| Age | Commit message (Collapse) | Author |
|---|
|
That abstracts the ISA further from the CPU, getting us a small step
closer to being able to build in more than one ISA at a time.
Change-Id: Ibf7e26a3df411ffe994ac1e11d2a53b656863223
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20831
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Using GicV2 without setting the gem5_extensions parameter in a
config with more than 8 is not allowed to prevent overflow of
the 8-bit mask.
Change-Id: I780c6985e8f44ed780b4f74f9a27805124e23a7b
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19288
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
In addition to the tests, a more detailed explanation of how
"insertBits(..)" functions has been included in its doxygen
documentation. The previous explanation was ambigious and led to
confusion.
Change-Id: I2ae8608733ebaa8f8f726cbb3a2cd8639b69c6b7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21700
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
Nothing is using it, and it's actually not use*able* at the moment
because it doesn't have implementations for all the pure virtual
methods that exist in the BaseTLB class.
Change-Id: I03d47c2e116f354c7247a2fa19a9f33dfe4c5eec
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21841
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
These aren't referred to in the C++, so there's no reason for them to
be parameters. By making them children, they can still be modified,
replaced wholesale, or even replaced by an entirely different object
to, for instance, mask them when they're not needed.
Change-Id: Ic7f144a3cd3d1fca12fec220918aa72af885f61c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21839
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
It will no longer be a PioDevice or a ClockedObject, but will carry
forward the little bits and pieces of those classes that it was using.
Those are a PIO port for memory mapped register accesses, and a clock
domain parameter for setting the apic tick frequency.
This brings the x86 Interrupts class in line with the Interrupts of the
other ISAs so that they can inherit from a standard base class.
Change-Id: I6b25fa21911b39a756e0cf9408c5489a81d6ca56
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20829
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: I586a06c70f4e7331b4a31208ef7831e8473509c5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21699
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
There are cases where the memory system needs to reason about
channel-local addresses. These are currently represented using the
Addr and AddrRange classes. This is not ideal since it doesn't provide
any type safety when working with global addresses and channel-local
addresses. This is particularly problematic when porting existing
components to work in multi-channel configurations.
This changeset introduces the new ChannelAddr and ChannelAddrRange
classes. These classes encapsulate channel-local addresses in a
contiguous address space. These can, for example, be used in a memory
controller to represent a flat address space when calculating timings
or in a sectored cache.
Change-Id: I45d4061ebc8507a10d0a4577b28796dc5ec7a469
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21600
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Now that Message*Port is gone, there are no users of these two memory
commands. They can now be deleted, simplifying the memory system
slightly.
Change-Id: If157dade4a3fb2610756c2ee81dc0c3fac670a26
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20824
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The only reason the TLB pointer is being cast to an ArmISA::TLB is so
that it can call a version of translateFunctional which takes more
arguments, when the standard version of translateFunctional just calls
that underlying function with the same arguments.
Change-Id: I3ffd3a8ecc2dda91ddca77f516e2b2ac7313a227
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21840
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
The record_t typedef isn't all that helpful, and is also not consistent
with gem5 style. The map_t style is more useful but is also not
compliant. This change eliminates the first typedef and replaces the
second with a type called Map.
There are some other small style fixups added in as well, like making
the member variable pc_map pcMap.
Change-Id: I8ffea529004fd6d5b42fdc60250804e2e4987e88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21781
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This was initially added in 2003 and only supported in the simple CPUs.
It's oddly specific since there are no other similar event queues for,
for instance, stores, branches, system calls, etc.
Given that this seems like a historical oddity which is only partially
supported and would be very hard to support on more diverse CPU types
like KVM or fast model which don't generally have hooks for counts of
specific instruction types.
Change-Id: I29209b7ffcf896cf424b71545c9c7546f439e2b9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21780
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This method performs the opposite operation of removeIntlvBits and can
be used to transform a channel-local address to a global PA.
Change-Id: I2fab587d7c094597e52422305775ac7f31efba34
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21599
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
We would otherwise need to add a using namespace std wherever we
use DPRINTFNR.
Change-Id: I30bf9ba474408133abded66141f6dc96dfdba8d6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21821
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: I86c83e8622ae5a88ff802ccb1cb919194c1251ef
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21820
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This code was originally in the ObjectFile class, but not all object
files will become Processes. All Processes will ultimately come from
ObjectFiles though, so it makes more sense to put that class there.
Change-Id: Ie73e4cdecbb51ce53d24cf68911a6cfc0685d771
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21468
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This removes the recvResponse callback from the IntMasterPort, and
makes it easier to handle the default case where we just need to clean
up the Packet.
Change-Id: I8bcbfee0aaf68b12310d773f925c399fc87ea65d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20828
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
This change creates a distinction between object files which hold
executable code, and flat files which don't. The first type of files
have entry points, symbols, etc., while the others are just blobs which
can be shoved into memory. Rather than have those aspects but stub
them out, this change creates a new base class which simply doesn't
have them.
This change also restructures the ELF loader since it's main function
was quite long and doing multiple jobs.
It stops passing the architecture and operating system to the
ObjectFile constructor, since those might not be known at the very top
of the constructor. Instead, those default to Uknown*, and then are
filled in in the constructor body if appropriate. This removes a lot
of plumbing that was hard to actually use in practice.
It also introduces a mechanism to collect generic object file formats
so that they can be tried one by one by the general createObjectFile
function, rather than listing them all there one by one. It's unlikely
that new types of object files will need to be added in a modular way
without being able to modify the core loader code, but it's cleaner to
have that abstraction and modularization like is already there for
process loaders.
Finally, to make it possible to share the code which handles zipped
files for both true object files and also files which will be loaded
into memory but are just blobs, that mechanism is pulled out into a
new class called ImageFileData. It holds a collection of segments
which are set up by the object file and may refer to regions of the
original file, buffers maintained elsewhere, or even nothing to support
bss-es. shared_ptr is used to make it easier to keep track of that
information without having to do so explicitly or worry about deleting
a buffer before everyone was done using it.
Change-Id: I92890266f2ba0a703803cccad675a3ab41f2c4af
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21467
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Change-Id: I2adae2858897e665fd28cfe9de3fdcf95ffc2a2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21779
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
According to the Intel SDM, no instruction following an LFENCE can begin
execution until after the LFENCE has executed. (This is
less strict than an actual serializing instruction, such as CPUID.)
Serializing instructions (per intel SDM Volume 3A Chapter 8.3) ensure
that no future instruction is fetched until after the serializing
instruction is completed.
By contrast, LFENCE (and other memory-ordering instructions) allows
future instructions to have been fetched; it just prohibits them from
being executed.
Change-Id: If89fcb552192326ab69a581f57d71c95cf5d90e7
Signed-off-by: Isaac Richter <isaac.richter@rochester.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/10321
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This patch is carving out a portion of VExpress_GEM5 memory for the
bootloader. Prior to this patch this was only happening
conditionally/dynamically via the setupBootLoader call. With this patch
the region is always present and the setupBootLoader doesn't instantiate
memory, it is only setting up some bootloader parameters.
Change-Id: Iaa5cdf471b14e8faa37353a25631bf7c6fc64afc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21604
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This queue was set up to allow triggering events based on the total
number of instructions executed at the system level, and was added in
a change which added a number of things to support McPAT. No code
checked into gem5 actually schedules an event on that queue, and no
code in McPAT (which seems to have gone dormant) either downloadable
from github or found in ext modify gem5 in a way that makes it use
the instEventQueue.
Also, the KVM CPU does not interact with the instEventQueue correctly.
While it does check the per-thread instruction event queue when
deciding how long to run, it does not check the instEventQueue. It will
poke it to run events when it stops for other reasons, but it may (and
likely will) have run beyond the point where it was supposed to stop.
Since this queue doesn't seem to actually be used for anything, isn't
being used properly in all cases anyway, and adds overhead to all the
CPU models, this change eliminates it.
Change-Id: I0e126df14788c37a6d58ca9e1bb2686b70e60d88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21783
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tiago Mück <tiago.muck@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The devices which host an IntMasterPort are very specific to x86 at the
moment, but the ports don't have to be. This change moves
responsibilities around so that the x86 specific aspects are handled
in the device, and the ports themselves are ISA agnostic.
Change-Id: I50141b66895be7d8f6303605505002ef424af7fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20827
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Change-Id: Icebd0fdec4be86e0f0fd86ef58f52ddbfdf8d714
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21619
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
There is no interrupt response message, and so no need for a function
which would construct one. The other functions which construct the
request can be consolidated since the work being done by each is
incremental. The template parameters can be used to support multiple
types and offsets in a single function, and since that function also
doesn't have to do much work, it makes sense to do everything in one
shot.
Change-Id: I41b202a263a697c5ada6817f3ab2a4728281b894
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20826
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
The unconnected CPU ports/sockets still need to be connected for TLM to
be happy, so this change also adds a terminator module which finds all
unbound sockets, creates pair sockets for them to connect to, binds
everything together, and implements the target interface with a dummy
stub that will complain and crash gem5 if it ever gets called.
This will allow us to use the same GIC model to connect an arbitrary
number of cores, up to the architected limit of 256.
Change-Id: Iaa83fe4f023217dc91a3734b31f764fc4176130e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21500
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Modify second chance replacement policy so that entries are inserted
without a second chance. Previously, the second chance bit was set
to true when a cache line was inserted. So the cache line would gain
its second chance when inserting. This is wrong because the cache
block will only get a second chance when it hits.
Here's a quoted citation for the second chance replacement policy:
"Whenever the algorithm examines a page entry, it extracts the associated
usage bit and enters it into the high-order position of a k-bit shift
register after shifting the contents of the register one bit-position
lower. Then if the shift register is nonzero, the page is retained; if the
shift register is zero, the page is replaced by the new page. In either
case the usage bit for the page is turned off and the circular list
pointer is advanced."
(A Paging Experiment with the Multics System, FJ Corbato, 1968)
Change-Id: I0d07e56aa16c67dd36e0d490c3f457f91e46f320
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20882
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
|
|
The lastTouchTick is set to 0 when instantiate. This will cause the
candidate[0] to get evicted over and over again in MRU replacement
policy. To resolve this, break the search loop whenever it finds a
cold cache line.
Change-Id: I33aa57ebe0efca15986f62c3ae10a146bd2b779f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20881
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
|
|
Most of its functionality has been exported already. This change makes
the two classes which were inheriting IntDevice create an IntMasterPort
themselves.
Change-Id: I73d17cd79cf8252b0e26dd2576f552bf9054adf4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20825
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
A memory image can be described by an object file, but an object file
is more than a memory image. Also, it makes sense to manipulate a
memory image to, for instance, change how it's loaded into memory. That
takes on larger implications (relocations, the entry point, symbols,
etc.) when talking about the whole object file, and also modifies
aspects which may not need to change. For instance if an image needs
to be loaded into memory at addresses different from what's in the
object file, but other things like symbols need to stay unmodified.
Change-Id: Ia360405ffb2c1c48e0cc201ac0a0764357996a54
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21466
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
Add support in Ruby to use all replacement policies in Classic.
Furthermore, if new replacement policies are added to the
Classic system, the Ruby system will recognize new policies
without any other changes in Ruby system. The following list
all the major changes:
* Make Ruby cache entries (AbstractCacheEntry) inherit from
Classic cache entries (ReplaceableEntry). By doing this,
replacement policies can use cache entries from Ruby caches.
AccessPermission and print function are moved from
AbstractEntry to AbstractCacheEntry, so AbstractEntry is no
longer needed.
* DirectoryMemory and all SLICC files are changed to use
AbstractCacheEntry as their cache entry interface. So do the
python files in mem/slicc/ast which check the entry
interface.
* "main='false'" argument is added to the protocol files where
the DirectoryEntry is defined. This change helps
differentiate DirectoryEntry from CacheEntry because they are
both the instances of AbstractCacheEntry now.
* Use BaseReplacementPolicy in Ruby caches instead of
AbstractReplacementPolicy so that Ruby caches will recognize
the replacement policies from Classic.
* Add getLastAccess() and useOccupancy() function to Classic
system so that Ruby caches can use them. Move lastTouchTick
to ReplacementData struct because it's needed by
getLastAccess() to return the correct value.
* Add a 2-dimensional array of ReplacementData in Ruby caches
to store information for different replacement policies. Note
that, unlike Classic caches, where policy information is
stored in cache entries, the policy information needs to be
stored in a new 2-dimensional array. This is due to Ruby
caches deleting the cache entry every time the corresponding
cache line get evicted.
Change-Id: Idff6fdd2102a552c103e9d5f31f779aae052943f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20879
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The interpreter is a separate object file, and while it's convenient to
hide loading it in the code which loads the main object file, it breaks
the conceptual abstraction since you only asked it to load the main
object file.
Also, this makes every object file format reimplement the idea of
loading the interpreter. Admittedly only ELF recognizes and sets up
an interpreter, but other formats conceptually could too.
This does move that limitted hypothetical redundancy out of the object
file formats and moves it into the process objects, but I think
conceptually that's where it belongs. It would also probably be pretty
easy to add a method to the base Process class that would handle
loading an image and also the interpreter image.
This change does not (yet) separate reading symbol tables.
Change-Id: I4a165eac599a9bcd30371a162379e833c4cc89b4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21465
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This is aligning with the fact that dtb autogeneration is already
possible with an ArmSystem.
Change-Id: I72149927ee70d29458f8718a03845bb293c12145
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21602
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This is an old unused platform. We should support VExpress_GEM5 based
platforms only.
Change-Id: If9c29047b2d068992dfbbe0dc268c70b788cce5f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21601
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The ObjectFile class has hardcoded assumptions that there are three
segments, text, bss and data. There are some files which have one
"segment" like raw files, where the entire file's contents are
considered a single segment. There are also ELF files which can have
an arbitrary number of segments, and those segments can hold any
number of sections, including the text, data and/or bss sections.
Removing this assumption frees up some object file formats from having
to twist themselves to fit in that structure, possibly introducing
ambiguities when some segments may fulfill multiple roles.
Change-Id: I976e06a3a90ef852b17a6485e2595b006b2090d5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21463
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This lets us avoid having to have two levels of bridging and twice as
many ports on both the CPU and GIC side. The direct communication ports
can be instantiated and connected using array syntax, where the bridges
require instantiating each bridge individually and wiring them up one
at a time with a lot of boilerplate/duplicate code.
Change-Id: I815ee47bcd19994e46a5220e0c23e89c497d7aa5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21050
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
|
|
refcnt.cc was previously tested in src/unittest/refcnttest.cc. This has
now been translated into a GTest as faithfully to the original as
possible.
Change-Id: I51f7a3d1e0a85b128c4eebd97cfe79b87406dc29
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21499
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
A pointer to it was set up in the MIPS and RISCV system classes, but
nothing ever set that pointer. The class was put in base/loader, but
didn't have anything to do (as far as I can see) with loading anything
it had a loadSegments method, but was not a subclass of ObjectFile.
Change-Id: I4b711a31df20e20ffc306709227f60aa020fca15
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21464
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
ELF is, in my opinion, the most important object file format gem5
currently understands, and in ELF terminolgy the blob of data that
needs to be loaded into memory to a particular location is called a
segment. A section is a software level view of what's in a region
of memory, and a single segment may contain multiple sections which
happen to follow each other in memory.
Change-Id: Ib810c5050723d5a96bd7550515b08ac695fb1b02
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21462
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
|
|
This was only ever read from Alpha, and nothing ever set it.
It defaulted to zero, so this change just propogates that value through
to the Alpha Process class.
Change-Id: I569cf9d61a37322dbd88de1038a2af74c64bbe7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21461
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
If the %p format is used, char * arguments should be printed as the
hex value of their pointer, not as strings. Unfortunately blindly
passing them to an ostream using << will not do that. This change adds
some casting in that case to ensure that they're treated as numbers and
not as strings.
Change-Id: If02bae6d5e468b352266702fcba62b6beddffcbd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21459
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
This makes it easier to wire up CPUs to the interrupt controller, and
makes things more modular.
Change-Id: I8d3ab26e4bb588b8efb198ed145d0f58b7ee04cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21049
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
Those registers are 32-bit instead of 64 in the KVM API.
The Linux kernel 5.2 linux/Documentation/virtual/kvm/api.txt contains:
0x6020 0000 0010 00d4 FPSR 32 fp_regs.fpsr
0x6020 0000 0010 00d5 FPCR 32 fp_regs.fpcr
The register itself is 64-bit in the ARM manual, but the top 32 are
RES0.
This fixes the following error when running ARM KVM early in the
simulation:
panic: KVM: Failed to set register (0x60300000001000d4) value
(errno: 22)
Change-Id: I8fe6e12df4809992173200a42e3ce5414748bdad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21300
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The ELF segment type had been checked by bitwise &-ing it with the
PT_LOAD constant to check if it was loadable. This is incorrect. The
value is a flat integer, with different values selecting different
types of segments.
Change-Id: I644dd985bda4ad2d992557c90ffe8048c0ae6aac
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21460
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
glibc 2.30 introduced the function gettid() in sys/types.h to return the
caller's thread ID. In order to avoid conflicts, the already present
gettid() functions have been renamed to sysGettid(). This fixes a
compilation error with X86 arch.
Change-Id: I76c971465fc4b50e4decde8303185439082b2378
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21379
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The variable *sys in dram_ctrl.cc was only used in an assert() check,
therefore it has been removed to allow building gem5.fast without
errors. A typo in a comment in abstract_mem.hh has also been corrected.
Change-Id: I2663545449ecfdb5a27c3574b79dd42beb4a49c8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21380
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
|
|
When compiling using "scons build/X86/base", "error: 'tx_queue_size'
may be used uninitialized in this function" is received (cc1plus:
all warnings treated as errors). tx_queue_size is now initialized
to zero to avoid this compilation error.
Change-Id: I0e2a4fd9ad6053c4c4124c83da9a7919778bcc52
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21399
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
|
The params pointer is kept by the SimObject and should not be deleted
until gem5 exits. Added a to do to remember this object is leaked.
Change-Id: I46cc23a09e4e9b6bc2fdcd961148324c41820815
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18068
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
|
|
DC ZVA instruction is not classified as a cache maintenance instruction,
and therefore its execution cannot cause this field to be set to 1.
Change-Id: I0f30db1e6fc629dc52293edfb2bac4cf99ee49cc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21306
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
The CM bit in a DataAbort ISS indicates whether the Data Abort came from
a cache maintenance or address translation instruction.
Change-Id: I8888520446550581c8dd0507a8989935db7047be
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21305
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
|
