Age | Commit message (Collapse) | Author |
|
This patch changes the class names of the variuos DRAM configurations
to better reflect what memory they are based on. The speed and
interface width is now part of the name, and also the alias that is
used to select them on the command line.
Some minor changes are done to the actual parameters, to better
reflect the named configurations. As a result of these changes the
regressions change slightly and the stats will be bumped in a separate
patch.
|
|
This patch enables selection of the memory controller class through a
mem-type command-line option. Behind the scenes, this option is
treated much like the cpu-type, and a similar framework is used to
resolve the valid options, and translate the short-hand description to
a valid class.
The regression scripts are updated with a hardcoded memory class for
the moment. The best solution going forward is probably to get the
memory out of the makeSystem functions, but Ruby complicates things as
it does not connect the memory controller to the membus.
--HG--
rename : configs/common/CpuConfig.py => configs/common/MemConfig.py
|
|
This patch generalises the address range resolution for the I/O cache
and I/O bridge such that they do not assume a single memory. The patch
involves adding a parameter to the system which is then defined based
on the memories that are to be visible from the I/O subsystem, whether
behind a cache or a bridge.
The change is needed to allow interleaved memory controllers in the
system.
|
|
This patch merely adds a clock other than the default 1 Tick for the
CPUs of both the test system and drive system for the twosys-tsunami
regression.
The CPU frequency of the driver system is choosed to be twice that of
the test system to ensure it is not the bottleneck (although in this
case it mostly serves as a demonstration of a two-system setup),
|
|
This patch removes the NACKing in the bridge, as the split
request/response busses now ensure that protocol deadlocks do not
occur, i.e. the message-dependency chain is broken by always allowing
responses to make progress without being stalled by requests. The
NACKs had limited support in the system with most components ignoring
their use (with a suitable call to panic), and as the NACKs are no
longer needed to avoid protocol deadlocks, the cleanest way is to
simply remove them.
The bridge is the starting point as this is the only place where the
NACKs are created. A follow-up patch will remove the code that deals
with NACKs in the endpoints, e.g. the X86 table walker and DMA
port. Ultimately the type of packet can be complete removed (until
someone sees a need for modelling more complex protocols, which can
now be done in parts of the system since the port and interface is
split).
As a consequence of the NACK removal, the bridge now has to send a
retry to a master if the request or response queue was full on the
first attempt. This change also makes the bridge ports very similar to
QueuedPorts, and a later patch will change the bridge to use these. A
first step in this direction is taken by aligning the name of the
member functions, as done by this patch.
A bit of tidying up has also been done as part of the simplifications.
Surprisingly, this patch has no impact on any of the
regressions. Hence, there was never any NACKs issued. In a follow-up
patch I would suggest changing the size of the bridge buffers set in
FSConfig.py to also test the situation where the bridge fills up.
|
|
This patch adds a creation-time check to the CPU to ensure that the
interrupt controller is created for the cases where it is needed,
i.e. if the CPU is not being switched in later and not a checker CPU.
The patch also adds the "createInterruptController" call to a number
of the regression scripts.
|
|
This patch classifies all ports in Python as either Master or Slave
and enforces a binding of master to slave. Conceptually, a master (such
as a CPU or DMA port) issues requests, and receives responses, and
conversely, a slave (such as a memory or a PIO device) receives
requests and sends back responses. Currently there is no
differentiation between coherent and non-coherent masters and slaves.
The classification as master/slave also involves splitting the dual
role port of the bus into a master and slave port and updating all the
system assembly scripts to use the appropriate port. Similarly, the
interrupt devices have to have their int_port split into a master and
slave port. The intdev and its children have minimal changes to
facilitate the extra port.
Note that this patch does not enforce any port typing in the C++
world, it merely ensures that the Python objects have a notion of the
port roles and are connected in an appropriate manner. This check is
carried when two ports are connected, e.g. bus.master =
memory.port. The following patches will make use of the
classifications and specialise the C++ ports into masters and slaves.
|
|
|
|
This patch makes the bus bridge uni-directional and specialises the
bus ports to be a master port and a slave port. This greatly
simplifies the assumptions on both sides as either port only has to
deal with requests or responses. The following patches introduce the
notion of master and slave ports, and would not be possible without
this split of responsibilities.
In making the bridge unidirectional, the address range mechanism of
the bridge is also changed. For the cases where communication is
taking place both ways, an additional bridge is needed. This causes
issues with the existing mechanism, as the busses cannot determine
when to stop iterating the address updates from the two bridges. To
avoid this issue, and also greatly simplify the specification, the
bridge now has a fixed set of address ranges, specified at creation
time.
|
|
This makes sure that the address ranges requested for caches and uncached ports
don't conflict with each other, and that accesses which are always uncached
(message signaled interrupts for instance) don't waste time passing through
caches.
|
|
Get rid of misc.py and just stick misc things in __init__.py
Move utility functions out of SCons files and into m5.util
Move utility type stuff from m5/__init__.py to m5/util/__init__.py
Remove buildEnv from m5 and allow access only from m5.defines
Rename AddToPath to addToPath while we're moving it to m5.util
Rename read_command to readCommand while we're moving it
Rename compare_versions to compareVersions while we're moving it.
--HG--
rename : src/python/m5/convert.py => src/python/m5/util/convert.py
rename : src/python/m5/smartdict.py => src/python/m5/util/smartdict.py
|
|
it's only maybe 15 min. long.
tests/configs/twosys-tsunami-simple-atomic.py:
don't need this import
--HG--
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.ini
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/config.out
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.drivesys.sim_console => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.drivesys.sim_console
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.testsys.sim_console => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/console.testsys.sim_console
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/m5stats.txt => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/m5stats.txt
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stderr => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stderr
rename : tests/long/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stdout => tests/quick/80.netperf-stream/ref/alpha/linux/twosys-tsunami-simple-atomic/stdout
rename : tests/long/80.netperf-stream/test.py => tests/quick/80.netperf-stream/test.py
extra : convert_revision : 68497b2ef8b21590cb6c636485703e46dc616513
|
|
tests/SConscript:
add a new configuration for two-system tests (atomic simple only)
--HG--
extra : convert_revision : 16c260ab16f38779fe17b1cab18f36d5c7a70846
|