diff options
Diffstat (limited to 'include/configs/TQM834x.h')
| -rw-r--r-- | include/configs/TQM834x.h | 288 |
1 files changed, 0 insertions, 288 deletions
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h deleted file mode 100644 index 9bf5d9d..0000000 --- a/include/configs/TQM834x.h +++ /dev/null @@ -1,288 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - */ - -/* - * TQM8349 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -/* board pre init: do not call, nothing to do */ - -/* detect the number of flash banks */ - -/* - * DDR Setup - */ - /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define DDR_CASLAT_25 /* CASLAT set to 2.5 */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00100000 - -/* - * FLASH on the Local Bus - */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_BASE 0x80000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size in MB */ -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sectors */ - -/* - * FLASH bank number detection - */ - -/* - * When CONFIG_SYS_MAX_FLASH_BANKS_DETECT is defined, the actual number of - * Flash banks has to be determined at runtime and stored in a gloabl variable - * tqm834x_num_flash_banks. The value of CONFIG_SYS_MAX_FLASH_BANKS_DETECT is - * only used instead of CONFIG_SYS_MAX_FLASH_BANKS to allocate the array - * flash_info, and should be made sufficiently large to accomodate the number - * of banks that might actually be detected. Since most (all?) Flash related - * functions use CONFIG_SYS_MAX_FLASH_BANKS as the number of actual banks on - * the board, it is defined as tqm834x_num_flash_banks. - */ -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2 - -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ - - -/* disable remaining mappings */ -#define CONFIG_SYS_BR1_PRELIM 0x00000000 -#define CONFIG_SYS_OR1_PRELIM 0x00000000 - -#define CONFIG_SYS_BR2_PRELIM 0x00000000 -#define CONFIG_SYS_OR2_PRELIM 0x00000000 - -#define CONFIG_SYS_BR3_PRELIM 0x00000000 -#define CONFIG_SYS_OR3_PRELIM 0x00000000 - -/* - * Monitor config - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT -#else -# undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - - /* Reserve 384 kB = 3 sect. for Mon */ -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) - /* Reserve 512 kB for malloc */ -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 - -/* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32 bytes/write */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12 /* 10ms +/- 20% */ - -/* I2C RTC */ -#define CONFIG_RTC_DS1337 /* use ds1337 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* - * TSEC - */ - -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) -#define CONFIG_SYS_TSEC2_OFFSET 0x25000 -#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET) - -#if defined(CONFIG_TSEC_ENET) - -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#endif /* CONFIG_TSEC_ENET */ - -#if defined(CONFIG_PCI) - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -/* PCI1 host bridge */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x90000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_MMIO_BASE \ - (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) -#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE -#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#undef CONFIG_EEPRO100 -#define CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BASE - #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_MEM_BASE - #define PCI_IDSEL_NUMBER 0x1c /* slot0 (IDSEL) = 28 */ -#endif - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ - -#endif /* CONFIG_PCI */ - -/* - * Environment - */ -#define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) for env */ -#define CONFIG_ENV_SIZE 0x8000 /* 32K max size */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* System IO Config */ -#define CONFIG_SYS_SICRH 0 -#define CONFIG_SYS_SICRL SICRL_LDP_A - -/* PCI */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ - - /* default location for tftp and bootm */ -#define CONFIG_LOADADDR 400000 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=tqm834x\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \ - "flash_nfs_old=run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self_old=run ramargs addip addcons;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_self=run ramargs addip addcons;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs_old=tftp 400000 ${bootfile};" \ - "run nfsargs addip addcons;bootm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons; " \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=tqm834x/uImage\0" \ - "fdtfile=tqm834x/tqm834x.dtb\0" \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=600000\0" \ - "ramdisk_addr_r=800000\0" \ - "kernel_addr=800C0000\0" \ - "fdt_addr=800A0000\0" \ - "ramdisk_addr=80300000\0" \ - "u-boot=tqm834x/u-boot.bin\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "update=protect off 80000000 +${filesize};" \ - "era 80000000 +${filesize};" \ - "cp.b 200000 80000000 ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * JFFS2 partitions - */ -/* mtdparts command line support */ - -/* default mtd partition table */ -#endif /* __CONFIG_H */ |