path: root/system/alpha/palcode/platform_m5.s

// build_fixed_image: not sure what means
// real_mm to be replaced during rewrite
// remove_save_state  remove_restore_state can be remooved to save space ??


#define egore 0
#define acore 0
#define beh_model 0
#define ev5_p2 1
#define ev5_p1 0
#define ldvpte_bug_fix 1
#define spe_fix 0
#define osf_chm_fix  0
#define build_fixed_image 0
#define enable_p4_fixups 0
#define osf_svmin 1
#define enable_physical_console 0
#define fill_err_hack 0
#define icflush_on_tbix 0
#define max_cpuid 1
#define perfmon_debug 0
#define rax_mode 0

#define hw_rei_spe hw_rei
	
#include "ev5_defs.h"
#include "ev5_impure.h"
#include "ev5_alpha_defs.h"
#include "ev5_paldef.h"
#include "ev5_osfalpha_defs.h"
#include "fromHudsonMacros.h"
#include "fromHudsonOsf.h"
#include "dc21164FromGasSources.h"
#include "cserve.h"
#include "tlaserreg.h"
//#include "simos.h"

        
#define ldlp ldl_p
#define ldqp ldq_p

#define stlp stl_p        
#define stqp stq_p
#define stqpc stqp
 
#ifdef SIMOS               
#define ldqpl ldq_p
#define sdqpl sdq_p
#else
<--bomb>
#endif            
                   
#define pt_entInt pt_entint
#define pt_entArith pt_entarith
#define mchk_size ((mchk_cpu_base + 7  + 8) &0xfff8)
#define mchk_flag CNS_Q_FLAG
#define mchk_sys_base 56
#define mchk_cpu_base (CNS_Q_LD_LOCK + 8)
#define mchk_offsets CNS_Q_EXC_ADDR
#define mchk_mchk_code 8
#define mchk_ic_perr_stat CNS_Q_ICPERR_STAT
#define mchk_dc_perr_stat CNS_Q_DCPERR_STAT
#define mchk_sc_addr CNS_Q_SC_ADDR
#define mchk_sc_stat CNS_Q_SC_STAT
#define mchk_ei_addr CNS_Q_EI_ADDR
#define mchk_bc_tag_addr CNS_Q_BC_TAG_ADDR
#define mchk_fill_syn CNS_Q_FILL_SYN
#define mchk_ei_stat CNS_Q_EI_STAT
#define mchk_exc_addr CNS_Q_EXC_ADDR
#define mchk_ld_lock CNS_Q_LD_LOCK
#define osfpcb_q_Ksp pcb_q_ksp
#define pal_impure_common_size ((0x200 + 7) & 0xfff8)

#define ALIGN_BLOCK \
	.align 5

#define ALIGN_BRANCH \
	.align 3

#define EXPORT(_x) \
        .align 5;	\
        .globl _x;	\
_x:     
                
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
// XXX the following is 'made up'
// XXX bugnion
                
// XXX bugnion not sure how to align 'quad'        
#define ALIGN_QUAD \
        .align  3

#define ALIGN_128 \
        .align  7
             
                   
#define GET_IMPURE(_r) mfpr _r,pt_impure
#define GET_ADDR(_r1,_off,_r2)  lda _r1,_off(_r2)
                
                
#define BIT(_x) (1<<(_x))

                                        
// XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
// XXX back to original code
                
// .sbttl	"System specific code - beh model version"  

//
// Entry points
//	SYS$CFLUSH - Cache flush
//	SYS$CSERVE - Console service
//	SYS$WRIPIR - interprocessor interrupts
//	SYS$HALT_INTERRUPT - Halt interrupt
//	SYS$PASSIVE_RELEASE - Interrupt, passive release
//	SYS$INTERRUPT - Interrupt
//	SYS$RESET - Reset
//	SYS$ENTER_CONSOLE

//
// Macro to read TLINTRSUMx
//
//  Based on the CPU_NUMBER, read either the TLINTRSUM0 or TLINTRSUM1 register
//
// Assumed register usage:
//  rsum TLINTRSUMx contents
//  raddr node space address
//  scratch scratch register

        
// .macro Read_TLINTRSUMx	rsum, raddr, scratch, ?label1, ?label2
//
//	nop
//	mfpr	'scratch', pt_whami		// Get our whami (VID)
//
//	extbl	'scratch', #1, 'scratch'	// shift down to bit 0
//	lda	'raddr', ^xff88(r31)		// Get base node space address bits
//
//	sll	'raddr', #24, 'raddr'		// Shift up to proper position
//	srl	'scratch', #1, 'rsum'		// Shift off the cpu number
//
//	sll	'rsum', #22, 'rsum'		// Get our node offset
//	addq	'raddr', 'rsum', 'raddr'	// Get our base node space address
//
//	blbs	'scratch', label1
//	lda	'raddr', <tlep$tlintrsum0_offset>('raddr')
//
//	br	r31, label2
//label1:	lda	'raddr', <tlep$tlintrsum1_offset>('raddr')
//
//label2:	ldlp	'rsum', 0('raddr')		// read the right tlintrsum reg
//.endm

#define Read_TLINTRSUMx(_rsum,_raddr,_scratch)  \
	nop; 		\
	mfpr	_scratch,pt_whami;	\
	extbl	_scratch,1,_scratch;	\
	lda	_raddr,0xff88(zero);	\
	sll	_raddr,24,_raddr;	\
	srl	_scratch,1,_rsum;	\
	sll	_rsum,22,_rsum;		\
	addq	_raddr,_rsum,_raddr;	\
	blbs	_scratch,1f;		\
	lda	_raddr,0x1180(_raddr); \
	br	r31,2f;			\
1: 					\
	lda	_raddr,0x11c0(_raddr); \
2:      ldlp    _rsum,0(_raddr)
	


//
// Macro to write TLINTRSUMx
//
//  Based on the CPU_NUMBER, write either the TLINTRSUM0 or TLINTRSUM1 register
//
// Assumed register usage:
//  rsum TLINTRSUMx write data
//  raddr node space address
//  scratch scratch register

// .macro Write_TLINTRSUMx	rsum, raddr, whami, ?label1, ?label2
//
//	nop
//	mfpr	'whami', pt_whami		// Get our whami (VID)
//
//	extbl	'whami', #1, 'whami'		// shift down to bit 0
//	lda	'raddr', ^xff88(r31)		// Get base node space address bits
//
//	sll	'raddr', #24, 'raddr'		// Shift up to proper position
//	blbs	'whami', label1
//
//	lda	'raddr', <tlep$tlintrsum0_offset>('raddr')
//	br	r31, label2
//
// label1:	lda	'raddr', <tlep$tlintrsum1_offset>('raddr')
// label2:	srl	'whami', #1, 'whami'		// Shift off the cpu number
//
//	sll	'whami', #22, 'whami'		// Get our node offset
//	addq	'raddr', 'whami', 'raddr'	// Get our base node space address
//
//	mb
//	stqp	'rsum', 0('raddr')		// write the right tlintrsum reg
//	mb
//	ldqp	'rsum', 0('raddr')		// dummy read to tlintrsum
//	bis	'rsum', 'rsum', 'rsum'		// needed to complete the ldqp above -jpo
// .endm


#define Write_TLINTRSUMx(_rsum,_raddr,_whami)  \
	nop;				\
	mfpr	_whami,pt_whami;	\
	extbl	_whami,1,_whami;	\
	lda	_raddr,0xff88(zero);	\
	sll	_raddr,24,_raddr;	\
	blbs	_whami,1f;		\
	lda	_raddr,0x1180(_raddr);\
	br	zero,2f;		\
1:	lda	_raddr,0x11c0(_raddr);\
2:	srl	_whami,1,_whami;	\
	addq	_raddr,_whami,_raddr;	\
	mb;				\
	stqp	_rsum,0(_raddr);	\
	ldqp	_rsum,0(_raddr);	\
	bis	_rsum,_rsum,_rsum	

	
//
// Macro to determine highest priority TIOP Node ID from interrupt pending mask
//
// Assumed register usage:
//  rmask - TLINTRSUMx contents, shifted to isolate IOx bits 
//  rid - TLSB Node ID of highest TIOP

//.macro Intr_Find_TIOP  rmask, rid, ?l1, ?l2, ?l3, ?l4, ?l5, ?l6
// 	srl	'rmask', #4, 'rid'		// check IOP8
// 	blbc	'rid', l1			// not IOP8
// 
// 	lda	'rid', 8(r31)			// IOP8
// 	br	r31, l6
// 
// l1:	srl	'rmask', #3, 'rid'		// check IOP7
// 	blbc	'rid', l2			// not IOP7
// 
// 	lda	'rid', 7(r31)			// IOP7
// 	br	r31, l6
// 
// l2:	srl	'rmask', #2, 'rid'		// check IOP6
// 	blbc	'rid', l3			// not IOP6
// 
// 	lda	'rid', 6(r31)			// IOP6
// 	br	r31, l6
// 
// l3:	srl	'rmask', #1, 'rid'		// check IOP5
// 	blbc	'rid', l4			// not IOP5
// 
// 	lda	'rid', 5(r31)			// IOP5
// 	br	r31, l6
// 
// l4:	srl	'rmask', #0, 'rid'		// check IOP4
// 	blbc	'rid', l5			// not IOP4
// 
// 	lda	r14, 4(r31)			// IOP4
// 	br	r31, l6
// 
// l5:	lda	r14, 0(r31)			// passive release
// l6:
// .endm


#define Intr_Find_TIOP(_rmask,_rid)     \
	srl	_rmask,3,_rid;		\
	blbc	_rid,1f;		\
	lda	_rid,8(zero);		\
	br	zero,6f;		\
1:	srl	_rmask,3,_rid;		\
 	blbc	_rid, 2f;		\
 	lda	_rid, 7(r31);		\
 	br	r31, 6f;		\
2:	srl	_rmask, 2, _rid;	\
 	blbc	_rid, 3f;		\
 	lda	_rid, 6(r31);		\
 	br	r31, 6f;		\
3:	srl	_rmask, 1, _rid;	\
 	blbc	_rid, 4f;		\
 	lda	_rid, 5(r31);		\
 	br	r31, 6f;		\
4:	srl	_rmask, 0, _rid;	\
 	blbc	_rid, 5f;		\
 	lda	r14, 4(r31);		\
 	br	r31, 6f;		\
5:	lda	r14, 0(r31);		\
6:	




//
// Macro to calculate base node space address for given node id
//
// Assumed register usage:
//  rid - TLSB node id
//  raddr - base node space address

//.macro Get_TLSB_Node_Address  rid, raddr
//	sll	'rid', #22, 'rid'		// Get offset of IOP node
//	lda	'raddr', ^xff88(r31)		// Get base node space address bits
//
//	sll	'raddr', #24, 'raddr'		// Shift up to proper position
//	addq	'raddr', 'rid', 'raddr'		// Get TIOP node space address
//	.iif ne	turbo_pcia_intr_fix,	srl	'rid', #22, 'rid'		// Restore IOP node id
//.endm


#define turbo_pcia_intr_fix 0
               
        
#if turbo_pcia_intr_fix != 0
#define Get_TLSB_Node_Address(_rid,_raddr) \
	sll	_rid,22,_rid;		\
	lda	_raddr,0xff88(zero);	\
	sll	_raddr,24,_raddr;	\
	addq	_raddr,_rid,_raddr;	\
	srl	_rid,22,_rid
#else
#define Get_TLSB_Node_Address(_rid,_raddr) \
	sll	_rid,22,_rid;		\
	lda	_raddr,0xff88(zero);	\
	sll	_raddr,24,_raddr;	\
	addq	_raddr,_rid,_raddr
#endif
                
        
		


// .macro mchk$TLEPstore rlog, rs, rs1, nodebase, tlepreg, clr, tlsb, crd
//	  .iif eq tlsb, lda     'rs1',<tlep$'tlepreg'_offset>(r31)
//	  .iif ne tlsb, lda     'rs1',<tlsb$'tlepreg'_offset>(r31)
//	  or      'rs1', 'nodebase', 'rs1'
//	  ldlp   'rs', 0('rs1')
//	  .iif eq crd,  stlp   'rs', mchk$'tlepreg'('rlog')	// store in frame
//	  .iif ne crd,  stlp   'rs', mchk$crd_'tlepreg'('rlog')	// store in frame
//	  .iif ne clr, stlp 'rs',0('rs1')	// optional write to clear
//	.endm

	
// .macro OSFmchk$TLEPstore tlepreg, clr=0, tlsb=0
//	  mchk$TLEPstore r14, r8, r4, r13, <tlepreg>, <clr>, <tlsb>, crd=0
//	.endm

#define CONCAT(_a,_b) _a ## _b

#define OSFmchk_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) 	\
	lda	_rs1,CONCAT(tlep_,_tlepreg)(zero);		\
	or	_rs1,_nodebase,_rs1;  				\
	ldlp	_rs1,0(_rs1);					\
	stlp	_rs,CONCAT(mchk_,_tlepreg)(_rlog)

        
#define OSFmchk_TLEPstore(_tlepreg) OSFmchk_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
	

// .macro OSFcrd$TLEPstore tlepreg, clr=0, tlsb=0
//	  mchk$TLEPstore r14, r10, r1, r0, <tlepreg>, <clr>, <tlsb>, crd=1
//	.endm

#define OSFcrd_TLEPstore_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) 	\
	lda	_rs1,CONCAT(tlep_,_tlepreg)(zero);		\
	or	_rs1,_nodebase,_rs1;  				\
	ldlp	_rs1,0(_rs1);					\
	stlp	_rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)

#define OSFcrd_TLEPstore_tlsb_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) 	\
	lda	_rs1,CONCAT(tlsb_,_tlepreg)(zero);		\
	or	_rs1,_nodebase,_rs1;  				\
	ldlp	_rs1,0(_rs1);					\
	stlp	_rs,CONCAT(mchk_crd_,_tlepreg)(_rlog)

#define OSFcrd_TLEPstore_tlsb_clr_1(_rlog,_rs,_rs1,_nodebase,_tlepreg) 	\
	lda	_rs1,CONCAT(tlsb_,_tlepreg)(zero);		\
	or	_rs1,_nodebase,_rs1;  				\
	ldlp	_rs1,0(_rs1);					\
	stlp	_rs,CONCAT(mchk_crd_,_tlepreg)(_rlog);		\
        stlp    _rs,0(_rs1)
        
        
#define OSFcrd_TLEPstore(_tlepreg) OSFcrd_TLEPstore_1(r14,r8,r4,r13,_tlepreg)
#define OSFcrd_TLEPstore_tlsb(_tlepreg) OSFcrd_TLEPstore_tlsb_1(r14,r8,r4,r13,_tlepreg)
#define OSFcrd_TLEPstore_tlsb_clr(_tlepreg) OSFcrd_TLEPstore_tlsb_clr_1(r14,r8,r4,r13,_tlepreg)

        


// .macro save_pcia_intr irq
//	and	r13, #^xf, r25			// isolate low 4 bits
//	addq	r14, #4, r14			// format the TIOP Node id field
//	sll	r14, #4, r14			// shift the TIOP Node id
//	or	r14, r25, r10			// merge Node id/hose/HPC
//	mfpr	r14, pt14			// get saved value
//	extbl	r14, #'irq', r25		// confirm none outstanding
//	bne	r25, sys$machine_check_while_in_pal
//	insbl	r10, #'irq', r10		// align new info
//	or	r14, r10, r14			// merge info
//	mtpr	r14, pt14			// save it
//	bic	r13, #^xf, r13			// clear low 4 bits of vector
//	.endm

#define save_pcia_intr(_irq)  \
	and	r13, 0xf, r25;	\
	addq	r14, 4, r14;	\
	sll	r14, 4, r14;	\
	or	r14, r25, r10;	\
	mfpr	r14, pt14;	\
	extbl	r14, _irq, r25;	\
	bne	r25, sys_machine_check_while_in_pal; \
	insbl	r10, _irq, r10;	\
	or	r14, r10, r14;	\
	mtpr	r14, pt14;	\
	bic	r13, 0xf, r13



	ALIGN_BLOCK

// .sbttl	"wripir - PALcode for wripir instruction"
//orig SYS$WRIPIR:				// R16 has the processor number.

EXPORT(sys_wripir)
        
//++
// Convert the processor number to a CPU mask
//--

	and	r16,0xf, r14		// mask the top stuff (16 CPUs supported)
	bis	r31,0x1,r16		// get a one
	sll	r16,r14,r14		// shift the bit to the right place

//++
// Build the Broadcast Space base address
//--
	lda	r13,0xff8e(r31)		// Load the upper address bits
	sll	r13,24,r13		// shift them to the top
  
//++
// Send out the IP Intr
//--
	stqp	r14, 0x40(r13)	// Write to TLIPINTR reg WAS  TLSB_TLIPINTR_OFFSET  
	wmb				// Push out the store

	hw_rei


	ALIGN_BLOCK
// .sbttl	"CFLUSH- PALcode for CFLUSH instruction"
//+
// SYS$CFLUSH
// Entry:
//
//	R16 - contains the PFN of the page to be flushed
//
// Function:
//	Flush all Dstream caches of 1 entire page
//
//-
        
EXPORT(sys_cflush)
        
//      #convert pfn to addr, and clean off <63:20>
//      #sll	r16, <page_offset_size_bits>+<63-20>>, r12
	sll	r16, page_offset_size_bits+(63-20),r12 

//      #ldah	r13,<<1@22>+32768>@-16(r31)// + xxx<31:16>
//      # stolen from srcmax code. XXX bugnion
	lda	r13, 0x10(r31)				   // assume 16Mbytes of cache  
	sll	r13, 20, r13				   // convert to bytes


	srl	r12, 63-20, r12	// shift back to normal position
	xor	r12, r13, r12		// xor addr<18>
	
	or	r31, 8192/(32*8), r13	// get count of loads
	nop

cflush_loop:    
	subq	r13, 1, r13		// decr counter
 	mfpr    r25, ev5__intid         // Fetch level of interruptor

	ldqp	r31, 32*0(r12)		// do a load
	ldqp	r31, 32*1(r12)		// do next load

	ldqp	r31, 32*2(r12)		// do next load
	ldqp	r31, 32*3(r12)		// do next load

	ldqp	r31, 32*4(r12)		// do next load
	ldqp	r31, 32*5(r12)		// do next load

	ldqp	r31, 32*6(r12)		// do next load
	ldqp	r31, 32*7(r12)		// do next load

	mfpr    r14, ev5__ipl           // Fetch current level
	lda	r12, (32*8)(r12)	// skip to next cache block addr

 	cmple   r25, r14, r25           // R25 = 1 if intid .less than or eql ipl
	beq	r25, 1f		// if any int's pending, re-queue CFLUSH -- need to check for hlt interrupt???

	bne	r13, cflush_loop 	// loop till done
	hw_rei				// back to user
	
	ALIGN_BRANCH
1:					// Here if interrupted
	mfpr	r12, exc_addr
	subq	r12, 4, r12		// Backup PC to point to CFLUSH
	
	mtpr	r12, exc_addr
	nop
	
	mfpr	r31, pt0		// Pad exc_addr write	
	hw_rei


	ALIGN_BLOCK
// .sbttl	"CSERVE- PALcode for CSERVE instruction"
//+
// SYS$CSERVE
//
// Function:
//	Various functions for private use of console software
//
//	option selector in r0
//	arguments in r16....
//
//
//	r0 = 0	unknown
//
//	r0 = 1	ldqp
//	r0 = 2	stqp
//		args, are as for normal STQP/LDQP in VMS PAL
//
//	r0 = 3	dump_tb's
//	r16 = detination PA to dump tb's to.
//
//	r0<0> = 1, success
//	r0<0> = 0, failure, or option not supported
//	r0<63:1> = (generally 0, but may be function dependent)
//	r0 - load data on ldqp
//
//-
EXPORT(sys_cserve)        
        
#ifdef SIMOS
        /* taken from scrmax */
	cmpeq	r18, CSERVE_K_RD_IMPURE, r0
	bne	r0, Sys_Cserve_Rd_Impure
	
	cmpeq	r18, CSERVE_K_JTOPAL, r0
	bne	r0, Sys_Cserve_Jtopal
        call_pal        0

	or	r31, r31, r0
	hw_rei				// and back we go

Sys_Cserve_Rd_Impure:
	mfpr	r0, pt_impure		// Get base of impure scratch area.
	hw_rei

	ALIGN_BRANCH

Sys_Cserve_Jtopal:
       	bic	a0, 3, t8		// Clear out low 2 bits of address
       	bis	t8, 1, t8		// Or in PAL mode bit
        mtpr    t8,exc_addr
        hw_rei
	
        
#else /* SIMOS */
        
	cmpeq	r16, cserve_ldlp, r12	// check for ldqp
	bne	r12, 1f		// br if

	cmpeq	r16, cserve_stlp, r12	// check for stqp
	bne	r12, 2f		// br if

	cmpeq	r16, cserve_callback, r12 // check for callback entry
	bne	r12, csrv_callback	// br if

	cmpeq	r16, cserve_identify, r12 // check for callback entry
	bne	r12, csrv_identify	// br if

	or	r31, r31, r0		// set failure
	nop				// pad palshadow write
        
	hw_rei				// and back we go
#endif /* SIMOS */
        	
// ldqp
	ALIGN_QUAD
1:
	ldqp	r0,0(r17)		// get the data
	nop				// pad palshadow write

	hw_rei				// and back we go


// stqp
	ALIGN_QUAD
2:
	stqp	r18, 0(r17)		// store the data
#ifdef SIMOS
        lda     r0,17(r31) // bogus
#else
	lda	r0, CSERVE_SUCCESS(r31)	// set success
#endif
	hw_rei				// and back we go


	ALIGN_QUAD
csrv_callback:
	ldq	r16, 0(r17)		// restore r16
	ldq	r17, 8(r17)		// restore r17
	lda	r0, hlt_c_callback(r31)
	br	r31, sys_enter_console


csrv_identify:
	mfpr	r0, pal_base
	ldqp	r0, 8(r0)
	hw_rei


// dump tb's
	ALIGN_QUAD
0:
	// DTB PTEs - 64 entries
	addq	r31, 64, r0		// initialize loop counter
	nop

1:	mfpr	r12, ev5__dtb_pte_temp	// read out next pte to temp
	mfpr	r12, ev5__dtb_pte	// read out next pte to reg file

	subq	r0, 1, r0		// decrement loop counter
	nop				// Pad - no Mbox instr in cycle after mfpr

	stqp	r12, 0(r16)		// store out PTE
	addq	r16, 8 ,r16		// increment pointer

	bne	r0, 1b

	ALIGN_BRANCH
	// ITB PTEs - 48 entries
	addq	r31, 48, r0		// initialize loop counter
	nop

2:	mfpr	r12, ev5__itb_pte_temp	// read out next pte to temp
	mfpr	r12, ev5__itb_pte	// read out next pte to reg file

	subq	r0, 1, r0		// decrement loop counter
	nop				// 

	stqp	r12, 0(r16)		// store out PTE
	addq	r16, 8 ,r16		// increment pointer

	bne	r0, 2b
	or	r31, 1, r0		// set success

	hw_rei				// and back we go


// .sbttl	"SYS$INTERRUPT - Interrupt processing code"

//+
// SYS$INTERRUPT
//
//	Current state:
//		Stack is pushed
//		ps, sp and gp are updated
//		r12, r14 - available
//		r13 - INTID (new EV5 IPL)
//		r25 - ISR
//		r16, r17, r18 - available
//
//-

  
EXPORT(sys_interrupt)
	cmpeq	r13, 31, r12
	bne	r12, sys_int_mchk_or_crd // Check for level 31 interrupt (machine check or crd)

	cmpeq	r13, 30, r12
	bne	r12, sys_int_powerfail	// Check for level 30 interrupt (powerfail)

	cmpeq	r13, 29, r12
	bne	r12, sys_int_perf_cnt	// Check for level 29 interrupt (performance counters)

	cmpeq	r13, 23, r12
	bne	r12, sys_int_23 		// Check for level 23 interrupt
	
	cmpeq	r13, 22, r12
	bne	r12, sys_int_22 		// Check for level 22 interrupt (might be 
						//  interprocessor or timer interrupt)

	cmpeq	r13, 21, r12
	bne	r12, sys_int_21 		// Check for level 21 interrupt

	cmpeq	r13, 20, r12
	bne	r12, sys_int_20			// Check for level 20 interrupt (might be corrected 
						// system error interrupt)

	mfpr	r14, exc_addr			// ooops, something is wrong
	br	r31, pal_pal_bug_check_from_int




//+
//sys$int_2*
//	Routines to handle device interrupts at IPL 23-20.
//	System specific method to ack/clear the interrupt, detect passive release,
//	  detect interprocessor (22),  interval clock (22),  corrected
//	  system error (20)
//
//	Current state:
//		Stack is pushed
//		ps, sp and gp are updated
//		r12, r14 - available
//		r13 - INTID (new EV5 IPL)
//		r25 - ISR
//
//	On exit:
//		Interrupt has been ack'd/cleared
//		a0/r16 - signals IO device interrupt
//		a1/r17 - contains interrupt vector
//		exit to ent_int address
//
//-
	ALIGN_BRANCH
sys_int_23:
	Read_TLINTRSUMx(r13,r10,r14)		// read the right TLINTRSUMx
	srl	r13, 22, r13			// shift down to examine IPL17

	Intr_Find_TIOP(r13,r14)
	beq	r14, 1f

	Get_TLSB_Node_Address(r14,r10)
	lda	r10, 0xac0(r10)	// Get base TLILID address

	ldlp	r13, 0(r10)			// Read the TLILID register
	bne	r13, pal_post_dev_interrupt

1:	lda	r16, osfint_c_passrel(r31)	// passive release
	br	r31, pal_post_interrupt		// 


	ALIGN_BRANCH
sys_int_22:
        or      r31,1,r16                       // a0 means it is a I/O interrupt
        lda     r8,0x101(r31)
        sll     r8,16,r8
        lda     r8,0xa000(r8)
        sll     r8,16,r8
        lda     r8,0x080(r8)
        or      r31,0x10,r9
        stq_p   r9, 0(r8)                       // clear the rtc interrupt
         
        br	r31, pal_post_interrupt		// 


	ALIGN_BRANCH
sys_int_21:
	Read_TLINTRSUMx(r13,r10,r14)		// read the right TLINTRSUMx
	srl	r13, 12, r13			// shift down to examine IPL15

	Intr_Find_TIOP(r13,r14)
	beq	r14, 1f

	Get_TLSB_Node_Address(r14,r10)
	lda	r10, 0xa40(r10)	// Get base TLILID address

	ldlp	r13, 0(r10)			// Read the TLILID register
#if turbo_pcia_intr_fix == 0        
//orig .if eq	turbo_pcia_intr_fix
	bne	r13, pal_post_dev_interrupt
//orig .iff
	beq	r13, 1f

	and	r13, 0x3, r10			// check for PCIA bits
	beq	r10, pal_post_dev_interrupt	// done if nothing set
	save_pcia_intr(1)
	br	r31, pal_post_dev_interrupt	// 
// orig .endc
#endif  /* turbo_pcia_intr_fix == 0 */
        
1:	lda	r16, osfint_c_passrel(r31)	// passive release
	br	r31, pal_post_interrupt		// 


	ALIGN_BRANCH
sys_int_20:
        or      r31,3,r16                       // a0 means it is a I/O interrupt
        
        bis     r31,0x801,r8
        sll     r8,16,r8
        bis     r8,0xa000,r8
        sll     r8,16,r8
        bis     r8,0x80,r8
        ldl_p   r9, 0(r8)                       // read the MISC register
        
        and     r9,0x1,r10                      // grab LSB and shift left 2
        sll     r10,2,r10
        and     r9,0x2,r11                      // grabl LSB+1 and shift left 5
        sll     r11,5,r11
        
        mskbl   r8,0,r8                         // calculate DIRn address
        bis     r8,0x280,r8
        or      r8,r10,r8
        or      r8,r11,r8
        ldl_p   r9, 0(r8)                       // read DIRn

	or	r31,1,r17
	sll	r17,63,r17			// load a 1 into the msb

find_msb:	
	and	r9,r17,r10
	bne	r10, found_msb
	srl	r17,1,r17
	br	r31, find_msb
	
found_msb:
        mulq    r17,0x10,r17                    // compute 0x900 + (0x10 * Highest DIRn-bit)
        addq    r17,0x900,r17
        
        br      r31, pal_post_interrupt

        
	ALIGN_BRANCH
pal_post_dev_interrupt:
	or	r13, r31, r17			// move vector to a1
	or	r31, osfint_c_dev, r16		// a0 signals IO device interrupt

pal_post_interrupt:
	mfpr	r12, pt_entint

	mtpr	r12, exc_addr

	nop
	nop

	hw_rei_spe



//+
// sys_passive_release
//	Just pretend the interrupt never occurred.
//-

EXPORT(sys_passive_release)
	mtpr	r11, ev5__dtb_cm	// Restore Mbox current mode for ps
	nop
	
	mfpr	r31, pt0		// Pad write to dtb_cm
	hw_rei

//+
//sys_int_powerfail
//	A powerfail interrupt has been detected.  The stack has been pushed.
//	IPL and PS are updated as well.
//
//	I'm not sure what to do here, I'm treating it as an IO device interrupt
//
//-

	ALIGN_BLOCK
sys_int_powerfail:
	lda	r12, 0xffc4(r31)		// get GBUS_MISCR address bits
	sll	r12, 24, r12			// shift to proper position
	ldqp	r12, 0(r12)			// read GBUS_MISCR
	srl	r12, 5, r12			// isolate bit <5>
	blbc	r12, 1f 			// if clear, no missed mchk

						// Missed a CFAIL mchk
	lda	r13, 0xffc7(r31)		// get GBUS$SERNUM address bits
	sll	r13, 24, r13			// shift to proper position
	lda	r14, 0x40(r31)			// get bit <6> mask
	ldqp	r12, 0(r13)			// read GBUS$SERNUM
	or	r12, r14, r14			// set bit <6>
	stqp	r14, 0(r13)			// clear GBUS$SERNUM<6>
	mb
	mb

1:	br	r31, sys_int_mchk		// do a machine check
	
	lda	r17, scb_v_pwrfail(r31)	// a1 to interrupt vector
	mfpr	r25, pt_entint

	lda	r16, osfint_c_dev(r31)	// a0 to device code
	mtpr	r25, exc_addr
	
	nop				// pad exc_addr write
	nop
	
	hw_rei_spe

//+
// sys$halt_interrupt
//       A halt interrupt has been detected.  Pass control to the console.
//
//
//-
        EXPORT(sys_halt_interrupt)
        
	ldah	r13, 0x1800(r31)		// load Halt/^PHalt bits
	Write_TLINTRSUMx(r13,r10,r14)		// clear the ^PHalt bits

	mtpr	r11, dtb_cm		// Restore Mbox current mode
	nop
	nop
	mtpr	r0, pt0
#ifndef SIMOS
        pvc_jsr updpcb, bsr=1
        bsr     r0, pal_update_pcb      // update the pcb
#endif
        lda     r0, hlt_c_hw_halt(r31)  // set halt code to hw halt
        br      r31, sys_enter_console  // enter the console



//+
// sys$int_mchk_or_crd
//
//	Current state:
//		Stack is pushed
//		ps, sp and gp are updated
//		r12
//		r13 - INTID (new EV5 IPL)
//		r14 - exc_addr
//		r25 - ISR
//		r16, r17, r18 - available
//
//-
	ALIGN_BLOCK

sys_int_mchk_or_crd:
	srl	r25, isr_v_mck, r12
	blbs	r12, sys_int_mchk
	//+
	// Not a Machine check interrupt, so must be an Internal CRD interrupt
	//-

	mb					//Clear out Cbox prior to reading IPRs
	srl 	r25, isr_v_crd, r13		//Check for CRD
	blbc	r13, pal_pal_bug_check_from_int	//If CRD not set, shouldn't be here!!!	

	lda	r9, 1(r31)
	sll 	r9, hwint_clr_v_crdc, r9	// get ack bit for crd
	mtpr	r9, ev5__hwint_clr		// ack the crd interrupt

	or	r31, r31, r12			// clear flag
	lda	r9, mchk_c_ecc_c(r31)		// Correctable error MCHK code

sys_merge_sys_corr:
	ldah	r14, 0xfff0(r31)
	mtpr   	r0, pt0				// save r0 for scratch
	zap	r14, 0xE0, r14			// Get Cbox IPR base
	mtpr   	r1, pt1				// save r0 for scratch

	ldqp	r0, ei_addr(r14)		// EI_ADDR IPR
	ldqp	r10, fill_syn(r14)		// FILL_SYN IPR
	bis	r0, r10, r31			// Touch lds to make sure they complete before doing scrub

	blbs	r12, 1f				// no scrubbing for IRQ0 case
// XXX bugnion	pvc_jsr	crd_scrub_mem, bsr=1
	bsr	r13, sys_crd_scrub_mem		// and go scrub

						// ld/st pair in scrub routine will have finished due
						// to ibox stall of stx_c.  Don't need another mb.
	ldqp	r8, ei_stat(r14)		// EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
	or	r8, r31, r12			// Must only be executed once in this flow, and must
	br	r31, 2f				// be after the scrub routine.

1:	ldqp	r8, ei_stat(r14)		// EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
						// For IRQ0 CRD case only - meaningless data.

2:	mfpr	r13, pt_mces			// Get MCES
	srl	r12, ei_stat_v_ei_es, r14	// Isolate EI_STAT:EI_ES
	blbc	r14, 6f			// branch if 630
	srl	r13, mces_v_dsc, r14		// check if 620 reporting disabled
	blbc	r14, 5f				// branch if enabled
	or	r13, r31, r14			// don't set SCE if disabled
	br	r31, 8f			// continue
5:	bis	r13, BIT(mces_v_sce), r14	// Set MCES<SCE> bit
	br	r31, 8f

6:     	srl	r13, mces_v_dpc, r14		// check if 630 reporting disabled
	blbc	r14, 7f			// branch if enabled
	or	r13, r31, r14			// don't set PCE if disabled
	br	r31, 8f			// continue
7:	bis	r13, BIT(mces_v_pce), r14	// Set MCES<PCE> bit

	// Setup SCB if dpc is not set
8:	mtpr	r14, pt_mces			// Store updated MCES
	srl	r13, mces_v_sce, r1		// Get SCE
	srl	r13, mces_v_pce, r14		// Get PCE
	or	r1, r14, r1			// SCE OR PCE, since they share
						// the CRD logout frame
	// Get base of the logout area.  
	GET_IMPURE(r14)				 // addr of per-cpu impure area
	GET_ADDR(r14,(pal_logout_area+mchk_crd_base),r14)

	blbc	r1, sys_crd_write_logout_frame	// If pce/sce not set, build the frame

	// Set the 2nd error flag in the logout area:
	
	lda     r1, 3(r31)			// Set retry and 2nd error flags
	sll	r1, 30, r1			// Move to bits 31:30 of logout frame flag longword
	stlp	r1, mchk_crd_flag+4(r14)	// store flag longword
	br 	sys_crd_ack                
                                          
sys_crd_write_logout_frame:               
	// should only be here if neither the pce or sce bits are set
                                          
	//+                                
	// Write the mchk code to the logout area
	//-                                
	stqp	r9, mchk_crd_mchk_code(r14)   


	//+                                
	// Write the first 2 quadwords of the logout area:
	//-                                
	lda     r1, 1(r31)		  	// Set retry flag
	sll	r1, 63, r9		  	// Move retry flag to bit 63
	lda	r1, mchk_crd_size(r9)	  	// Combine retry flag and frame size
	stqp	r1, mchk_crd_flag(r14)	  	// store flag/frame size
                                   
#ifndef SIMOS
        /* needed? bugnion */               
	lda	r1, mchk_crd_sys_base(r31)	// sys offset
	sll	r1, 32, r1
	lda	r1, mchk_crd_cpu_base(r1)  	// cpu offset
	stqp	r1, mchk_crd_offsets(r14) 	// store sys offset/cpu offset into logout frame
                         
#endif                         
	//+                                
	// Write error IPRs already fetched to the logout area
	//-                                
	stqp	r0, mchk_crd_ei_addr(r14)    
	stqp	r10, mchk_crd_fill_syn(r14)   
	stqp	r8, mchk_crd_ei_stat(r14)    
	stqp	r25, mchk_crd_isr(r14)    
	//+
	// Log system specific info here
	//-
crd_storeTLEP_:
	lda	r1, 0xffc4(r31)			// Get GBUS$MISCR address
	sll	r1, 24, r1
	ldqp	r1, 0(r1)			// Read GBUS$MISCR 
	sll	r1, 16, r1			// shift up to proper field
	mfpr	r10, pt_whami			// get our node id
	extbl	r10, 1, r10			// shift to bit 0
	or	r1, r10, r1			// merge MISCR and WHAMI
	stlp	r1, mchk_crd_whami(r14)		// write to crd logout area
	srl	r10, 1, r10			// shift off cpu number

	Get_TLSB_Node_Address(r10,r0)		// compute our nodespace address

	OSFcrd_TLEPstore_tlsb(tldev)
	OSFcrd_TLEPstore_tlsb_clr(tlber)
	OSFcrd_TLEPstore_tlsb_clr(tlesr0)
	OSFcrd_TLEPstore_tlsb_clr(tlesr1)
	OSFcrd_TLEPstore_tlsb_clr(tlesr2)
	OSFcrd_TLEPstore_tlsb_clr(tlesr3)

sys_crd_ack:                               
	mfpr	r0, pt0					// restore r0
	mfpr	r1, pt1					// restore r1

	srl	r12, ei_stat_v_ei_es, r12
	blbc	r12, 5f
	srl	r13, mces_v_dsc, r10			// logging enabled?
	br	r31, 6f
5:	srl	r13, mces_v_dpc, r10			// logging enabled?
6:	blbc	r10, sys_crd_post_interrupt		// logging enabled -- report it

							// logging not enabled -- 
	// Get base of the logout area.  
	GET_IMPURE(r13)				 // addr of per-cpu impure area
	GET_ADDR(r13,(pal_logout_area+mchk_crd_base),r13)
	ldlp	r10, mchk_crd_rsvd(r13)			// bump counter
	addl	r10, 1, r10
	stlp	r10, mchk_crd_rsvd(r13)
	mb
	br	r31, sys_crd_dismiss_interrupt		// just return
                                          
	//+
	// The stack is pushed.  Load up a0,a1,a2 and vector via entInt
	//
	//-

	ALIGN_BRANCH
sys_crd_post_interrupt:
	lda	r16, osfint_c_mchk(r31)	// flag as mchk/crd in a0
	lda	r17, scb_v_proc_corr_err(r31) // a1 <- interrupt vector

	blbc	r12, 1f
	lda	r17, scb_v_sys_corr_err(r31) // a1 <- interrupt vector

1:	subq    r31, 1, r18            // get a -1
	mfpr	r25, pt_entInt

        srl     r18, 42, r18           // shift off low bits of kseg addr
	mtpr	r25, exc_addr		// load interrupt vector

        sll     r18, 42, r18           // shift back into position
        or    	r14, r18, r18           // EV4 algorithm - pass pointer to mchk frame as kseg address
	
	hw_rei_spe			// done


	//+ 
	// The stack is pushed.  Need to back out of it all. 
	//-

sys_crd_dismiss_interrupt:
	br	r31, Call_Pal_Rti


// .sbttl	sys_crd_scrub_mem

	//+
	//
	// sys_crd_scrub_mem
	//	called
	//	jsr r13, sys$crd_scrub_mem
	//	r0 = addr of cache block 
	//
	//-

	
	
	ALIGN_BLOCK	// align for branch target
sys_crd_scrub_mem:
	// now find error in memory, and attempt to scrub that cache block
	// This routine just scrubs the failing octaword
	// Only need to "touch" one quadword per octaword to accomplish the scrub
	srl	r0, 39, r8		// get high bit of bad pa
	blbs	r8, 1f  		// don't attempt fixup on IO space addrs
	nop				// needed to align the ldqpl to octaword boundary
	nop				//             "

	ldqpl 	r8,  0(r0) 		// attempt to read the bad memory
					// location
					//    (Note bits 63:40,3:0 of ei_addr 
					//     are set to 1, but as long as 
					//     we are doing a phys ref, should 
					//     be ok)
	nop				// Needed to keep the Ibox from swapping the ldqpl into E1

	stqpc 	r8,  0(r0) 		// Store it back if it is still there.
					// If store fails, location already 
					//  scrubbed by someone else	

	nop				// needed to align the ldqpl to octaword boundary

	lda	r8, 0x20(r31)		// flip bit 5 to touch next hexaword
	xor	r8, r0, r0		
	nop				// needed to align the ldqpl to octaword boundary
	nop				//             "

	ldqpl 	r8,  0(r0) 		// attempt to read the bad memory
					// location
					//    (Note bits 63:40,3:0 of ei_addr 
					//     are set to 1, but as long as 
					//     we are doing a phys ref, should 
					//     be ok)
	nop				// Needed to keep the Ibox from swapping the ldqpl into E1

	stqpc 	r8,  0(r0) 		// Store it back if it is still there.
					// If store fails, location already 
					//  scrubbed by someone else	

	lda	r8, 0x20(r31)		// restore r0 to original address
	xor	r8, r0, r0		

	//at this point, ei_stat could be locked due to a new corr error on the ld, 
	//so read ei_stat to unlock AFTER this routine.

// XXX bugnion	pvc$jsr	crd_scrub_mem, bsr=1, dest=1
1:	ret	r31, (r13)		// and back we go


// .sbttl "SYS$INT_MCHK - MCHK Interrupt code"
//+
// Machine check interrupt from the system.  Setup and join the
// regular machine check flow.
// On exit:
//       pt0     - saved r0
//       pt1     - saved r1
//       pt4     - saved r4
//       pt5     - saved r5
//       pt6     - saved r6
//       pt10    - saved exc_addr
//       pt_misc<47:32> - mchk code
//       pt_misc<31:16> - scb vector
//       r14     - base of Cbox IPRs in IO space
//       MCES<mchk> is set
//-
	ALIGN_BLOCK
sys_int_mchk:					
	lda	r14, mchk_c_sys_hrd_error(r31)
	mfpr	r12, exc_addr
	
	addq	r14, 1, r14			// Flag as interrupt
	nop

	sll	r14, 32, r14			// Move mchk code to position
	mtpr	r12, pt10			// Stash exc_addr

	mfpr	r12, pt_misc			// Get MCES and scratch
	mtpr	r0, pt0				// Stash for scratch

	zap	r12, 0x3c, r12			// Clear scratch
        blbs    r12, sys_double_machine_check   // MCHK halt if double machine check		

	or	r12, r14, r12			// Combine mchk code 
	lda	r14, scb_v_sysmchk(r31)		// Get SCB vector

	sll	r14, 16, r14			// Move SCBv to position
	or	r12, r14, r14			// Combine SCBv

	bis	r14, BIT(mces_v_mchk), r14	// Set MCES<MCHK> bit
	mtpr	r14, pt_misc			// Save mchk code!scbv!whami!mces

	ldah	r14, 0xfff0(r31)
	mtpr	r1, pt1				// Stash for scratch

	zap	r14, 0xE0, r14			// Get Cbox IPR base
	mtpr	r4, pt4

	mtpr	r5, pt5

#if beh_model        
//  .if ne beh_model
	ldah	r25, 0xC000(r31)		// Get base of demon space
	lda	r25, 0x340(r25)			// Add interrupt demon offset
	
	ldqp	r13, 0(r25)			// Read the control register
	nop

	and	r13, 0x10, r8			// For debug, check that the interrupt is expected
	beq	r8, interrupt_not_expected
	
	bic	r13, 0x10, r13
	stqp	r13, 0(r25)			// Ack and clear the interrupt
// XXX bugnion	pvc$violate 379				// stqp can't trap except replay.  mt ipr only problem if mf same ipr in same shadow
   .endc
#endif        

	mtpr	r6, pt6
	br	r31, sys_mchk_collect_iprs	// Join common machine check flow


// .sbttl  "SYS$INT_PERF_CNT - Performance counter interrupt code"
//+
//sys$int_perf_cnt
//
//	A performance counter interrupt has been detected.  The stack has been pushed.
//	IPL and PS are updated as well.
//
//	on exit to interrupt entry point ENTINT:: 
//		a0 = osfint$c_perf
//		a1 = scb$v_perfmon (650)
//		a2 = 0 if performance counter 0 fired
//		a2 = 1 if performance counter 1 fired
//		a2 = 2 if performance counter 2 fired
//		     (if more than one counter overflowed, an interrupt will be 
//			generated for each counter that overflows)
//	
//
//-
	ALIGN_BLOCK
sys_int_perf_cnt:			// Performance counter interrupt
	lda	r17, scb_v_perfmon(r31)	// a1 to interrupt vector
	mfpr	r25, pt_entint

	lda	r16, osfint_c_perf(r31)	// a0 to perf counter code
	mtpr	r25, exc_addr
	
	//isolate which perf ctr fired, load code in a2, and ack
	mfpr	r25, isr
	or	r31, r31, r18			// assume interrupt was pc0

	srl	r25, isr_v_pc1, r25		// isolate 
	cmovlbs	r25, 1, r18			// if pc1 set, load 1 into r14

	srl	r25, 1, r25			// get pc2
	cmovlbs r25, 2, r18			// if pc2 set, load 2 into r14

	lda	r25, 1(r31)			// get a one
	sll	r25, r18, r25

	sll	r25, hwint_clr_v_pc0c, r25	// ack only the perf counter that generated the interrupt
	mtpr	r25, hwint_clr
	
	hw_rei_spe



	ALIGN_BLOCK
// .sbttl	"System specific RESET code"
//+
//  RESET code
//   On entry:
//	r1 = pal_base +8
//
//	Entry state on trap:
//       r0 = whami
//       r2 = base of scratch area
//       r3 = halt code
//	and the following 3 if init_cbox is enabled:
//       r5 = sc_ctl
//       r6 = bc_ctl
//       r7 = bc_cnfg
//
//       Entry state on switch:
// 	r17 - new PC
// 	r18 - new PCBB
// 	r19 - new VPTB
//
//-

#if rax_mode==0
        .globl sys_reset
sys_reset:
//	mtpr	r31, ic_flush_ctl	// do not flush the icache - done by hardware before SROM load
	mtpr	r31, itb_ia		// clear the ITB
	mtpr	r31, dtb_ia		// clear the DTB

	lda	r1, -8(r1)		// point to start of code
	mtpr	r1, pal_base		// initialize PAL_BASE

	// Interrupts
	mtpr	r31, astrr		// stop ASTs
	mtpr	r31, aster		// stop ASTs
	mtpr	r31, sirr		// clear software interrupts
	
	mtpr	r0, pt1			// r0 is whami (unless we entered via swp)

//orig	ldah	r1, <<1@<icsr$v_sde-16>> ! <1@<icsr$v_fpe-16>> ! <2@<icsr$v_spe-16>>>(r31)
        ldah     r1,(BIT(icsr_v_sde-16)|BIT(icsr_v_fpe-16)|BIT(icsr_v_spe-16+1))(zero)
        
#if disable_crd == 0
// .if eq disable_crd
	bis	r31, 1, r0
	sll	r0, icsr_v_crde, r0	// A 1 in iscr<corr_read_enable>
	or	r0, r1, r1		// Set the bit
#endif
                
	mtpr	r1, icsr		// ICSR - Shadows enabled, Floating point enable, 
					//	super page enabled, correct read per assembly option

	// Mbox/Dcache init
//orig	lda	r1, <1@<mcsr$v_sp1>>(r31)
        lda     r1,BIT(mcsr_v_sp1)(zero)
        
	mtpr	r1, mcsr		// MCSR - Super page enabled
	lda	r1, BIT(dc_mode_v_dc_ena)(r31)
	ALIGN_BRANCH
//	mtpr	r1, dc_mode		// turn Dcache on
	nop
	
	mfpr	r31, pt0		// No Mbox instr in 1,2,3,4
	mfpr	r31, pt0
	mfpr	r31, pt0
	mfpr	r31, pt0
	mtpr	r31, dc_flush		// flush Dcache

	// build PS (IPL=7,CM=K,VMM=0,SW=0)
	lda	r11, 0x7(r31)		// Set shadow copy of PS - kern mode, IPL=7
	lda	r1, 0x1F(r31)		
	mtpr	r1, ipl			// set internal <ipl>=1F
	mtpr	r31, ev5__ps			// set new ps<cm>=0, Ibox copy
	mtpr	r31, dtb_cm		// set new ps<cm>=0, Mbox copy

	// Create the PALtemp pt_intmask -
	//   MAP:
	//	OSF IPL		EV5 internal IPL(hex)	note
	//	0		0
	//	1		1
	//	2		2
	//	3		14			device
	//	4		15			device
	//	5		16			device	
	//	6		1E			device,performance counter, powerfail
	//	7		1F
	//
	
	ldah	r1, 0x1f1E(r31)		// Create upper lw of int_mask
	lda	r1, 0x1615(r1)

	sll	r1, 32, r1
	ldah	r1, 0x1402(r1)		// Create lower lw of int_mask
	
	lda	r1, 0x0100(r1)
	mtpr	r1, pt_intmask		// Stash in PALtemp

	// Unlock a bunch of chip internal IPRs
	mtpr	r31, exc_sum		// clear out exeception summary and exc_mask
	mfpr	r31, va			// unlock va, mmstat
//rig	lda	r8, <<1@icperr_stat$v_dpe> ! <1@icperr_stat$v_tpe> ! <1@icperr_stat$v_tmr>>(r31)
        lda     r8,(BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(zero)
        
	mtpr	r8, icperr_stat			// Clear Icache parity error & timeout status
//orig	lda	r8, <<1@dcperr_stat$v_lock> ! <1@dcperr_stat$v_seo>>(r31)
        lda	r8,(BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
        
        mtpr	r8, dcperr_stat			// Clear Dcache parity error status

	rc	r0			// clear intr_flag
	mtpr	r31, pt_trap

	mfpr	r0, pt_misc
	srl	r0, pt_misc_v_switch, r1
	blbs	r1, sys_reset_switch	// see if we got here from swppal

	// Rest of the "real" reset flow
	// ASN
	mtpr	r31, dtb_asn
	mtpr	r31, itb_asn

	lda	r1, 0x67(r31)
	sll	r1, hwint_clr_v_pc0c, r1
	mtpr	r1, hwint_clr		// Clear hardware interrupt requests

	lda	r1, BIT(mces_v_dpc)(r31) // 1 in disable processor correctable error
	mfpr	r0, pt1			// get whami
	insbl	r0, 1, r0		// isolate whami in correct pt_misc position
	or	r0, r1, r1		// combine whami and mces
	mtpr	r1, pt_misc		// store whami and mces, swap bit clear

	zapnot	r3, 1, r0		// isolate halt code
	mtpr	r0, pt0			// save entry type

	// Cycle counter
	or	r31, 1, r9		// get a one
	sll	r9, 32, r9		// shift to <32>
	mtpr	r31, cc			// clear Cycle Counter
	mtpr	r9, cc_ctl		// clear and enable the Cycle Counter
	mtpr	r31, pt_scc		// clear System Cycle Counter


	// Misc PALtemps
	mtpr	r31, maf_mode		// no mbox instructions for 3 cycles
	or	r31, 1, r1		// get bogus scbb value
	mtpr	r1, pt_scbb		// load scbb
	mtpr	r31, pt_prbr		// clear out prbr
#ifdef SIMOS
//        or      zero,kludge_initial_pcbb,r1
        GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
#else
	mfpr	r1, pal_base
//orig	sget_addr r1, (kludge_initial_pcbb-pal$base), r1, verify=0// get address for temp pcbb
        GET_ADDR(r1, (kludge_initial_pcbb-pal_base), r1)
#endif        
	mtpr	r1, pt_pcbb		// load pcbb
	lda	r1, 2(r31)		// get a two
	sll	r1, 32, r1		// gen up upper bits
	mtpr	r1, mvptbr
	mtpr	r1, ivptbr
	mtpr	r31, pt_ptbr
	// Performance counters
	mtpr	r31, pmctr	

#if init_cbox != 0
//  .if ne init_cbox
	//   Only init the Scache and the Bcache if there have been no previous
	//   cacheable  dstream loads or stores.
	//
	//   Inputs:
        //       r5    - sc_ctl
        //       r6    - bc_ctl
        //       r7    - bc_cnfg

	ldah	r0, 0xfff0(r31)
	zap	r0, 0xE0, r0		// Get Cbox IPR base
	ldqp	r19, ev5__sc_ctl(r0)	// read current sc_ctl
temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
	lda	r20, temp(r31) 		// create default bc_ctl (bc disabled, errors disabled, ecc mode)
	sll	r20, 1, r20
temp = 0x017441				// default bc_config
	get_addr r21, temp, r31		// create default bc_config
	lda	r23, <1@sc_ctl_v_sc_flush>(r31)	//set flag to invalidate scache in set_sc_bc_ctl

// XXX bugnion	pvc$jsr scbcctl, bsr=1
	bsr	r10, set_sc_bc_ctl
	update_bc_ctl_shadow r6, r23	// update bc_ctl shadow using r6 as input// r23 gets adjusted impure pointer
	store_reg1 bc_config, r7, r23, ipr=1  // update bc_config shadow in impure area
//  .endc
#endif 
	// Clear pmctr_ctl in impure area
        
#ifndef SIMOS
        // can't assemble ???
        update_pmctr_ctl r31, r1	// clear pmctr_ctl // r1 trashed
#endif
        
	ldah	r14, 0xfff0(r31)
	zap	r14, 0xE0, r14		// Get Cbox IPR base
#ifndef SIMOS
	ldqp	r31, sc_stat(r14)	// Clear sc_stat and sc_addr
	ldqp	r31, ei_stat(r14)
	ldqp	r31, ei_stat(r14)	// Clear ei_stat, ei_addr, bc_tag_addr, fill_syn
#endif
	GET_IMPURE(r13)
	stqpc	r31, 0(r13)		// Clear lock_flag

	mfpr	r0, pt0			// get entry type
	br	r31, sys_enter_console	// enter the cosole

#endif /* rax_mode == 0 */




//.if ne rax_mode
#if rax_mode != 0

	// For RAX:
	// 	r0    - icsr at first, then used for cbox ipr base offset
	// 	r2    - mcsr
	//	r3    - dc_mode
	//	r4    - maf_mode
	//	r5    - sc_ctl
	// 	r6    - bc_ctl
	// 	r7    - bc_cnfg
        .globl  sys_reset
sys_reset:
	mtpr	r31, ev5__dtb_cm	// set mbox mode to kernel
        mtpr 	r31, ev5__ps            // set Ibox mode to kernel - E1 

        mtpr 	r0, ev5__icsr		// Load ICSR - E1 

        mtpr    r2, ev5__mcsr
	mfpr	r8, pal_base
	
	ldah	r0, 0xfff0(r31)
	zap	r0, 0xE0, r0		// Get Cbox IPR base
	
	mtpr	r31, ev5__itb_asn	// clear asn - E1 
	ldqp	r19, ev5__sc_ctl(r0)	// read current sc_ctl

temp = <<<1@bc_ctl$v_ei_dis_err> + <1@bc_ctl$v_ei_ecc_or_parity> + <1@bc_ctl$v_corr_fill_dat>>@-1>
	lda	r20, temp(r31) 		// create default bc_ctl (bc disabled, errors disabled, ecc mode)
	sll	r20, 1, r20

temp = 0x017441				// default bc_config
	get_addr r21, temp, r31		// create default bc_config
	lda	r23, <1@sc_ctl_v_sc_flush>(r31)	//set flag to invalidate scache in set_sc_bc_ctl

// XXX bugnion	pvc$jsr scbcctl, bsr=1
	bsr	r10, set_sc_bc_ctl
	update_bc_ctl_shadow	r6, r2	// initialize bc_ctl shadow// adjusted impure pointer in r2
	store_reg1	pmctr_ctl, r31, r2, ipr=1	// clear pmctr_ctl 
	store_reg1	bc_config, r7, r2, ipr=1	// initialize bc_config shadow

	mtpr 	r3, ev5__dc_mode	// write dc_mode
	mtpr	r31, ev5__dc_flush	// flush dcache

	mtpr	r31, ev5__exc_sum	// clear exc_sum - E1 
	mtpr	r31, ev5__exc_mask	// clear exc_mask - E1 

	ldah	r2, 4(r31)		// For EXC_ADDR
	mtpr	r2, ev5__exc_addr	// EXC_ADDR to 40000 (hex)

	mtpr	r31, ev5__sirr		// Clear SW interrupts (for ISP)
	mtpr 	r4, ev5__maf_mode	// write maf_mode

	mtpr	r31, ev5__alt_mode	// set alt_mode to kernel
        mtpr 	r31, ev5__itb_ia        // clear ITB - E1 

	lda	r1, 0x1F(r31)		// For IPL
	mtpr	r1, ev5__ipl		// IPL to 1F

	mtpr	r31, ev5__hwint_clr	// clear hardware interrupts
	mtpr	r31, ev5__aster		// disable AST interrupts

	mtpr	r31, ev5__astrr		// clear AST requests
	mtpr	r31, ev5__dtb_ia	// clear dtb

	nop
	mtpr	r31, pt_trap

	srl	r2, page_offset_size_bits, r9   // Start to make PTE for address 40000
        sll     r9, 32, r9

        lda     r9, 0x7F01(r9)          // Make PTE, V set, all RE set, all but UWE set
	nop

	mtpr	r9, dtb_pte		// ACORE hack, load TB with 1-1 translation for address 40000
	mtpr	r2, itb_tag		// ACORE hack, load TB with 1-1 translation for address 40000
	
	mtpr	r2, dtb_tag
	mtpr	r9, itb_pte

	and	r31, r31, r0		// clear deposited registers, note: r2 already overwritten
	and	r31, r31, r3

	and	r31, r31, r4
	and	r31, r31, r5

	and	r31, r31, r6
	and	r31, r31, r7

	hw_rei				//May need to be a rei_stall since
					//we write to TB's above
					//However, it currently works ok. (JH)


// .endc
#endif /*rax_mode != 0 */


	// swppal entry
	// r0 - pt_misc
	// r17 - new PC
	// r18 - new PCBB
	// r19 - new VPTB
sys_reset_switch:
	or	r31, 1, r9
	sll	r9, pt_misc_v_switch, r9
	bic	r0, r9, r0		// clear switch bit
	mtpr	r0, pt_misc

	rpcc	r1			// get cyccounter

	ldqp	r22, osfpcb_q_fen(r18)	// get new fen/pme
	ldlp	r23, osfpcb_l_cc(r18)	// get cycle counter
	ldlp	r24, osfpcb_l_asn(r18)	// get new asn


	ldqp	r25, osfpcb_q_Mmptr(r18)// get new mmptr
	sll	r25, page_offset_size_bits, r25 // convert pfn to pa
	mtpr	r25, pt_ptbr		// load the new mmptr
	mtpr	r18, pt_pcbb		// set new pcbb

	bic	r17, 3, r17		// clean use pc
	mtpr	r17, exc_addr		// set new pc
	mtpr	r19, mvptbr
	mtpr	r19, ivptbr

	ldqp	r30, osfpcb_q_Usp(r18)	// get new usp
	mtpr	r30, pt_usp		// save usp
	
	sll	r24, dtb_asn_v_asn, r8
	mtpr	r8, dtb_asn
	sll	r24, itb_asn_v_asn, r24
	mtpr	r24, itb_asn

	mfpr	r25, icsr		// get current icsr
	lda	r24, 1(r31)
	sll	r24, icsr_v_fpe, r24	// 1 in icsr<fpe> position
	bic	r25, r24, r25		// clean out old fpe
	and	r22, 1, r22		// isolate new fen bit
	sll	r22, icsr_v_fpe, r22
	or	r22, r25, r25		// or in new fpe
	mtpr	r25, icsr		// update ibox ipr

	subl	r23, r1, r1		// gen new cc offset
	insll	r1, 4, r1		// << 32
	mtpr	r1, cc			// set new offset

	or	r31, r31, r0		// set success
   	ldqp	r30, osfpcb_q_Ksp(r18)	// get new ksp
	mfpr	r31, pt0		// stall
	hw_rei_stall

// .sbttl	"SYS_MACHINE_CHECK - Machine check PAL"
	ALIGN_BLOCK
//+
//sys$machine_check
// 	A machine_check trap has occurred.  The Icache has been flushed.
//
//-

EXPORT(sys_machine_check)
						// Need to fill up the refill buffer (32 instructions) and
						// then flush the Icache again.
						// Also, due to possible 2nd Cbox register file write for
						// uncorrectable errors, no register file read or write for 7 cycles.

	nop
	mtpr	r0, pt0				// Stash for scratch -- OK if Cbox overwrites r0 later

	nop
	nop

	nop
	nop

	nop
	nop

	nop
	nop
						// 10 instructions// 5 cycles

	nop
	nop

	nop
	nop

						// Register file can now be written
	lda	r0, scb_v_procmchk(r31)		// SCB vector
	mfpr	r13, pt_mces			// Get MCES
	sll	r0, 16, r0			// Move SCBv to correct position
//	bis	r13, #<1@mces$v_mchk>, r14	// Set MCES<MCHK> bit
	bis	r13, BIT(mces_v_mchk), r14	// Set MCES<MCHK> bit


	zap	r14, 0x3C, r14			// Clear mchk_code word and SCBv word 
	mtpr	r14, pt_mces
						// 20 instructions

	nop
	or	r14, r0, r14			// Insert new SCB vector
	lda	r0, mchk_c_proc_hrd_error(r31)	// MCHK code
	mfpr	r12, exc_addr

	sll	r0, 32, r0			// Move MCHK code to correct position
	mtpr	r4, pt4
	or	r14, r0, r14			// Insert new MCHK code
	mtpr	r14, pt_misc			// Store updated MCES, MCHK code, and SCBv

	ldah	r14, 0xfff0(r31)
	mtpr	r1, pt1				// Stash for scratch - 30 instructions

	zap	r14, 0xE0, r14			// Get Cbox IPR base
	mtpr	r12, pt10			// Stash exc_addr



	mtpr	r31, ic_flush_ctl			// Second Icache flush, now it is really flushed.
	blbs	r13, sys_double_machine_check		// MCHK halt if double machine check

	mtpr	r6, pt6
	mtpr	r5, pt5

	// Look for the powerfail cases here....
	mfpr	r4, isr
	srl	r4, isr_v_pfl, r4
	blbc	r4, sys_mchk_collect_iprs	// skip if no powerfail interrupt pending
	lda	r4, 0xffc4(r31)			// get GBUS$MISCR address bits
	sll	r4, 24, r4			// shift to proper position
	ldqp	r4, 0(r4)			// read GBUS$MISCR
	srl	r4, 5, r4			// isolate bit <5>
	blbc	r4, sys_mchk_collect_iprs	// skip if already cleared
						// No missed CFAIL mchk
	lda	r5, 0xffc7(r31)			// get GBUS$SERNUM address bits
	sll	r5, 24, r5			// shift to proper position
	lda	r6, 0x40(r31)			// get bit <6> mask
	ldqp	r4, 0(r5)			// read GBUS$SERNUM
	or	r4, r6, r6			// set bit <6>
	stqp	r6, 0(r5)			// clear GBUS$SERNUM<6>
	mb
	mb

	
	//+
	// Start to collect the IPRs.  Common entry point for mchk flows.
	//
	// Current state:
	//	pt0	- saved r0
	//	pt1	- saved	r1
	//	pt4	- saved r4
	//	pt5	- saved r5
	//	pt6	- saved r6
	//	pt10	- saved exc_addr
	//	pt_misc<47:32> - mchk code 
	//	pt_misc<31:16> - scb vector
	//	r14	- base of Cbox IPRs in IO space
	//	r0, r1, r4, r5, r6, r12, r13, r25 - available
	//	r8, r9, r10 - available as all loads are physical
	//	MCES<mchk> is set
	//
	//-

EXPORT(sys_mchk_collect_iprs)
	mb						// MB before reading Scache IPRs
	mfpr	r1, icperr_stat

	mfpr	r8, dcperr_stat
	mtpr	r31, dc_flush				// Flush the Dcache
	
	mfpr	r31, pt0				// Pad Mbox instructions from dc_flush
	mfpr	r31, pt0
	nop
	nop

	ldqp	r9, sc_addr(r14)			// SC_ADDR IPR
	bis	r9, r31, r31				// Touch ld to make sure it completes before
							// read of SC_STAT
	ldqp	r10, sc_stat(r14)			// SC_STAT, also unlocks SC_ADDR

	ldqp	r12, ei_addr(r14)			// EI_ADDR IPR
	ldqp	r13, bc_tag_addr(r14)			// BC_TAG_ADDR IPR
	ldqp	r0, fill_syn(r14)			// FILL_SYN IPR
	bis	r12, r13, r31				// Touch lds to make sure they complete before reading EI_STAT
	bis	r0, r0, r31				// Touch lds to make sure they complete before reading EI_STAT
	ldqp	r25, ei_stat(r14)			// EI_STAT, unlock EI_ADDR, BC_TAG_ADDR, FILL_SYN
	ldqp	r31, ei_stat(r14)			// Read again to insure it is unlocked


	

	//+
	// Look for nonretryable cases
	// In this segment:
	//	r5<0> = 1 means retryable
	//	r4, r6, and r14 are available for scratch
	//
	//-


	bis	r31, r31, r5				// Clear local retryable flag
	srl	r25, ei_stat_v_bc_tperr, r25		// Move EI_STAT status bits to low bits
	
	lda	r4, 1(r31)
	sll	r4, icperr_stat_v_tmr, r4
	and 	r1, r4, r4				// Timeout reset
	bne	r4, sys_cpu_mchk_not_retryable

	and	r8, BIT(dcperr_stat_v_lock), r4		// DCache parity error locked
	bne	r4, sys_cpu_mchk_not_retryable

	lda	r4, 1(r31)
	sll	r4, sc_stat_v_sc_scnd_err, r4
	and	r10, r4, r4				// 2nd Scache error occurred
	bne	r4, sys_cpu_mchk_not_retryable
	

	bis	r31, 0xa3, r4				// EI_STAT Bcache Tag Parity Error, Bcache Tag Control
							// Parity Error, Interface Parity Error, 2nd Error

	and	r25, r4, r4
	bne	r4, sys_cpu_mchk_not_retryable
	
//	bis	r31, #<1@<ei_stat$v_unc_ecc_err-ei_stat$v_bc_tperr>>, r4
	bis	r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
	and	r25, r4, r4				// Isolate the Uncorrectable Error Bit
//	bis	r31, #<1@<ei_stat$v_fil_ird-ei_stat$v_bc_tperr>>, r6
	bis	r31, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r6 // Isolate the Iread bit
	cmovne	r6, 0, r4				// r4 = 0 if IRD or if No Uncorrectable Error
        bne     r4, sys_cpu_mchk_not_retryable		

	lda	r4, 7(r31)
	and 	r10, r4, r4				// Isolate the Scache Tag Parity Error bits
	bne	r4, sys_cpu_mchk_not_retryable		// All Scache Tag PEs are not retryable


	lda	r4, 0x7f8(r31)
	and	r10, r4, r4				// Isolate the Scache Data Parity Error bits
	srl	r10, sc_stat_v_cbox_cmd, r6
	and	r6, 0x1f, r6				// Isolate Scache Command field
	subq	r6, 1, r6				// Scache Iread command = 1
	cmoveq	r6, 0, r4				// r4 = 0 if IRD or if No Parity Error
        bne     r4, sys_cpu_mchk_not_retryable

	// Look for the system unretryable cases here....

	mfpr	r4, isr					// mchk_interrupt pin asserted
	srl	r4, isr_v_mck, r4
	blbs	r4, sys_cpu_mchk_not_retryable



	//+
	// Look for retryable cases
	// In this segment:
	//	r5<0> = 1 means retryable
	//	r6 - holds the mchk code
	//	r4 and r14 are available for scratch
	//
	//-


	// Within the chip, the retryable cases are Istream errors
	lda	r4, 3(r31)
	sll	r4, icperr_stat_v_dpe, r4
	and	r1, r4, r4
	cmovne	r4, 1, r5				// Retryable if just Icache parity error


	lda	r4, 0x7f8(r31)
	and	r10, r4, r4				// Isolate the Scache Data Parity Error bits
	srl	r10, sc_stat_v_cbox_cmd, r14
	and	r14, 0x1f, r14				// Isolate Scache Command field
	subq	r14, 1, r14				// Scache Iread command = 1
	cmovne	r4, 1, r4				// r4 = 1 if Scache data parity error bit set
	cmovne	r14, 0, r4				// r4 = 1 if Scache PE and Iread
	bis	r4, r5, r5				// Accumulate


	bis	r31, BIT((ei_stat_v_unc_ecc_err-ei_stat_v_bc_tperr)), r4
	and	r25, r4, r4				// Isolate the Uncorrectable Error Bit
	and	r25, BIT((ei_stat_v_fil_ird-ei_stat_v_bc_tperr)), r14 // Isolate the Iread bit
	cmovne	r4, 1, r4				// r4 = 1 if uncorr error
	cmoveq	r14, 0, r4				// r4 = 1 if uncorr and Iread
	bis	r4, r5, r5				// Accumulate

	mfpr	r6, pt_misc
	extwl	r6, 4, r6				// Fetch mchk code
	bic	r6, 1, r6				// Clear flag from interrupt flow
	cmovne	r5, mchk_c_retryable_ird, r6		// Set mchk code 



	// In the system, the retryable cases are ...
	// (code here handles beh model read NXM)

#if beh_model != 0        
//	.if ne beh_model
	ldah	r4, 0xC000(r31)			// Get base of demon space
	lda	r4, 0x550(r4)			// Add NXM demon flag offset
	
	ldqp	r4, 0(r4)			// Read the demon register
	lda	r14, mchk_c_read_nxm(r31) 
	cmovlbs	r4, r14, r6			// Set mchk code if read NXM
	cmovlbs	r4, 1, r4			
	bis	r4, r5, r5			// Accumulate retry bit
#endif


	//+
	// Write the logout frame
	//
	// Current state:
	//	r0	- fill_syn
	//	r1	- icperr_stat
	//	r4	- available
	// 	r5<0>  	- retry flag
	//	r6     	- mchk code
	//	r8	- dcperr_stat
	//	r9	- sc_addr
	//	r10	- sc_stat
	//	r12	- ei_addr
	//	r13	- bc_tag_addr
	//	r14	- available
	//	r25	- ei_stat (shifted)
	//	pt0	- saved r0
	//	pt1	- saved	r1
	//	pt4	- saved r4
	//	pt5	- saved r5
	//	pt6	- saved r6
	//	pt10	- saved exc_addr
	//
	//-

sys_mchk_write_logout_frame:
	// Get base of the logout area.  
	GET_IMPURE(r14)				 // addr of per-cpu impure area
	GET_ADDR(r14,pal_logout_area+mchk_mchk_base,r14)

	// Write the first 2 quadwords of the logout area:
	
	sll	r5, 63, r5				// Move retry flag to bit 63
	lda	r4, mchk_size(r5)			// Combine retry flag and frame size
	stqp	r4, mchk_flag(r14)			// store flag/frame size
	lda	r4, mchk_sys_base(r31)			// sys offset
	sll	r4, 32, r4
	lda	r4, mchk_cpu_base(r4)			// cpu offset
	stqp	r4, mchk_offsets(r14)			// store sys offset/cpu offset into logout frame

	//+
	// Write the mchk code to the logout area
	// Write error IPRs already fetched to the logout area
	// Restore some GPRs from PALtemps
	//-

	mfpr	r5, pt5
	stqp	r6, mchk_mchk_code(r14)
	mfpr	r4, pt4
	stqp	r1, mchk_ic_perr_stat(r14)
	mfpr	r6, pt6
	stqp	r8, mchk_dc_perr_stat(r14)
	mfpr	r1, pt1
	stqp	r9, mchk_sc_addr(r14)		
	stqp	r10, mchk_sc_stat(r14)		
	stqp	r12, mchk_ei_addr(r14)
	stqp	r13, mchk_bc_tag_addr(r14)
	stqp	r0,  mchk_fill_syn(r14)
	mfpr	r0, pt0
	sll	r25, ei_stat_v_bc_tperr, r25		// Move EI_STAT status bits back to expected position
	// retrieve lower 28 bits again from ei_stat and restore before storing to logout frame
	ldah    r13, 0xfff0(r31)
	zapnot  r13, 0x1f, r13
	ldqp    r13, ei_stat(r13)
	sll     r13, 64-ei_stat_v_bc_tperr, r13
	srl     r13, 64-ei_stat_v_bc_tperr, r13
	or      r25, r13, r25
	stqp	r25, mchk_ei_stat(r14)

        


	//+
	// complete the CPU-specific part of the logout frame
	//-

#ifndef SIMOS
        // cant' assemble.Where is the macro ?        
	mchk_logout	mm_stat
	mchk_logout	va			// Unlocks VA and MM_STAT
	mchk_logout	isr
	mchk_logout	icsr
	mchk_logout	pal_base
	mchk_logout	exc_mask
	mchk_logout	exc_sum
#endif

	ldah	r13, 0xfff0(r31)
	zap	r13, 0xE0, r13			// Get Cbox IPR base
	ldqp	r13, ld_lock(r13)		// Get ld_lock IPR
	stqp	r13, mchk_ld_lock(r14)		// and stash it in the frame

	//+
	// complete the PAL-specific part of the logout frame
	//-
#ifdef vms
	t = 0		
	  .repeat 24
	  pt_mchk_logout \t
	  t = t + 1
	  .endr
#endif
#ifndef SIMOS
        //can't assemble ?
        pt_mchk_logout 0
        pt_mchk_logout 1
        pt_mchk_logout 2
        pt_mchk_logout 3
        pt_mchk_logout 4
        pt_mchk_logout 5
        pt_mchk_logout 6
        pt_mchk_logout 7
        pt_mchk_logout 8
        pt_mchk_logout 9
        pt_mchk_logout 10
        pt_mchk_logout 11
        pt_mchk_logout 12
        pt_mchk_logout 13
        pt_mchk_logout 14
        pt_mchk_logout 15
        pt_mchk_logout 16
        pt_mchk_logout 17
        pt_mchk_logout 18
        pt_mchk_logout 19
        pt_mchk_logout 20
        pt_mchk_logout 21
        pt_mchk_logout 22
        pt_mchk_logout 23
#endif      

        
	//+
	// Log system specific info here
	//-

#if alpha_fw != 0        
//	.if ne alpha_fw
storeTLEP_:
	lda	r13, 0xffc4(r31)		// Get GBUS$MISCR address
	sll	r13, 24, r13
	ldqp	r13, 0(r13)			// Read GBUS$MISCR 
	sll	r13, 16, r13			// shift up to proper field
	mfpr	r8, pt_whami			// get our node id
	extbl	r8, 1, r8			// shift to bit 0
	or	r13, r8, r13			// merge MISCR and WHAMI
	stlp	r13, mchk$gbus(r14)		// write to logout area
	srl	r8, 1, r8			// shift off cpu number

	Get_TLSB_Node_Address r8,r13		// compute our nodespace address

	OSFmchk_TLEPstore	tldev, tlsb=1
	OSFmchk_TLEPstore	tlber, tlsb=1, clr=1
	OSFmchk_TLEPstore	tlcnr, tlsb=1
	OSFmchk_TLEPstore	tlvid, tlsb=1
	OSFmchk_TLEPstore	tlesr0, tlsb=1, clr=1
	OSFmchk_TLEPstore	tlesr1, tlsb=1, clr=1
	OSFmchk_TLEPstore	tlesr2, tlsb=1, clr=1
	OSFmchk_TLEPstore	tlesr3, tlsb=1, clr=1
	OSFmchk_TLEPstore	tlmodconfig
	OSFmchk_TLEPstore	tlepaerr, clr=1
	OSFmchk_TLEPstore	tlepderr, clr=1
	OSFmchk_TLEPstore	tlepmerr, clr=1
	OSFmchk_TLEPstore	tlintrmask0
	OSFmchk_TLEPstore	tlintrmask1
	OSFmchk_TLEPstore	tlintrsum0
	OSFmchk_TLEPstore	tlintrsum1
	OSFmchk_TLEPstore	tlep_vmg
//	.endc
#endif  /*alpha_fw != 0 */
	// Unlock IPRs
	lda	r8, (BIT(dcperr_stat_v_lock)|BIT(dcperr_stat_v_seo))(r31)
	mtpr	r8, dcperr_stat			// Clear Dcache parity error status

	lda	r8, (BIT(icperr_stat_v_dpe)|BIT(icperr_stat_v_tpe)|BIT(icperr_stat_v_tmr))(r31)
	mtpr	r8, icperr_stat			// Clear Icache parity error & timeout status

1:	ldqp	r8, mchk_ic_perr_stat(r14)	// get ICPERR_STAT value
	GET_ADDR(r0,0x1800,r31)		// get ICPERR_STAT value
	and	r0, r8, r0			// compare 
	beq	r0, 2f				// check next case if nothing set
	lda	r0, mchk_c_retryable_ird(r31)	// set new MCHK code
	br	r31, do_670			// setup new vector

2:	ldqp	r8, mchk_dc_perr_stat(r14)	// get DCPERR_STAT value
	GET_ADDR(r0,0x3f,r31)			// get DCPERR_STAT value
	and	r0, r8, r0			// compare 
	beq	r0, 3f				// check next case if nothing set
	lda	r0, mchk_c_dcperr(r31)		// set new MCHK code
	br	r31, do_670			// setup new vector

3:	ldqp	r8, mchk_sc_stat(r14)		// get SC_STAT value
	GET_ADDR(r0,0x107ff,r31)		// get SC_STAT value
	and	r0, r8, r0			// compare 
	beq	r0, 4f				// check next case if nothing set
	lda	r0, mchk_c_scperr(r31)		// set new MCHK code
	br	r31, do_670			// setup new vector

4:	ldqp	r8, mchk_ei_stat(r14)		// get EI_STAT value
	GET_ADDR(r0,0x30000000,r31)		// get EI_STAT value
	and	r0, r8, r0			// compare 
	beq	r0, 5f				// check next case if nothing set
	lda	r0, mchk_c_bcperr(r31)		// set new MCHK code
	br	r31, do_670			// setup new vector

5:	ldlp	r8, mchk_tlber(r14)		// get TLBER value
	GET_ADDR(r0,0xfe01,r31)	        	// get high TLBER mask value
	sll	r0, 16, r0			// shift into proper position
	GET_ADDR(r1,0x03ff,r31)		        // get low TLBER mask value
	or	r0, r1, r0			// merge mask values
	and	r0, r8, r0			// compare 
	beq	r0, 6f				// check next case if nothing set
	GET_ADDR(r0, 0xfff0, r31)		// set new MCHK code
	br	r31, do_660			// setup new vector

6:	ldlp	r8, mchk_tlepaerr(r14)		// get TLEPAERR value
	GET_ADDR(r0,0xff7f,r31) 		// get TLEPAERR mask value
	and	r0, r8, r0			// compare 
	beq	r0, 7f				// check next case if nothing set
	GET_ADDR(r0, 0xfffa, r31)		// set new MCHK code
	br	r31, do_660			// setup new vector

7:	ldlp	r8, mchk_tlepderr(r14)		// get TLEPDERR value
	GET_ADDR(r0,0x7,r31)			// get TLEPDERR mask value
	and	r0, r8, r0			// compare 
	beq	r0, 8f				// check next case if nothing set
	GET_ADDR(r0, 0xfffb, r31)		// set new MCHK code
	br	r31, do_660			// setup new vector

8:	ldlp	r8, mchk_tlepmerr(r14)		// get TLEPMERR value
	GET_ADDR(r0,0x3f,r31)			// get TLEPMERR mask value
	and	r0, r8, r0			// compare 
	beq	r0, 9f				// check next case if nothing set
	GET_ADDR(r0, 0xfffc, r31)		// set new MCHK code
	br	r31, do_660			// setup new vector

9:	ldqp	r8, mchk_ei_stat(r14)		// get EI_STAT value
	GET_ADDR(r0,0xb,r31)			// get EI_STAT mask value
	sll	r0, 32, r0			// shift to upper lw
	and	r0, r8, r0			// compare 
	beq	r0, 1f				// check next case if nothing set
	GET_ADDR(r0,0xfffd,r31) 		// set new MCHK code
	br	r31, do_660			// setup new vector

1:	ldlp	r8, mchk_tlepaerr(r14)		// get TLEPAERR value
	GET_ADDR(r0,0x80,r31)			// get TLEPAERR mask value
	and	r0, r8, r0			// compare 
	beq	r0, cont_logout_frame		// check next case if nothing set
	GET_ADDR(r0, 0xfffe, r31)		// set new MCHK code
	br	r31, do_660			// setup new vector

do_670:	lda	r8, scb_v_procmchk(r31)		// SCB vector
	br	r31, do_6x0_cont
do_660:	lda	r8, scb_v_sysmchk(r31)		// SCB vector
do_6x0_cont:
	sll	r8, 16, r8			// shift to proper position
	mfpr	r1, pt_misc			// fetch current pt_misc
	GET_ADDR(r4,0xffff, r31)		// mask for vector field
	sll	r4, 16, r4			// shift to proper position
	bic	r1, r4, r1			// clear out old vector field
	or	r1, r8, r1			// merge in new vector
	mtpr	r1, pt_misc			// save new vector field
	stlp	r0, mchk_mchk_code(r14)		// save new mchk code

cont_logout_frame:
	// Restore some GPRs from PALtemps
	mfpr	r0, pt0
	mfpr	r1, pt1
	mfpr	r4, pt4

	mfpr	r12, pt10			// fetch original PC
	blbs	r12, sys_machine_check_while_in_pal	// MCHK halt if machine check in pal

//XXXbugnion        pvc_jsr armc, bsr=1
        bsr     r12, sys_arith_and_mchk     	// go check for and deal with arith trap

	mtpr	r31, exc_sum			// Clear Exception Summary

	mfpr	r25, pt10			// write exc_addr after arith_and_mchk to pickup new pc
	stqp	r25, mchk_exc_addr(r14)

	//+
	// Set up the km trap
	//-

        
sys_post_mchk_trap:
	mfpr	r25, pt_misc		// Check for flag from mchk interrupt
	extwl	r25, 4, r25
	blbs	r25, sys_mchk_stack_done // Stack from already pushed if from interrupt flow
	
	bis	r14, r31, r12		// stash pointer to logout area
	mfpr	r14, pt10		// get exc_addr

	sll	r11, 63-3, r25		// get mode to msb
	bge	r25, 3f	

	mtpr	r31, dtb_cm
	mtpr	r31, ev5__ps

	mtpr	r30, pt_usp		// save user stack
	mfpr	r30, pt_ksp

3:	 
	lda	sp, 0-osfsf_c_size(sp)	// allocate stack space 	
	nop

	stq	r18, osfsf_a2(sp) 	// a2
	stq	r11, osfsf_ps(sp)	// save ps

	stq	r14, osfsf_pc(sp)	// save pc
 	mfpr	r25, pt_entint		// get the VA of the interrupt routine

	stq	r16, osfsf_a0(sp)	// a0
	lda	r16, osfint_c_mchk(r31)	// flag as mchk in a0

	stq	r17, osfsf_a1(sp)	// a1
	mfpr	r17, pt_misc		// get vector

	stq	r29, osfsf_gp(sp) 	// old gp
	mtpr	r25, exc_addr		// 

	or	r31, 7, r11		// get new ps (km, high ipl)
	subq	r31, 1, r18		// get a -1

	extwl	r17, 2, r17		// a1 <- interrupt vector
	bis	r31, ipl_machine_check, r25

	mtpr	r25, ipl		// Set internal ipl
	srl    	r18, 42, r18          	// shift off low bits of kseg addr

	sll    	r18, 42, r18          	// shift back into position
	mfpr	r29, pt_kgp		// get the kern r29

        or    	r12, r18, r18          	// EV4 algorithm - pass pointer to mchk frame as kseg address
	hw_rei_spe			// out to interrupt dispatch routine


	//+
	// The stack is pushed.  Load up a0,a1,a2 and vector via entInt
	//
	//-
	ALIGN_BRANCH
sys_mchk_stack_done:
	lda	r16, osfint_c_mchk(r31)	// flag as mchk/crd in a0
	lda	r17, scb_v_sysmchk(r31) // a1 <- interrupt vector

        subq    r31, 1, r18            // get a -1
	mfpr	r25, pt_entInt

        srl     r18, 42, r18           // shift off low bits of kseg addr
	mtpr	r25, exc_addr		// load interrupt vector

        sll     r18, 42, r18           // shift back into position
        or    	r14, r18, r18           // EV4 algorithm - pass pointer to mchk frame as kseg address
	
	hw_rei_spe			// done


	ALIGN_BRANCH
sys_cpu_mchk_not_retryable:
	mfpr	r6, pt_misc
	extwl	r6, 4, r6				// Fetch mchk code
	br	r31,  sys_mchk_write_logout_frame	//
	


//+
//sys$double_machine_check - a machine check was started, but MCES<MCHK> was
//	already set.  We will now double machine check halt.
//
//	pt0 - old R0
//
//+
        
EXPORT(sys_double_machine_check)
#ifndef SIMOS
        pvc$jsr updpcb, bsr=1
        bsr    r0, pal_update_pcb       // update the pcb
#endif
	lda	r0, hlt_c_dbl_mchk(r31)
	br	r31, sys_enter_console

//+
//sys$machine_check_while_in_pal - a machine check was started, exc_addr points to
//	a PAL PC.  We will now machine check halt.
//
//	pt0 - old R0
//
//+
sys_machine_check_while_in_pal:
	stqp	r12, mchk_exc_addr(r14)		// exc_addr has not yet been written

#ifndef SIMOS
        pvc$jsr updpcb, bsr=1
        bsr    r0, pal_update_pcb       // update the pcb
#endif
	lda	r0, hlt_c_mchk_from_pal(r31)
	br	r31, sys_enter_console


//ARITH and MCHK
//  Check for arithmetic errors and build trap frame,
//  but don't post the trap.
//  on entry:
//	pt10 - exc_addr
//	r12  - return address
//	r14  - logout frame pointer
//	r13 - available
//	r8,r9,r10 - available except across stq's
//	pt0,1,6 - available
//
//  on exit:
//	pt10 - new exc_addr
//	r17 = exc_mask
//	r16 = exc_sum
//	r14 - logout frame pointer
//
	ALIGN_BRANCH
sys_arith_and_mchk:
	mfpr	r13, ev5__exc_sum
	srl	r13, exc_sum_v_swc, r13
	bne	r13, handle_arith_and_mchk

// XXX bugnion        pvc$jsr armc, bsr=1, dest=1
        ret     r31, (r12)              // return if no outstanding arithmetic error

handle_arith_and_mchk:
        mtpr    r31, ev5__dtb_cm        // Set Mbox current mode to kernel -
                                        //     no virt ref for next 2 cycles
	mtpr	r14, pt0	

	mtpr	r1, pt1			// get a scratch reg
	and     r11, osfps_m_mode, r1 // get mode bit

	bis     r11, r31, r25           // save ps
        beq     r1, 1f                 // if zero we are in kern now

        bis     r31, r31, r25           // set the new ps
        mtpr    r30, pt_usp             // save user stack

        mfpr    r30, pt_ksp             // get kern stack
1: 
        mfpr    r14, exc_addr           // get pc into r14 in case stack writes fault

	lda     sp, 0-osfsf_c_size(sp)  // allocate stack space
        mtpr    r31, ev5__ps            // Set Ibox current mode to kernel

        mfpr    r1, pt_entArith
        stq     r14, osfsf_pc(sp)       // save pc

        stq     r17, osfsf_a1(sp)
        mfpr    r17, ev5__exc_mask      // Get exception register mask IPR - no mtpr exc_sum in next cycle

        stq     r29, osfsf_gp(sp)
        stq     r16, osfsf_a0(sp)       // save regs

	bis	r13, r31, r16		// move exc_sum to r16
        stq     r18, osfsf_a2(sp)

        stq     r11, osfsf_ps(sp)       // save ps
        mfpr    r29, pt_kgp             // get the kern gp

	mfpr	r14, pt0		// restore logout frame pointer from pt0
        bis     r25, r31, r11           // set new ps

        mtpr    r1, pt10		// Set new PC
	mfpr	r1, pt1

// XXX bugnion        pvc$jsr armc, bsr=1, dest=1
        ret     r31, (r12)              // return if no outstanding arithmetic error



// .sbttl	"SYS$ENTER_CONSOLE - Common PALcode for ENTERING console"

	ALIGN_BLOCK

// SYS$enter_console
//
// Entry:
//	Entered when PAL wants to enter the console.
//	usually as the result of a HALT instruction or button,
//	or catastrophic error.
//
// Regs on entry...
//
//	R0 	= halt code
//	pt0	<- r0
//
// Function:
//
//	Save all readable machine state, and "call" the console
//	
// Returns:
//
//
// Notes:
//
//	In these routines, once the save state routine has been executed,
//	the remainder of the registers become scratchable, as the only
//	"valid" copy of them is the "saved" copy.
//
//	Any registers or PTs that are modified before calling the save 
//	routine will have there data lost. The code below will save all
//	state, but will loose pt 0,4,5.
//	
//-

EXPORT(sys_enter_console)
	mtpr	r1, pt4
	mtpr	r3, pt5
#ifdef SIMOS
        subq	r31, 1, r1
	sll	r1, 42, r1
	ldah	r1, 1(r1)
#else /* SIMOS */
        lda	r3, pal_enter_console_ptr(r31) //find stored vector
	ldqp	r1, 0(r3)
#endif /* SIMOS */

#ifdef SIMOS
        /* taken from scrmax, seems like the obvious thing to do */
        mtpr	r1, exc_addr
	mfpr	r1, pt4
	mfpr	r3, pt5
	STALL
	STALL
	hw_rei_stall
#else        
        pvc$violate	1007
	jmp	r31, (r1)		// off to common routine
#endif
        

// .sbttl	"SYS$EXIT_CONSOLE - Common PALcode for ENTERING console"
//+
// sys$exit_console
//
// Entry:
//	Entered when console wants to reenter PAL.
//	usually as the result of a CONTINUE.
//
//
// Regs' on entry...
//
//
// Function:
//
//	Restore all readable machine state, and return to user code.
//	
//
//	
//-
	ALIGN_BLOCK
sys_exit_console:
	//Disable physical mode:
#if enable_physical_console != 0        
//    .if ne enable_physical_console
	mfpr	r25, pt_ptbr
	bic	r25, 1, r25		// clear physical console flag
	mtpr	r25, pt_ptbr
#endif

	GET_IMPURE(r1)

	// clear lock and intr_flags prior to leaving console
	rc	r31			// clear intr_flag
	// lock flag cleared by restore_state
#ifndef SIMOS
        pvc$jsr	rststa, bsr=1
	bsr	r3, pal_restore_state	// go restore all state
					// note, R1 and R3 are NOT restored
					// by restore_state.
#endif
	// TB's have been flushed

	ldqp	r3, (cns_gpr+(8*3))(r1)		// restore r3
	ldqp	r1, (cns_gpr+8)(r1)		// restore r1
	hw_rei_stall				// back to user

#if turbo_pcia_intr_fix != 0        
// .if ne	turbo_pcia_intr_fix
check_pcia_intr:
	mfpr	r14, pt14		// fetch saved PCIA interrupt info
	beq	r14, check_done		// don't bother checking if no info
	mfpr	r13, ipl		// check the current IPL
	bic	r13, 3, r25		// isolate ipl<5:2>
	cmpeq	r25, 0x14, r25		// is it an I/O interrupt?
	beq	r25, check_done		// no, return
	and	r13, 3, r25		// get I/O interrupt index
	extbl	r14, r25, r13		// extract info for this interrupt
	beq	r13, check_done		// if no info, return

					// This is an RTI from a PCIA interrupt
	lda	r12, 1(r31)		// get initial bit mask
	sll	r12, r25, r25		// shift to select interrupt index
	zap	r14, r25, r14		// clear out info from this interrupt
	mtpr	r14, pt14		//  and save it

	and	r13, 3, r25		// isolate HPC field
	subq	r25, 1, r25		// subtract 1 to get HPC number
	srl	r13, 2, r13		// generate base register address
	sll	r13, 6, r13		// get slot/hose address bits
	lda	r13, 0x38(r13)		// insert other high bits
	sll	r13, 28, r13		// shift high bits into position

					// Read the IPROGx register
	sll	r25, 21, r14		// HPC address bit position
	or	r13, r14, r14		// add in upper bits
	lda	r14, 0x400(r14)		// add in lower bits
	ldqp	r14, 0(r14)		// read IPROG 
	srl	r14, 4, r12		// check the In Progress bit
	blbc	r12, 1f 		// skip if none in progress
	and	r14, 0xf, r14		// isolate interrupt source
	lda	r12, 1(r31)		// make initial mask
	sll	r12, r14, r14		// shift to make new intr source mask
	br	r31, 2f
					// Write the SMPLIRQx register
1:	or	r31, r31, r14		// default interrupt source mask
2:	GET_ADDR(r12, 0xffff, r31)	// default SMPLIRQx data
	bic	r12, r14, r12		// clear any interrupts in progres
//orig  lda	r14, <0xbffc@-2>(r31)	// get register address bits
        lda     r14,(0xbffc>>2)(r31)

        	sll	r14, 10, r14		// shift into position
	or	r14, r13, r14		// add in upper bits
	sll	r25, 8, r25		// shift HPC number into position
	or	r14, r25, r14		// add in lower bits
	stqp	r12, 0(r14)		// write SMPLIRQx register
	mb
	ldqp	r12, 0(r14)		// read it back
	bis	r12, r12, r12		// touch register to insure completion
	
check_done:				// do these now and return
 	lda	r25, osfsf_c_size(sp)	// get updated sp
	bis	r25, r31, r14		// touch r14,r25 to stall mf exc_addr
	br	r31, pcia_check_return
#endif


// .sbttl KLUDGE_INITIAL_PCBB - PCB for Boot use only

        ALIGN_128

kludge_initial_pcbb:			// PCB is 128 bytes long
//	.repeat 16
//	.quad   0
//	.endr
        
        nop
        nop
        nop
        nop

        nop
        nop
        nop
        nop
        
        nop
        nop
        nop
        nop
        
        nop
        nop
        nop
        nop                        

// .sbttl "SET_SC_BC_CTL subroutine"
//
// Subroutine to set the SC_CTL, BC_CONFIG, and BC_CTL registers and flush the Scache
// There must be no outstanding memory references -- istream or dstream -- when
// these registers are written.  EV5 prefetcher is difficult to turn off.  So,
// this routine needs to be exactly 32 instructions long// the final jmp must
// be in the last octaword of a page (prefetcher doesn't go across page)
//  
//
// Register expecations:
//	r0	base address of CBOX iprs
//       r5      value to set sc_ctl to (flush bit is added in)
//       r6      value to set bc_ctl to
//	r7	value to set bc_config to 
//	r10	return address
// 	r19     old sc_ctl value
// 	r20	old value of bc_ctl
//	r21	old value of bc_config
//	r23	flush scache flag
// Register usage:
//       r17     sc_ctl with flush bit cleared
//	r22	loop address
//
//
#ifndef SIMOS        
	align_page <32*4>               // puts start of routine at next page boundary minus 32 longwords.
#endif
        
set_sc_bc_ctl:

#ifndef SIMOS        
	br	r22, sc_ctl_loop	//this branch must be in the same 4 instruction block as it's dest
sc_ctl_loop:				
// XXX bugnion 	pvc$jsr	scloop, dest=1
	mb
	mb

	bis 	r5, r23, r5		//r5 <- same sc_ctl with flush bit set (if flag set in r23)

	stqp	r19, ev5__sc_ctl(r0)	// write sc_ctl
	stqp	r20, ev5__bc_ctl(r0)	// write bc_ctl
	bis	r31, r6, r20		// update r20 with new bc_ctl for 2nd time through loop
        stqp    r21, bc_config(r0)  	// write bc_config register
	bis	r31, r7, r21		// update r21 with new bc_config for 2nd time through loop

	bic 	r19, BIT(sc_ctl_v_sc_flush), r17	//r17 <- same sc_ctl without flush bit set
							//NOTE: only works because flush bit is in lower 16 bits

	wmb				// don't merge with other writes
	stqp	r17, ev5__sc_ctl(r0)	// write sc_ctl without flush bit
	ldqp	r17, ev5__sc_ctl(r0)	// read sc_ctl
	bis	r17, r17, r17		// stall until the data comes back
	bis	r31, r5, r19		// update r19 with new sc_ctl for 2nd time through loop

	// fill with requisite number of nops (unops ok) to make exactly 32 instructions in loop
	t = 0		
	  .repeat 15
	  unop
	  t = t + 1
	  .endr
        $opdef  mnemonic= myjmp, -
                format= <custom=iregister, iregister, branch_offset>, -
                encoding= <26:31=0x1A, 21:25=%OP1,16:20=%OP2,14:15=0x00,0:13=%op3>

// XXXbugnion 	pvc$jsr	scloop
	myjmp	r22,r22,sc_ctl_loop	// first time, jump to sc_ctl_loop (hint will cause prefetcher to go to loop instead
					//       of straight) // r22 gets sc_ctl_done
					// 2nd time, code continues at sc_ctl_done (I hope)
sc_ctl_done:
// XXX bugnion 	pvc$jsr	scloop, dest=1
// XXX bugnion 	pvc$jsr scbcctl
#endif /*SIMOS*/        
	ret	r31, (r10)		// return to where we came from


.end