diff options
Diffstat (limited to 'include/configs/MCR3000.h')
-rw-r--r-- | include/configs/MCR3000.h | 110 |
1 files changed, 0 insertions, 110 deletions
diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h deleted file mode 100644 index 3c46ae0..0000000 --- a/include/configs/MCR3000.h +++ /dev/null @@ -1,110 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2010-2017 CS Systemes d'Information - * Christophe Leroy <christophe.leroy@c-s.fr> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "sdram_type=SDRAM\0" \ - "flash_type=AM29LV160DB\0" \ - "loadaddr=0x400000\0" \ - "filename=uImage.lzma\0" \ - "nfsroot=/opt/ofs\0" \ - "dhcp_ip=ip=:::::eth0:dhcp\0" \ - "console_args=console=ttyCPM0,115200N8\0" \ - "flashboot=setenv bootargs " \ - "${console_args} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "mcr3k:eth0:off;" \ - "${ofl_args}; " \ - "bootm 0x04060000 - 0x04050000\0" \ - "tftpboot=setenv bootargs " \ - "${console_args} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "mcr3k:eth0:off " \ - "${ofl_args}; " \ - "tftp ${loadaddr} ${filename};" \ - "tftp 0xf00000 mcr3000.dtb;" \ - "bootm ${loadaddr} - 0xf00000\0" \ - "netboot=dhcp ${loadaddr} ${filename};" \ - "tftp 0xf00000 mcr3000.dtb;" \ - "setenv bootargs " \ - "root=/dev/nfs rw " \ - "${console_args} " \ - "${dhcp_ip};" \ - "bootm ${loadaddr} - 0xf00000\0" \ - "nfsboot=setenv bootargs " \ - "root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \ - "${console_args} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ - "mcr3k:eth0:off;" \ - "bootm 0x04060000 - 0x04050000\0" \ - "dhcpboot=dhcp ${loadaddr} ${filename};" \ - "tftp 0xf00000 mcr3000.dtb;" \ - "setenv bootargs " \ - "${console_args} " \ - "${dhcp_ip} " \ - "${ofl_args}; " \ - "bootm ${loadaddr} - 0xf00000\0" - -#define CONFIG_IPADDR 192.168.0.3 -#define CONFIG_SERVERIP 192.168.0.1 -#define CONFIG_NETMASK 255.0.0.0 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_MEMTEST_START 0x00002000 -#define CONFIG_SYS_MEMTEST_END 0x00800000 - -#define CONFIG_SYS_LOAD_ADDR 0x200000 - -#define CONFIG_SYS_HZ 1000 - -/* Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800) -#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800) - -/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 35 -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) -#define CONFIG_SYS_MONITOR_LEN (320 << 10) -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) - -/* Environment Configuration */ - -/* environment is in FLASH */ -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_OVERWRITE 1 - -/* Ethernet configuration part */ -#define CONFIG_SYS_DISCOVER_PHY 1 -#define CONFIG_MII_INIT 1 - -/* NAND configuration part */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE 0x0C000000 - -#endif /* __CONFIG_H */ |