diff options
Diffstat (limited to 'include/configs/M5275EVB.h')
| -rw-r--r-- | include/configs/M5275EVB.h | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h deleted file mode 100644 index 682e2e3..0000000 --- a/include/configs/M5275EVB.h +++ /dev/null @@ -1,196 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Motorola MC5275EVB board. - * - * By Arthur Shipkowski <art@videon-central.com> - * Copyright (C) 2005 Videon Central, Inc. - * - * Based off of M5272C3 board code by Josef Baumgartner - * <josef.baumgartner@telex.de> - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M5275EVB_H -#define _M5275EVB_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MCFTMR - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) - -/* Configuration for environment - * Environment is embedded in u-boot in the second sector of the flash - */ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#else -#define CONFIG_ENV_ADDR 0xffe04000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#endif - -#define LDS_BOARD_TEXT \ - . = DEFINED(env_offset) ? env_offset : .; \ - env/embedded.o(.text); - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* Available command configuration */ - -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FEC0_PINMUX 0 -#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -#define CONFIG_SYS_FEC1_PINMUX 0 -#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE -#define MCFFEC_TOUT_LOOP 50000 -#define CONFIG_HAS_ETH1 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -#ifndef CONFIG_SYS_DISCOVER_PHY -#define FECDUPLEX FULL -#define FECSPEED _100BASET -#else -#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -#endif -#endif -#endif - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR -#define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) -#define CONFIG_SYS_I2C_PINMUX_SET (0x000F) - -#define CONFIG_SYS_LOAD_ADDR 0x800000 - -#define CONFIG_BOOTCOMMAND "bootm ffe40000" -#define CONFIG_SYS_MEMTEST_START 0x400 -#define CONFIG_SYS_MEMTEST_END 0x380000 - -#ifdef CONFIG_MCFFEC -# define CONFIG_NET_RETRY_COUNT 5 -# define CONFIG_OVERWRITE_ETHADDR_ONCE -#endif /* FEC_ENET */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "loadaddr=10000\0" \ - "uboot=u-boot.bin\0" \ - "load=tftp ${loadaddr} ${uboot}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off ffe00000 ffe3ffff;" \ - "era ffe00000 ffe3ffff;" \ - "cp.b ${loadaddr} ffe00000 ${filesize};"\ - "save\0" \ - "" - -#define CONFIG_SYS_CLK 150000000 - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -#define CONFIG_SYS_MBAR 0x40000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE - -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif - -#define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) -#define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 - -#define CONFIG_SYS_FLASH_SIZE 0x200000 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ - CF_CACR_DISD | CF_CACR_INVI | \ - CF_CACR_CEIB | CF_CACR_DCM | \ - CF_CACR_EUSP) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 - -#define CONFIG_SYS_CS1_BASE 0x30000000 -#define CONFIG_SYS_CS1_CTRL 0x00001900 -#define CONFIG_SYS_CS1_MASK 0x00070001 - -/*----------------------------------------------------------------------- - * Port configuration - */ -#define CONFIG_SYS_FECI2C 0x0FA0 - -#endif /* _M5275EVB_H */ |