diff options
Diffstat (limited to 'include/configs/M5475EVB.h')
| -rw-r--r-- | include/configs/M5475EVB.h | 256 |
1 files changed, 0 insertions, 256 deletions
diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h deleted file mode 100644 index 7cc09ab..0000000 --- a/include/configs/M5475EVB.h +++ /dev/null @@ -1,256 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the Freescale MCF5475 board. - * - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef _M5475EVB_H -#define _M5475EVB_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) - -#undef CONFIG_HW_WATCHDOG -#define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ - -#define CONFIG_SLTTMR - -#define CONFIG_FSLDMAFEC -#ifdef CONFIG_FSLDMAFEC -# define CONFIG_MII_INIT 1 -# define CONFIG_HAS_ETH1 - -# define CONFIG_SYS_DMA_USE_INTSRAM 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 32 -# define CONFIG_SYS_TX_ETH_BUFFER 48 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define CONFIG_SYS_FEC1_PINMUX 0 -# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE - -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ - -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 - -#endif - -#ifdef CONFIG_CMD_USB -# define CONFIG_USB_OHCI_NEW - -# define CONFIG_PCI_OHCI - -# undef CONFIG_SYS_USB_OHCI_BOARD_INIT -# undef CONFIG_SYS_USB_OHCI_CPU_INIT -# define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -# define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" -# define CONFIG_SYS_OHCI_SWAP_REG_ACCESS -#endif - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 80000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x00008F00 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -/* PCI */ -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 - -#define CONFIG_SYS_PCI_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_SYS_PCI_IO_BUS 0x71000000 -#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_PCI_CFG_BUS 0x70000000 -#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS -#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 -#endif - -#define CONFIG_UDP_CHECKSUM - -#ifdef CONFIG_MCFFEC -# define CONFIG_IPADDR 192.162.1.2 -# define CONFIG_NETMASK 255.255.255.0 -# define CONFIG_SERVERIP 192.162.1.1 -# define CONFIG_GATEWAYIP 192.162.1.1 -#endif /* FEC_ENET */ - -#define CONFIG_HOSTNAME "M547xEVB" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "loadaddr=10000\0" \ - "u-boot=u-boot.bin\0" \ - "load=tftp ${loadaddr) ${u-boot}\0" \ - "upd=run load; run prog\0" \ - "prog=prot off bank 1;" \ - "era ff800000 ff83ffff;" \ - "cp.b ${loadaddr} ff800000 ${filesize};"\ - "save\0" \ - "" - -#define CONFIG_PRAM 512 /* 512 KB */ - -#define CONFIG_SYS_LOAD_ADDR 0x00010000 - -#define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 - -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) -#define CONFIG_SYS_INTSRAMSZ 0x8000 - -/*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 -#define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) -#define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM1_CTRL 0x21 -#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_CFG1 0x73711630 -#define CONFIG_SYS_SDRAM_CFG2 0x46770000 -#define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 -#define CONFIG_SYS_SDRAM_EMOD 0x40010000 -#define CONFIG_SYS_SDRAM_MODE 0x018D0000 -#define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA -#ifdef CONFIG_SYS_DRAMSZ1 -# define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) -#else -# define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ -#endif - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 -#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) - -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ - -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - -/* Reserve 256 kB for malloc() */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) -# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ -#ifdef CONFIG_SYS_NOR1SZ -# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -# define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } -#else -# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -# define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) -#endif -#endif - -/* Configuration for environment - * Environment is not embedded in u-boot but at offset 0x40000 on the flash. - * First time runing may have env crc error warning if there is - * no correct environment on the flash. - */ -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x10000 - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ - CF_CACR_IDCM) -#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) -#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ - CF_CACR_IEC | CF_CACR_ICINVA) -#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ - CF_CACR_DEC | CF_CACR_DDCM_P | \ - CF_CACR_DCINVA) & ~CF_CACR_ICINVA) - -/*----------------------------------------------------------------------- - * Chipselect bank definitions - */ -/* - * CS0 - NOR Flash 1, 2, 4, or 8MB - * CS1 - NOR Flash - * CS2 - Available - * CS3 - Available - * CS4 - Available - * CS5 - Available - */ -#define CONFIG_SYS_CS0_BASE 0xFF800000 -#define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) -#define CONFIG_SYS_CS0_CTRL 0x00101980 - -#ifdef CONFIG_SYS_NOR1SZ -#define CONFIG_SYS_CS1_BASE 0xE0000000 -#define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) -#define CONFIG_SYS_CS1_CTRL 0x00101D80 -#endif - -#endif /* _M5475EVB_H */ |