| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
The traffic generator tests currently assume that they are run from
the root of the source directory. This sometimes breaks tests when
they are run using the new test framework.
Change-Id: I6538a7902694c5d2c980295e076ea1c09acc4291
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
|
|
Change-Id: I64c69fde8657c273adea69122877c5348a4f867a
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
Limit the test configs to Ruby-only configs when testing a Ruby target
that isn't MI_example. This avoids re-running configs that has already
been tested by the generic (non-Ruby) ISA target. This behavior was
the expected behavior prior to switching to the new test framework.
Change-Id: I3f138dbf9c7071ce862d1073aaec57c59afbc921
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
|
|
Rewrite the SCons script responsible for launching tests to use the
new test framework. The biggest visible change after this changeset is
that SCons no longer produces a "status" file in test build
directories. Instead, it creates a status.pickle file. That file can
be inspected using the new tests.py script. Another visible change is
that timed out tests are now reported as failed rather than a using a
separate summary message.
Since the pickle file will remain in the build directory after running
tests, it's now possible to convert the test results into other
formats. For example:
./tests/tests.py show --format junit -o junit.xml \
`find build/ -name status.pickle`
To better facilitate running outside of scons, there is now a set of
targets that generate test listings that can be used by the test
script. There are currently three targets, quick.list, long.list, and
all.list. For example:
scons build/ARM/tests/opt/all.list
for F in `cat build/ARM/tests/opt/all.list`; do
./tests/tests.py run build/ARM/gem5.opt $F
done
Change-Id: I2c0f8ca0080d7af737362e198eda4cb3a72e6c36
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
ClassicTest was incorrectly ignoring stats.txt when updating reference
statistics. This was caused by ignore rules being applied too
aggressively when listing reference files. This changeset splits the
ignore rules into two different lists: 1) diff_ignore_files that lists
the files that shouldn't be diff:ed using the normal diff tool, and 2)
ref_ignore_files which lists files that should be ignored by the test
system.
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
--HG--
extra : source : 2323557eb4f4866fa1ea1575a9f5969e0022adc1
|
|
Disable the default snoop filter in the SystemXBar so that the
typical membus does not have a snoop filter by default. Instead,
add the snoop filter only when there are caches added to the system
(with the caches / l2cache options).
The underlying problem is that the snoop filter grows without
bounds (for now) if there are no caches to tell it that lines have
been evicted. This causes slow regression runs for all the atomic
regressions. This patch fixes this behaviour.
--HG--
extra : source : f97c20511828209757440839ed48d741d02d428f
|
|
Implement gem5's test infrastructure as a Python module and a run
script that can be used without scons. The new implementation has
several features that were lacking from the previous test
infrastructure such as support for multiple output formats, automatic
runtime tracking, and better support for being run in a cluster
environment.
Tests consist of one or more steps (TestUnit). Units are run in two
stages, the first a run stage and then a verify stage. Units in the
verify stage are automatically skipped if any unit run stage wasn't
run. The library currently contains TestUnit implementations that run
gem5, diff stat files, and diff output files.
Existing tests are implemented by the ClassicTest class and "just
work". New tests can that don't rely on the old "run gem5 once and
diff output" strategy can be implemented by subclassing the Test base
class or ClassicTest.
Test results can be output in multiple formats. The module currently
supports JUnit, text (short and verbose), and Python's pickle
format. JUnit output allows CI systems to automatically get more
information about test failures. The pickled output contains all state
necessary to reconstruct a tests results object and is mainly intended
for the build system and CI systems.
Since many JUnit parsers parsers assume that test suite names look
like Java package names. We currently output path-like names with
slashes separating components. Test names are translated according to
these rules:
* '.' -> '-"
* '/' -> '.'
The test tool, tests.py, supports the following features:
* Test listing. Example: ./tests.py list arm/quick
* Running tests. Example:
./tests.py run -o output.pickle --format pickle \
../build/ARM/gem5.opt \
quick/se/00.hello/arm/linux/simple-timing
* Displaying pickled results. Example:
./tests.py show --format summary *.pickle
Change-Id: I527164bd791237aacfc65e7d7c0b67b695c5d17c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Joel Hestness <jthestness@gmail.com>
|
|
The learning gem5 scripts currently assumes that the current working
directory is the root of gem5's source tree. This isn't necessarily
the case when running the tests using gem5's new test runner.
Change-Id: Ief569bbe77b1b3e2b0fb0e6c575fb0705bbba9b3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
|
|
Complaints about changes in EIO tests were due to reference files
that still have removed cache stats from cset 11454:e55afadc4e19.
|
|
Remove test reference files that are not generated any more:
* chair.cook.ppm: This file should be generated by eon and not
mcf, so it shouldn't be included as an output from mcf.
* system.pc.terminal: The terminal device has been renamed so this
file is no longer generated.
Change-Id: I3962efe1ff25479ca276115f7564eccb5fac8cf9
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
|
|
This patch adds a simple regression that calls the existing
memcheck.py script.
--HG--
rename : tests/configs/learning-gem5-p1-simple.py => tests/configs/memcheck.py
rename : tests/quick/se/70.tgen/test.py => tests/quick/se/51.memcheck/test.py
|
|
|
|
Removed unused stats, now counting WriteLineReq, and changed how
uncacheable writes are handled while responses are outstanding.
|
|
Small changes to the branch predictor and BTB caused stats changes
throughout.
|
|
|
|
Additional auxv entries leads to more instructions in start-up
while walking the list, along with different cache conflicts
wrt stack entries.
|
|
|
|
SE O3 runs see an additional reg read per mmap() call.
|
|
Update stats to match current behaviour. As a result of the earlier
conflict check we are seeing a few prefetch requests being ignored
before being sent as upward snoops.
|
|
|
|
Output changed way back in this cset:
changeset: 11345:b6a66a90e0a1
user: John Kalamatianos <john.kalamatianos@amd.com>
summary: gpu: fix bugs with MemFence, Flat Instrs and Resource utilization
|
|
Writes to locked memory addresses (LLSC) did not wake up the locking
CPU. This can lead to deadlocks on multi-core runs. In AtomicSimpleCPU,
recvAtomicSnoop was checking if the incoming packet was an invalidation
(isInvalidate) and only then handled a locked snoop. But, writes are
seen instead of invalidates when running without caches (fast-forward
configurations). As as simple fix, now handleLockedSnoop is also called
even if the incoming snoop packet are from writes.
|
|
|
|
Bug fix for check on protobuf file frequency being different than
global frequency.
The ASCII encoder script is also fixed, and the example trace used in
the regressions is updated.
|
|
|
|
Result of running 'hg m5style --skip-all --fix-control -a'.
|
|
Result of running 'hg m5style --skip-all --fix-white -a'.
|
|
|
|
|
|
|
|
|
|
The fs/80.solaris-boot/sparc/solaris/t1000-simple-atomic test was
broken for so long that, now that it's working again, the stats
output is out of date. This changeset updates the outputs, on
the assumption that the stats changes are all valid differences
due to other changes made while it was broken.
|
|
A couple of the long regressions have been showing as CHANGED
since 11244:a2af58a06c4e despite the updates in 11245:1c5102c0a7a9.
The x86 regression looks like it was just missed, but it's not clear
why the ARM one is giving different results (perhaps a non-determinism
between zizzer and wherever the updated results were run?).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 01.hello-2T-smt test case for the O3 CPU didn't correctly setup
the number of threads before creating interrupt controllers, which
confused the constructor in BaseCPU. This changeset adds SMT support
to the test configuration infrastructure.
--HG--
rename : tests/configs/o3-timing.py => tests/configs/o3-timing-mt.py
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/config.ini => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/config.ini
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/simerr => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/simerr
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/simout => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/simout
rename : tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing/stats.txt => tests/quick/se/01.hello-2T-smt/ref/alpha/linux/o3-timing-mt/stats.txt
|
|
|
