make sure that it is non-NULL.
Change-Id: I989455e666f4ea324df28124edbbadfd094b0d02
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This removes errors when building gem5.fast
|
|
Revamped version of garnet with more optimized single-cycle routers,
more configurability, and cleaner code.
|
|
Only garnet2.0 will be supported henceforth.
|
|
This patch adds port direction names to the links during topology
creation, which can be used for better printed names for the links
or for users to code up their own adaptive routing algorithms.
It also adds support for every router to have an independent latency
value to support heterogeneous topologies with the subsequent
garnet2.0 patch.
|
|
This patch makes the internal links within the network topology
unidirectional, thus allowing any deadlock-free routing algorithms to
be specified from the topology itself using weights.
This patch also renames Mesh.py and MeshDirCorners.py to
Mesh_XY.py and MeshDirCorners_XY.py (Mesh with XY routing).
It also adds a Mesh_westfirst.py and CrossbarGarnet.py topologies.
|
|
networktest is essentially a collection of synthetic traffic patterns
for the network. The protocol name and the tester having the same name
led to multiple python configuration files with the same name, adding
confusion. This patch renames networktest to garnet_synthetic_traffic,
and also adds more synthetic traffic patterns.
|
|
Over the past 6 years, we realized that the protocol is essentially used
to run the garnet network in a standalone manner, and feed standard synthetic
traffic patterns through it.
|
|
Adding details, e.g. rip, rsp etc. to the kvm pagefault exit when in SE mode.
|
|
Instead of scheduling another event, this patch adds a warning in case gdb
is attached multiple times and the first attachement event has not been
processed yet.
|
|
This patch adds a method to the Wavefront class to compute the actual workgroup
size. This can be different from the maximum workgroup size specified when
launching the kernel through the NDRange object. Current solution is still not
optimal, as we are computing these for each wavefront and the dispatcher also
needs to have this information and can't actually call
Wavefront::computeActuallWgSz before the wavefronts are being created. A long
term solution would be to have a Workgroup class that deals with all these
details.
|
|
When loading a checkpoint, it's sometimes desirable to be able to test
whether an entry within a secion exists. This is currently done
automatically in the UNSERIALIZE_OPT_SCALAR macro, but it isn't
possible to do for arrays, containers, or enums. Instead of adding
even more macros, add a helper function (CheckpointIn::entryExists())
that tests for the presence of an entry.
Change-Id: I4b4646b03276b889fd3916efefff3bd552317dbc
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
Fixed AbstractController::queueMemoryWritePartial to specify the
correct size for partial memory writes.
|
|
print number of bytes written as a decimal number, not hex
|
|
Change-Id: If19b9c593b48ded1ea848f2d3710d4369ec8a221
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The drain did not wait until stages were ready again. Therefore, as a
result of messages in the TimeBuffer being drain, the state after the
drain was not consistent and asserts fired in some places when the
draining happened after a stage got blocked, but before the notification
arrived to the previous stages.
Change-Id: Ib50b3b40b7f745b62c1eba2931dec76860824c71
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
|
|
|
|
This patch adds methods to serialize the context of a particular wavefront
to the simulated system memory. Context serialization is used when a wavefront
is preempeted (i.e. context switch).
|
|
|
|
This patch introduces DPRINTFs for reading and writing to and from the vector
register file.
|
|
std::stack has no iterators, therefore the reconvergence stack can't be
iterated without poping elements off. We will be using std::list instead to be
able to iterate for saving and restoring purposes.
|
|
Adding runtime support for determining the memory required by a SIMD engine
when executing a particular wavefront.
|
|
Renaming members of the Wavefront class in accordance with the style guide.
|
|
WFContext struct is currently unused and it has been rendered not useful in
saving and restoring the context of a Wavefront. Wavefront class should be
sufficient for that purpose and the runtime can figure out the memory size
it will need to allocate for a Wavefront through an IOCTL.
|
|
Change-Id: I3e282baeb969b6bb9534813a2f433d68246c0669
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Change-Id: Id2acbc09772be310a0eb9e33295afab07e08a4fa
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This change adds a Trace CPU param to exit simulation early,
i.e. when the first (any one) trace execution is complete. With
this change the user gets a choice to configure exit as either
when the last CPU finishes (default) or first CPU finishes
replay. Configuring an early exit enables simulating and
measuring stats strictly when memory-system resources are being
stressed by all Trace CPUs.
Change-Id: I3998045fdcc5cd343e1ca92d18dd7f7ecdba8f1d
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This change subtracts the time offset present in the trace from
all the event times when nodes and request are sent so that the
replay starts immediately when the simulation starts. This makes
the stats accurate when the time offset in traces is large, for
example when traces are generated in the middle of a workload
execution. It also solves the problem of unnecessary DRAM
refresh events that would keep occuring during the large time
offset before even a single request is replayed into the system.
Change-Id: Ie0898842615def867ffd5c219948386d952af7f7
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This change adds a simple feature to scale the frequency of
the Trace CPU.
The compute delays in the input traces provide timing. This
change adds a freqency multiplier parameter to the Trace CPU
set to 1.0 by default. The compute delay is manipulated to
effectively achieve the frequency at which the nodes become
ready and thus scale the frequency of the Trace CPU.
Change-Id: Iaabbd57806941ad56094fcddbeb38fcee1172431
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
|
|
This patch enables timing accesses for KVM cpu. A new state,
RunningMMIOPending, is added to indicate that there are outstanding timing
requests generated by KVM in the system. KVM's tick() is disabled and the
simulation does not enter into KVM until all outstanding timing requests have
completed. The main motivation for this is to allow KVM CPU to perform MMIO
in Ruby, since Ruby does not support atomic accesses.
|
|
Normal MMAPPED_IPR requests are allowed to execute speculatively under the
assumption that they have no side effects. The special case of m5ops that are
treated like MMAPPED_IPR should not be allowed to execute speculatively, since
they can have side-effects. Adding the STRICT_ORDER flag to these requests
blocks execution until the associated instruction hits the ROB head.
|
|
The quiesce family of magic ops can be simplified by the inclusion of
quiesceTick() and quiesce() functions on ThreadContext. This patch also
gets rid of the FS guards, since suspending a CPU is also a valid
operation for SE mode.
|
|
This patch introduces the DmaCallback helper class, which registers a callback
to fire after a sequence of (potentially non-contiguous) DMA transfers on a
DmaPort completes.
|
