path: root/src/dev/pcidev.cc

/*
 * Copyright (c) 2004-2005 The Regents of The University of Michigan
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Ali Saidi
 *          Andrew Schultz
 *          Miguel Serrano
 */

/* @file
 * A single PCI device configuration space entry.
 */

#include <list>
#include <string>
#include <vector>

#include "base/inifile.hh"
#include "base/misc.hh"
#include "base/str.hh"	// for to_number
#include "base/trace.hh"
#include "dev/pciconfigall.hh"
#include "dev/pcidev.hh"
#include "dev/tsunamireg.h"
#include "mem/packet.hh"
#include "sim/builder.hh"
#include "sim/byteswap.hh"
#include "sim/param.hh"
#include "sim/root.hh"

using namespace std;

PciDev::PciDev(Params *p)
    : DmaDevice(p), plat(p->platform), configData(p->configData),
      pioDelay(p->pio_delay)
{
    // copy the config data from the PciConfigData object
    if (configData) {
        memcpy(config.data, configData->config.data, sizeof(config.data));
        memcpy(BARSize, configData->BARSize, sizeof(BARSize));
        memcpy(BARAddrs, configData->BARAddrs, sizeof(BARAddrs));
    } else
        panic("NULL pointer to configuration data");

    // Setup pointer in config space to point to this entry
    if (p->configSpace->deviceExists(p->deviceNum, p->functionNum))
        panic("Two PCI devices occuping same dev: %#x func: %#x",
              p->deviceNum, p->functionNum);
    else
        p->configSpace->registerDevice(p->deviceNum, p->functionNum, this);
}

void
PciDev::readConfig(int offset, uint8_t *data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    *data = config.data[offset];

    DPRINTF(PCIDEV,
            "read device: %#x function: %#x register: %#x 1 bytes: data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, *data);
}

void
PciDev::addressRanges(AddrRangeList &range_list)
{
    int x = 0;
    range_list.clear();
    for (x = 0; x < 6; x++)
        if (BARAddrs[x] != 0)
            range_list.push_back(RangeSize(BARAddrs[x],BARSize[x]));
}

void
PciDev::readConfig(int offset, uint16_t *data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    *data = *(uint16_t*)&config.data[offset];

    DPRINTF(PCIDEV,
            "read device: %#x function: %#x register: %#x 2 bytes: data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, *data);
}

void
PciDev::readConfig(int offset, uint32_t *data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    *data = *(uint32_t*)&config.data[offset];

    DPRINTF(PCIDEV,
            "read device: %#x function: %#x register: %#x 4 bytes: data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, *data);
}


void
PciDev::writeConfig(int offset,  const uint8_t data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    DPRINTF(PCIDEV,
            "write device: %#x function: %#x reg: %#x size: 1 data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, data);

    switch (offset) {
      case PCI0_INTERRUPT_LINE:
        config.interruptLine = data;
      case PCI_CACHE_LINE_SIZE:
        config.cacheLineSize = data;
      case PCI_LATENCY_TIMER:
        config.latencyTimer = data;
        break;
      /* Do nothing for these read-only registers */
      case PCI0_INTERRUPT_PIN:
      case PCI0_MINIMUM_GRANT:
      case PCI0_MAXIMUM_LATENCY:
      case PCI_CLASS_CODE:
      case PCI_REVISION_ID:
        break;
      default:
        panic("writing to a read only register");
    }
}

void
PciDev::writeConfig(int offset, const uint16_t data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    DPRINTF(PCIDEV,
            "write device: %#x function: %#x reg: %#x size: 2 data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, data);

    switch (offset) {
      case PCI_COMMAND:
        config.command = data;
      case PCI_STATUS:
        config.status = data;
      case PCI_CACHE_LINE_SIZE:
        config.cacheLineSize = data;
        break;
      default:
        panic("writing to a read only register");
    }
}


void
PciDev::writeConfig(int offset, const uint32_t data)
{
    if (offset >= PCI_DEVICE_SPECIFIC)
        panic("Device specific PCI config space not implemented!\n");

    DPRINTF(PCIDEV,
            "write device: %#x function: %#x reg: %#x size: 4 data: %#x\n",
            params()->deviceNum, params()->functionNum, offset, data);

    switch (offset) {
      case PCI0_BASE_ADDR0:
      case PCI0_BASE_ADDR1:
      case PCI0_BASE_ADDR2:
      case PCI0_BASE_ADDR3:
      case PCI0_BASE_ADDR4:
      case PCI0_BASE_ADDR5:

        uint32_t barnum, bar_mask;
        Addr base_addr, base_size, space_base;

        barnum = BAR_NUMBER(offset);

        if (BAR_IO_SPACE(letoh(config.baseAddr[barnum]))) {
            bar_mask = BAR_IO_MASK;
            space_base = TSUNAMI_PCI0_IO;
        } else {
            bar_mask = BAR_MEM_MASK;
            space_base = TSUNAMI_PCI0_MEMORY;
        }

        // Writing 0xffffffff to a BAR tells the card to set the
        // value of the bar to size of memory it needs
        if (letoh(data) == 0xffffffff) {
            // This is I/O Space, bottom two bits are read only

            config.baseAddr[barnum] = letoh(
                    (~(BARSize[barnum] - 1) & ~bar_mask) |
                    (letoh(config.baseAddr[barnum]) & bar_mask));
        } else {
            config.baseAddr[barnum] = letoh(
                (letoh(data) & ~bar_mask) |
                (letoh(config.baseAddr[barnum]) & bar_mask));

            if (letoh(config.baseAddr[barnum]) & ~bar_mask) {
                base_addr = (letoh(data) & ~bar_mask) + space_base;
                base_size = BARSize[barnum];
                BARAddrs[barnum] = base_addr;

            pioPort->sendStatusChange(Port::RangeChange);
            }
        }
        break;

      case PCI0_ROM_BASE_ADDR:
        if (letoh(data) == 0xfffffffe)
            config.expansionROM = htole((uint32_t)0xffffffff);
        else
            config.expansionROM = data;
        break;

      case PCI_COMMAND:
        // This could also clear some of the error bits in the Status
        // register. However they should never get set, so lets ignore
        // it for now
        config.command = data;
        break;

      default:
        DPRINTF(PCIDEV, "Writing to a read only register");
    }
}

void
PciDev::serialize(ostream &os)
{
    SERIALIZE_ARRAY(BARSize, sizeof(BARSize) / sizeof(BARSize[0]));
    SERIALIZE_ARRAY(BARAddrs, sizeof(BARAddrs) / sizeof(BARAddrs[0]));
    SERIALIZE_ARRAY(config.data, sizeof(config.data) / sizeof(config.data[0]));
}

void
PciDev::unserialize(Checkpoint *cp, const std::string &section)
{
    UNSERIALIZE_ARRAY(BARSize, sizeof(BARSize) / sizeof(BARSize[0]));
    UNSERIALIZE_ARRAY(BARAddrs, sizeof(BARAddrs) / sizeof(BARAddrs[0]));
    UNSERIALIZE_ARRAY(config.data,
                      sizeof(config.data) / sizeof(config.data[0]));
}

#ifndef DOXYGEN_SHOULD_SKIP_THIS

BEGIN_DECLARE_SIM_OBJECT_PARAMS(PciConfigData)

    Param<uint16_t> VendorID;
    Param<uint16_t> DeviceID;
    Param<uint16_t> Command;
    Param<uint16_t> Status;
    Param<uint8_t> Revision;
    Param<uint8_t> ProgIF;
    Param<uint8_t> SubClassCode;
    Param<uint8_t> ClassCode;
    Param<uint8_t> CacheLineSize;
    Param<uint8_t> LatencyTimer;
    Param<uint8_t> HeaderType;
    Param<uint8_t> BIST;
    Param<uint32_t> BAR0;
    Param<uint32_t> BAR1;
    Param<uint32_t> BAR2;
    Param<uint32_t> BAR3;
    Param<uint32_t> BAR4;
    Param<uint32_t> BAR5;
    Param<uint32_t> CardbusCIS;
    Param<uint16_t> SubsystemVendorID;
    Param<uint16_t> SubsystemID;
    Param<uint32_t> ExpansionROM;
    Param<uint8_t> InterruptLine;
    Param<uint8_t> InterruptPin;
    Param<uint8_t> MinimumGrant;
    Param<uint8_t> MaximumLatency;
    Param<uint32_t> BAR0Size;
    Param<uint32_t> BAR1Size;
    Param<uint32_t> BAR2Size;
    Param<uint32_t> BAR3Size;
    Param<uint32_t> BAR4Size;
    Param<uint32_t> BAR5Size;

END_DECLARE_SIM_OBJECT_PARAMS(PciConfigData)

BEGIN_INIT_SIM_OBJECT_PARAMS(PciConfigData)

    INIT_PARAM(VendorID, "Vendor ID"),
    INIT_PARAM(DeviceID, "Device ID"),
    INIT_PARAM_DFLT(Command, "Command Register", 0x00),
    INIT_PARAM_DFLT(Status, "Status Register", 0x00),
    INIT_PARAM_DFLT(Revision, "Device Revision", 0x00),
    INIT_PARAM_DFLT(ProgIF, "Programming Interface", 0x00),
    INIT_PARAM(SubClassCode, "Sub-Class Code"),
    INIT_PARAM(ClassCode, "Class Code"),
    INIT_PARAM_DFLT(CacheLineSize, "System Cacheline Size", 0x00),
    INIT_PARAM_DFLT(LatencyTimer, "PCI Latency Timer", 0x00),
    INIT_PARAM_DFLT(HeaderType, "PCI Header Type", 0x00),
    INIT_PARAM_DFLT(BIST, "Built In Self Test", 0x00),
    INIT_PARAM_DFLT(BAR0, "Base Address Register 0", 0x00),
    INIT_PARAM_DFLT(BAR1, "Base Address Register 1", 0x00),
    INIT_PARAM_DFLT(BAR2, "Base Address Register 2", 0x00),
    INIT_PARAM_DFLT(BAR3, "Base Address Register 3", 0x00),
    INIT_PARAM_DFLT(BAR4, "Base Address Register 4", 0x00),
    INIT_PARAM_DFLT(BAR5, "Base Address Register 5", 0x00),
    INIT_PARAM_DFLT(CardbusCIS, "Cardbus Card Information Structure", 0x00),
    INIT_PARAM_DFLT(SubsystemVendorID, "Subsystem Vendor ID", 0x00),
    INIT_PARAM_DFLT(SubsystemID, "Subsystem ID", 0x00),
    INIT_PARAM_DFLT(ExpansionROM, "Expansion ROM Base Address Register", 0x00),
    INIT_PARAM(InterruptLine, "Interrupt Line Register"),
    INIT_PARAM(InterruptPin, "Interrupt Pin Register"),
    INIT_PARAM_DFLT(MinimumGrant, "Minimum Grant", 0x00),
    INIT_PARAM_DFLT(MaximumLatency, "Maximum Latency", 0x00),
    INIT_PARAM_DFLT(BAR0Size, "Base Address Register 0 Size", 0x00),
    INIT_PARAM_DFLT(BAR1Size, "Base Address Register 1 Size", 0x00),
    INIT_PARAM_DFLT(BAR2Size, "Base Address Register 2 Size", 0x00),
    INIT_PARAM_DFLT(BAR3Size, "Base Address Register 3 Size", 0x00),
    INIT_PARAM_DFLT(BAR4Size, "Base Address Register 4 Size", 0x00),
    INIT_PARAM_DFLT(BAR5Size, "Base Address Register 5 Size", 0x00)

END_INIT_SIM_OBJECT_PARAMS(PciConfigData)

CREATE_SIM_OBJECT(PciConfigData)
{
    PciConfigData *data = new PciConfigData(getInstanceName());

    data->config.vendor = htole(VendorID);
    data->config.device = htole(DeviceID);
    data->config.command = htole(Command);
    data->config.status = htole(Status);
    data->config.revision = htole(Revision);
    data->config.progIF = htole(ProgIF);
    data->config.subClassCode = htole(SubClassCode);
    data->config.classCode = htole(ClassCode);
    data->config.cacheLineSize = htole(CacheLineSize);
    data->config.latencyTimer = htole(LatencyTimer);
    data->config.headerType = htole(HeaderType);
    data->config.bist = htole(BIST);

    data->config.baseAddr0 = htole(BAR0);
    data->config.baseAddr1 = htole(BAR1);
    data->config.baseAddr2 = htole(BAR2);
    data->config.baseAddr3 = htole(BAR3);
    data->config.baseAddr4 = htole(BAR4);
    data->config.baseAddr5 = htole(BAR5);
    data->config.cardbusCIS = htole(CardbusCIS);
    data->config.subsystemVendorID = htole(SubsystemVendorID);
    data->config.subsystemID = htole(SubsystemVendorID);
    data->config.expansionROM = htole(ExpansionROM);
    data->config.interruptLine = htole(InterruptLine);
    data->config.interruptPin = htole(InterruptPin);
    data->config.minimumGrant = htole(MinimumGrant);
    data->config.maximumLatency = htole(MaximumLatency);

    data->BARSize[0] = BAR0Size;
    data->BARSize[1] = BAR1Size;
    data->BARSize[2] = BAR2Size;
    data->BARSize[3] = BAR3Size;
    data->BARSize[4] = BAR4Size;
    data->BARSize[5] = BAR5Size;

    return data;
}

REGISTER_SIM_OBJECT("PciConfigData", PciConfigData)

#endif // DOXYGEN_SHOULD_SKIP_THIS