| Age | Commit message (Collapse) | Author |
|---|
|
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.
In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
|
|
non-cache.
This change fixes the problem for all the cases we actively use. If you want to try
more creative I/O device attachments (E.g. sharing an L2), this won't work. You
would need another level of caching between the I/O device and the cache
(which you actually need anyway with our current code to make sure writes
propagate). This is required so that you can mark the cache in between as
top level and it won't try to send ownership of a block to the I/O device.
Asserts have been added that should catch any issues.
|
|
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
|
|
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
|
|
Previously there was one per bus, which caused some coherence problems
when more than one decided to respond. Now there is just one on
the main memory bus. The default bus responder on all other buses
is now the downstream cache's cpu_side port. Caches no longer need
to do address range filtering; instead, we just have a simple flag
to prevent snoops from propagating to the I/O bus.
|
|
--HG--
extra : convert_revision : 8ba96e21be2f602eed8258d410038dbe998ef176
|
|
--HG--
extra : convert_revision : c5555b00bef1b304a84886188ad2c0dcb4d7c5b9
|
|
set the latency parameter in terms of a latency
add caches to tsunami-simple configs
configs/common/Caches.py:
tests/configs/memtest.py:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
set the latency parameter in terms of a latency
configs/common/FSConfig.py:
give the bridge a default latency too
src/mem/cache/cache_builder.cc:
src/python/m5/objects/BaseCache.py:
remove hit_latency and make latency do the right thing
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
add caches to tsunami-simple configs
--HG--
extra : convert_revision : 37bef7c652e97c8cdb91f471fba62978f89019f1
|
|
directly configured by python. Move stuff from root.(cc|hh) to
core.(cc|hh) since it really belogs there now.
In the process, simplify how ticks are used in the python code.
--HG--
extra : convert_revision : cf82ee1ea20f9343924f30bacc2a38d4edee8df3
|
|
for its MemObject instead of having to have a paramter for the MemObject.
configs/example/fs.py:
configs/example/se.py:
src/cpu/simple/base.cc:
src/cpu/simple/base.hh:
src/cpu/simple/timing.cc:
src/cpu/simple_thread.cc:
src/cpu/simple_thread.hh:
src/cpu/thread_state.cc:
src/cpu/thread_state.hh:
tests/configs/o3-timing-mp.py:
tests/configs/o3-timing.py:
tests/configs/simple-atomic-mp.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing-mp.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
No need for mem parameter any more.
src/cpu/checker/cpu.cc:
Use new constructor for simple thread (no more MemObject parameter).
src/cpu/checker/cpu.hh:
Remove MemObject parameter.
src/cpu/memtest/memtest.hh:
Ports now take in their MemObject owner.
src/cpu/o3/alpha/cpu_builder.cc:
Remove mem parameter.
src/cpu/o3/alpha/cpu_impl.hh:
Remove memory parameter and clean up handling of TranslatingPort.
src/cpu/o3/cpu.cc:
src/cpu/o3/cpu.hh:
src/cpu/o3/fetch.hh:
src/cpu/o3/fetch_impl.hh:
src/cpu/o3/mips/cpu_builder.cc:
src/cpu/o3/mips/cpu_impl.hh:
src/cpu/o3/params.hh:
src/cpu/o3/thread_state.hh:
src/cpu/ozone/cpu.hh:
src/cpu/ozone/cpu_builder.cc:
src/cpu/ozone/cpu_impl.hh:
src/cpu/ozone/front_end.hh:
src/cpu/ozone/front_end_impl.hh:
src/cpu/ozone/lw_lsq.hh:
src/cpu/ozone/lw_lsq_impl.hh:
src/cpu/ozone/simple_params.hh:
src/cpu/ozone/thread_state.hh:
src/cpu/simple/atomic.cc:
Remove memory parameter.
--HG--
extra : convert_revision : 43cb44a33b31320d44b69679dcf646c0380d07d3
|
|
and PhysicalMemory. *No* support for caches or O3CPU.
Note that properly setting cpu_id on all CPUs is now required
for correct operation.
src/arch/SConscript:
src/base/traceflags.py:
src/cpu/base.hh:
src/cpu/simple/atomic.cc:
src/cpu/simple/timing.cc:
src/cpu/simple/timing.hh:
src/mem/physical.cc:
src/mem/physical.hh:
src/mem/request.hh:
src/python/m5/objects/BaseCPU.py:
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
tests/configs/tsunami-simple-atomic-dual.py:
tests/configs/tsunami-simple-atomic.py:
tests/configs/tsunami-simple-timing-dual.py:
tests/configs/tsunami-simple-timing.py:
Implement Alpha LL/SC support for SimpleCPU (Atomic & Timing)
and PhysicalMemory. *No* support for caches or O3CPU.
--HG--
extra : convert_revision : 6ce982d44924cc477e049b9adf359818908e72be
|
|
--HG--
extra : convert_revision : 486283d83786807c72bb4601e4b9613b55d8802c
|
|
configs/common/FSConfig.py:
Add default Machine() param
configs/example/fs.py:
configs/example/se.py:
make it work again
src/python/m5/objects/BaseCPU.py:
Make mem PhysicalMemory so that a Parent.any proxy works well
src/sim/process.cc:
Increase default stack size so we don't get an
'increasing stack' message on 'hello world'
tests/SConscript:
Add full list of current configs.
tests/configs/simple-atomic.py:
tests/configs/simple-timing.py:
don't need SEConfig anymore
tests/quick/00.hello/test.py:
tests/quick/20.eio-short/test.py:
fix
tests/run.py:
move configs to separate dir
--HG--
rename : configs/test/fs.py => configs/example/fs.py
rename : configs/test/test.py => configs/example/se.py
rename : tests/simple-atomic.py => tests/configs/simple-atomic.py
rename : tests/simple-timing.py => tests/configs/simple-timing.py
rename : tests/linux-mpboot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/config.out
rename : tests/linux-mpboot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stderr
rename : tests/linux-mpboot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic-dual/stdout
rename : tests/linux-boot/ref/alpha/atomic/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.ini
rename : tests/linux-boot/ref/alpha/atomic/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/config.out
rename : tests/linux-boot/ref/alpha/atomic/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/console.system.sim_console
rename : tests/linux-boot/ref/alpha/atomic/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/m5stats.txt
rename : tests/linux-boot/ref/alpha/atomic/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stderr
rename : tests/linux-boot/ref/alpha/atomic/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-atomic/stdout
rename : tests/linux-mpboot/ref/alpha/timing/config.ini => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.ini
rename : tests/linux-mpboot/ref/alpha/timing/config.out => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/config.out
rename : tests/linux-mpboot/ref/alpha/timing/console.system.sim_console => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/console.system.sim_console
rename : tests/linux-mpboot/ref/alpha/timing/m5stats.txt => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/m5stats.txt
rename : tests/linux-mpboot/ref/alpha/timing/stderr => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stderr
rename : tests/linux-mpboot/ref/alpha/timing/stdout => tests/quick/10.linux-boot/ref/alpha/linux/tsunami-simple-timing-dual/stdout
rename : tests/test-progs/hello/bin/mips/linux/hello_mips => tests/test-progs/hello/bin/mips/linux/hello
rename : tests/test-progs/hello/bin/sparc/bin => tests/test-progs/hello/bin/sparc/linux/hello
extra : convert_revision : d68ee6d7eefa7ba57370f3fb3c3589f86a6ea6b4
|
