path: root/dev/tsunami_uart.cc

/* $Id$ */

/* @file
 * Tsunami UART
 */

/*
 * Copyright (C) 1998 by the Board of Trustees
 *    of Leland Stanford Junior University.
 * Copyright (C) 1998 Digital Equipment Corporation
 *
 * This file is part of the SimOS distribution.
 * See LICENSE file for terms of the license.
 *
 */

#include <string>
#include <vector>

#include "base/inifile.hh"
#include "base/str.hh"	// for to_number
#include "base/trace.hh"
#include "dev/console.hh"
#include "dev/tsunami_uart.hh"
#include "mem/bus/bus.hh"
#include "mem/bus/pio_interface.hh"
#include "mem/bus/pio_interface_impl.hh"
#include "mem/functional_mem/memory_control.hh"
#include "sim/builder.hh"
#include "targetarch/ev5.hh"

using namespace std;

#define CONS_INT_TX   0x01  // interrupt enable / state bits
#define CONS_INT_RX   0x02


TsunamiUart::IntrEvent::IntrEvent(TsunamiUart *u)
    : Event(&mainEventQueue), uart(u)
{
    DPRINTF(TsunamiUart, "UART Interrupt Event Initilizing\n");
}

const char *
TsunamiUart::IntrEvent::description()
{
    return "tsunami uart interrupt delay event";
}

void
TsunamiUart::IntrEvent::process()
{
    if (UART_IER_THRI & uart->IER) {
       DPRINTF(TsunamiUart, "UART InterEvent, interrupting\n");
       uart->cons->raiseInt(CONS_INT_TX);
    }
    else
       DPRINTF(TsunamiUart, "UART InterEvent, not interrupting\n");

}

void
TsunamiUart::IntrEvent::scheduleIntr()
{
    DPRINTF(TsunamiUart, "Scheduling IER interrupt\n");
    if (!scheduled())
        schedule(curTick + 300);
    else
        reschedule(curTick + 300);
}



TsunamiUart::TsunamiUart(const string &name, SimConsole *c,
                         MemoryController *mmu, Addr a,
                         HierParams *hier, Bus *bus)
    : PioDevice(name), addr(a), cons(c), status_store(0), valid_char(false),
      intrEvent(this)
{
    mmu->add_child(this, Range<Addr>(addr, addr + size));

    if (bus) {
        pioInterface = newPioInterface(name, hier, bus, this,
                                      &TsunamiUart::cacheAccess);
        pioInterface->addAddrRange(addr, addr + size - 1);
    }

    IER = 0;
}

Fault
TsunamiUart::read(MemReqPtr &req, uint8_t *data)
{
    Addr daddr = req->paddr - (addr & PA_IMPL_MASK);
    DPRINTF(TsunamiUart, " read register %#x\n", daddr);

    switch (req->size) {
      case sizeof(uint64_t):
        *(uint64_t *)data = 0;
        break;
      case sizeof(uint32_t):
        *(uint32_t *)data = 0;
        break;
      case sizeof(uint16_t):
        *(uint16_t *)data = 0;
        break;
      case sizeof(uint8_t):
        *(uint8_t *)data = 0;
        break;
    }


    switch(daddr) {
      case 0x5: // Status Register
      {
            int status = cons->intStatus();
            if (!valid_char) {
            valid_char = cons->in(next_char);
                if (!valid_char)
                    status &= ~CONS_INT_RX;
            } else {
            status |= CONS_INT_RX;
            }

            if (status_store == 3) {
                // RR3 stuff? Don't really understand it, btw
                status_store = 0;
                if (status & CONS_INT_TX) {
                    *data = (1 << 4);
                    return No_Fault;
                } else if (status & CONS_INT_RX) {
                    *data = (1 << 5);
                    return No_Fault;
                } else {
                    DPRINTF(TsunamiUart, "spurious read\n");
                    return No_Fault;
                }
            } else {
                int reg = (1 << 2) | (1 << 5) | (1 << 6);
                if (status & CONS_INT_RX)
                    reg |= (1 << 0);
            *data = reg;
            return No_Fault;
            }
            break;
      }

      case 0x0: // Data register (RX)
        DPRINTF(TsunamiUart, "read data register \'%c\' %#02x\n",
                        isprint(next_char) ? next_char : ' ', next_char);

        *data = next_char;
        valid_char = false;
        return No_Fault;

      case 0x1: // Interrupt Enable Register
        // This is the lovely way linux checks there is actually a serial
        // port at the desired address
        if (IER == 0)
            *data = 0;
        else if (IER == 0x0F)
            *data = 0x0F;
        else
            *data = 0;
        return No_Fault;
      case 0x2:
        // High two bits need to be clear for an 8250 (simple) serial port
        // Low bit of IIR is 0 for a pending interrupt, 1 otherwise.
        int status = cons->intStatus();
        status = (status & 0x1) | (status >> 1);
        *data = (~status) & 0x1 ;
        return No_Fault;
    }
    *data = 0;
   // panic("%s: read daddr=%#x type=read *data=%#x\n", name(), daddr, *data);

    return No_Fault;
}

Fault
TsunamiUart::write(MemReqPtr &req, const uint8_t *data)
{
    Addr daddr = req->paddr - (addr & PA_IMPL_MASK);

    DPRINTF(TsunamiUart, " write register %#x value %#x\n", daddr, *(uint8_t*)data);

    switch (daddr) {
      case 0x3:
        status_store = *data;
        switch (*data) {
                case 0x03: // going to read RR3
                return No_Fault;

                case 0x28: // Ack of TX
                {
                        if ((cons->intStatus() & CONS_INT_TX) == 0)
                            panic("Ack of transmit, though there was no interrupt");

                        cons->clearInt(CONS_INT_TX);
                        return No_Fault;
                }

        case 0x00:
        case 0x01:
        case 0x12:
        // going to write data???
        return No_Fault;

        default:
            DPRINTF(TsunamiUart, "writing status register %#x \n",
                    *(uint8_t *)data);
            return No_Fault;
        }

      case 0x0: // Data register (TX)
        char ourchar;
        ourchar = *(uint64_t *)data;
        if ((isprint(ourchar) || iscntrl(ourchar)) && (ourchar != 0x0C))
                cons->out(ourchar);
        cons->clearInt(CONS_INT_TX);
        intrEvent.scheduleIntr();
            return No_Fault;
        break;
      case 0x1: // IER
        IER = *(uint8_t*)data;
        DPRINTF(TsunamiUart, "writing to IER [%#x]\n", IER);
        if (UART_IER_THRI & IER)
            cons->raiseInt(CONS_INT_TX);
        else {
            cons->clearInt(CONS_INT_TX);
            if (intrEvent.scheduled())
                intrEvent.deschedule();
        }
        return No_Fault;
        break;
      case 0x4: // MCR
        DPRINTF(TsunamiUart, "writing to MCR %#x\n", *(uint8_t*)data);
        return No_Fault;

    }

    return No_Fault;
}

Tick
TsunamiUart::cacheAccess(MemReqPtr &req)
{
    return curTick + 1000;
}

void
TsunamiUart::serialize(ostream &os)
{
    SERIALIZE_SCALAR(status_store);
    SERIALIZE_SCALAR(next_char);
    SERIALIZE_SCALAR(valid_char);
    SERIALIZE_SCALAR(IER);
    Tick intrwhen;
    if (intrEvent.scheduled())
        intrwhen = intrEvent.when();
    else
        intrwhen = 0;
    SERIALIZE_SCALAR(intrwhen);


}

void
TsunamiUart::unserialize(Checkpoint *cp, const std::string &section)
{
    UNSERIALIZE_SCALAR(status_store);
    UNSERIALIZE_SCALAR(next_char);
    UNSERIALIZE_SCALAR(valid_char);
    UNSERIALIZE_SCALAR(IER);
    Tick intrwhen;
    UNSERIALIZE_SCALAR(intrwhen);
    if (intrwhen != 0)
        intrEvent.schedule(intrwhen);

}

BEGIN_DECLARE_SIM_OBJECT_PARAMS(TsunamiUart)

    SimObjectParam<SimConsole *> console;
    SimObjectParam<MemoryController *> mmu;
    Param<Addr> addr;
    SimObjectParam<Bus*> io_bus;
    SimObjectParam<HierParams *> hier;


END_DECLARE_SIM_OBJECT_PARAMS(TsunamiUart)

BEGIN_INIT_SIM_OBJECT_PARAMS(TsunamiUart)

    INIT_PARAM(console, "The console"),
    INIT_PARAM(mmu, "Memory Controller"),
    INIT_PARAM(addr, "Device Address"),
    INIT_PARAM_DFLT(io_bus, "The IO Bus to attach to", NULL),
    INIT_PARAM_DFLT(hier, "Hierarchy global variables", &defaultHierParams)

END_INIT_SIM_OBJECT_PARAMS(TsunamiUart)

CREATE_SIM_OBJECT(TsunamiUart)
{
    return new TsunamiUart(getInstanceName(), console, mmu, addr, hier, io_bus);
}

REGISTER_SIM_OBJECT("TsunamiUart", TsunamiUart)