1 files changed, 0 insertions, 133 deletions
diff --git a/arch/arm/include/asm/arch-tegra/warmboot.h b/arch/arm/include/asm/arch-tegra/warmboot.h
deleted file mode 100644
index 3f02073..0000000
--- a/arch/arm/include/asm/arch-tegra/warmboot.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010, 2011
- * NVIDIA Corporation <www.nvidia.com>
- */
-
-#ifndef _WARM_BOOT_H_
-#define _WARM_BOOT_H_
-
-#define STRAP_OPT_A_RAM_CODE_SHIFT	4
-#define STRAP_OPT_A_RAM_CODE_MASK	(0xf << STRAP_OPT_A_RAM_CODE_SHIFT)
-
-/* Defines the supported operating modes */
-enum fuse_operating_mode {
-	MODE_PRODUCTION = 3,
-	MODE_UNDEFINED,
-};
-
-/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
-enum {
-	HASH_LENGTH = 4
-};
-
-/* Defines the storage for a hash value (128 bits) */
-struct hash {
-	u32 hash[HASH_LENGTH];
-};
-
-/*
- * Defines the code header information for the boot rom.
- *
- * The code immediately follows the code header.
- *
- * Note that the code header needs to be 16 bytes aligned to preserve
- * the alignment of relevant data for hash and decryption computations without
- * requiring extra copies to temporary memory areas.
- */
-struct wb_header {
-	u32 length_insecure;	/* length of the code header */
-	u32 reserved[3];
-	struct hash hash;	/* hash of header+code, starts next field*/
-	struct hash random_aes_block;	/* a data block to aid security. */
-	u32 length_secure;	/* length of the code header */
-	u32 destination;	/* destination address to put the wb code */
-	u32 entry_point;	/* execution address of the wb code */
-	u32 code_length;	/* length of the code */
-};
-
-/*
- * The warm boot code needs direct access to these registers since it runs in
- * SRAM and cannot call other U-Boot code.
- */
-union osc_ctrl_reg {
-	struct {
-		u32 xoe:1;
-		u32 xobp:1;
-		u32 reserved0:2;
-		u32 xofs:6;
-		u32 reserved1:2;
-		u32 xods:5;
-		u32 reserved2:3;
-		u32 oscfi_spare:8;
-		u32 pll_ref_div:2;
-		u32 osc_freq:2;
-	};
-	u32 word;
-};
-
-union pllx_base_reg {
-	struct {
-		u32 divm:5;
-		u32 reserved0:3;
-		u32 divn:10;
-		u32 reserved1:2;
-		u32 divp:3;
-		u32 reserved2:4;
-		u32 lock:1;
-		u32 reserved3:1;
-		u32 ref_dis:1;
-		u32 enable:1;
-		u32 bypass:1;
-	};
-	u32 word;
-};
-
-union pllx_misc_reg {
-	struct {
-		u32 vcocon:4;
-		u32 lfcon:4;
-		u32 cpcon:4;
-		u32 lock_sel:6;
-		u32 reserved0:1;
-		u32 lock_enable:1;
-		u32 reserved1:1;
-		u32 dccon:1;
-		u32 pts:2;
-		u32 reserved2:6;
-		u32 out1_div_byp:1;
-		u32 out1_inv_clk:1;
-	};
-	u32 word;
-};
-
-/*
- * TODO: This register is not documented in the TRM yet. We could move this
- * into the EMC and give it a proper interface, but not while it is
- * undocumented.
- */
-union scratch3_reg {
-	struct {
-		u32 pllx_base_divm:5;
-		u32 pllx_base_divn:10;
-		u32 pllx_base_divp:3;
-		u32 pllx_misc_lfcon:4;
-		u32 pllx_misc_cpcon:4;
-	};
-	u32 word;
-};
-
-
-/**
- * Save warmboot memory settings for a later resume
- *
- * @return 0 if ok, -1 on error
- */
-int warmboot_save_sdram_params(void);
-
-int warmboot_prepare_code(u32 seg_address, u32 seg_length);
-int sign_data_block(u8 *source, u32 length, u8 *signature);
-void wb_start(void);	/* Start of WB assembly code */
-void wb_end(void);	/* End of WB assembly code */
-
-#endif