summaryrefslogtreecommitdiff
path: root/include/configs/UCP1020.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/UCP1020.h')
-rw-r--r--include/configs/UCP1020.h883
1 files changed, 0 insertions, 883 deletions
diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h
deleted file mode 100644
index 6a01a90..0000000
--- a/include/configs/UCP1020.h
+++ /dev/null
@@ -1,883 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013-2019 Arcturus Networks, Inc.
- * https://www.arcturusnetworks.com/products/ucp1020/
- * based on include/configs/p1_p2_rdb_pc.h
- * original copyright follows:
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- */
-
-/*
- * QorIQ uCP1020-xx boards configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*** Arcturus FirmWare Environment */
-
-#define MAX_SERIAL_SIZE 15
-#define MAX_HWADDR_SIZE 17
-
-#define MAX_FWENV_ADDR 4
-
-#define FWENV_MMC 1
-#define FWENV_SPI_FLASH 2
-#define FWENV_NOR_FLASH 3
-/*
- #define FWENV_TYPE FWENV_MMC
- #define FWENV_TYPE FWENV_SPI_FLASH
-*/
-#define FWENV_TYPE FWENV_NOR_FLASH
-
-#if (FWENV_TYPE == FWENV_MMC)
-#ifndef CONFIG_SYS_MMC_ENV_DEV
-#define CONFIG_SYS_MMC_ENV_DEV 1
-#endif
-#define FWENV_ADDR1 -1
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0
-#endif
-
-#if (FWENV_TYPE == FWENV_SPI_FLASH)
-#ifndef CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_SF_DEFAULT_SPEED 1000000
-#endif
-#ifndef CONFIG_SF_DEFAULT_MODE
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE0
-#endif
-#ifndef CONFIG_SF_DEFAULT_CS
-#define CONFIG_SF_DEFAULT_CS 0
-#endif
-#ifndef CONFIG_SF_DEFAULT_BUS
-#define CONFIG_SF_DEFAULT_BUS 0
-#endif
-#define FWENV_ADDR1 (0x200 - sizeof(smac))
-#define FWENV_ADDR2 (0x400 - sizeof(smac))
-#define FWENV_ADDR3 (CONFIG_ENV_SECT_SIZE + 0x200 - sizeof(smac))
-#define FWENV_ADDR4 (CONFIG_ENV_SECT_SIZE + 0x400 - sizeof(smac))
-#define EMPY_CHAR 0xff
-#endif
-
-#if (FWENV_TYPE == FWENV_NOR_FLASH)
-#define FWENV_ADDR1 0xEC080000
-#define FWENV_ADDR2 -1
-#define FWENV_ADDR3 -1
-#define FWENV_ADDR4 -1
-#define EMPY_CHAR 0xff
-#endif
-/***********************************/
-
-#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
-#define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
-#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-
-#if defined(CONFIG_TARTGET_UCP1020T1)
-
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME "uCP1020-64EE512-0U1-XR-T1"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETHADDR 00:19:D3:FF:FF:FF
-#define CONFIG_ETH1ADDR 00:19:D3:FF:FF:FE
-#define CONFIG_ETH2ADDR 00:19:D3:FF:FF:FD
-#define CONFIG_IPADDR 10.80.41.229
-#define CONFIG_SERVERIP 10.80.41.227
-#define CONFIG_NETMASK 255.255.252.0
-#define CONFIG_ETHPRIME "eTSEC3"
-
-#define CONFIG_SYS_L2_SIZE (256 << 10)
-
-#endif
-
-#if defined(CONFIG_TARGET_UCP1020)
-
-#define CONFIG_UCP1020
-#define CONFIG_UCP1020_REV_1_3
-
-#define CONFIG_BOARDNAME_LOCAL "uCP1020-64EEE512-OU1-XR"
-
-#define CONFIG_TSEC1
-#define CONFIG_TSEC3
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETHADDR 00:06:3B:FF:FF:FF
-#define CONFIG_ETH1ADDR 00:06:3B:FF:FF:FE
-#define CONFIG_ETH2ADDR 00:06:3B:FF:FF:FD
-#define CONFIG_IPADDR 192.168.1.81
-#define CONFIG_IPADDR1 192.168.1.82
-#define CONFIG_IPADDR2 192.168.1.83
-#define CONFIG_SERVERIP 192.168.1.80
-#define CONFIG_GATEWAYIP 102.168.1.1
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_ETHPRIME "eTSEC1"
-
-#undef CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#define CONFIG_SYS_L2_SIZE (256 << 10)
-
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RAMBOOT_SPIFLASH
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
-#endif
-
-#define CONFIG_SYS_TEXT_BASE_NOR 0xeff80000
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
-#endif
-
-#ifndef CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SYS_SATA_MAX_DEVICE 2
-#define CONFIG_LBA48
-
-#define CONFIG_SYS_CLK_FREQ 66666666
-#define CONFIG_DDR_CLK_FREQ 66666666
-
-#define CONFIG_HWCONFIG
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_L2_CACHE
-#define CONFIG_BTB
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x1fffffff
-
-#define CONFIG_SYS_CCSRBAR 0xffe00000
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-
-/* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
- SPL code*/
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-/* DDR Setup */
-#define CONFIG_DDR_ECC_ENABLE
-#ifndef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_RAW_TIMING
-#define CONFIG_DDR_SPD
-#endif
-#define CONFIG_SYS_SPD_BUS_NUM 1
-
-#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M
-#define CONFIG_CHIP_SELECTS_PER_CTRL 1
-#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-
-/* Default settings for DDR3 */
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302
-#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302
-#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608
-#define CONFIG_SYS_DDR_SR_CNTR 0x00000000
-#define CONFIG_SYS_DDR_RCW_1 0x00000000
-#define CONFIG_SYS_DDR_RCW_2 0x00000000
-#ifdef CONFIG_DDR_ECC_ENABLE
-#define CONFIG_SYS_DDR_CONTROL 0xE70C0000 /* Type = DDR3 & ECC */
-#else
-#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */
-#endif
-#define CONFIG_SYS_DDR_CONTROL_2 0x04401050
-#define CONFIG_SYS_DDR_TIMING_4 0x00220001
-#define CONFIG_SYS_DDR_TIMING_5 0x03402400
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0 0x00330004
-#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846
-#define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF
-#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000
-#define CONFIG_SYS_DDR_MODE_1 0x40461520
-#define CONFIG_SYS_DDR_MODE_2 0x8000c000
-#define CONFIG_SYS_DDR_INTERVAL 0x0C300000
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-/*
- * Memory map
- *
- * 0x0000_0000 0x7fff_ffff DDR Up to 2GB cacheable
- * 0x8000_0000 0xdfff_ffff PCI Express Mem 1G non-cacheable(PCIe * 2)
- * 0xec00_0000 0xefff_ffff NOR flash Up to 64M non-cacheable CS0/1
- * 0xf8f8_0000 0xf8ff_ffff L2 SRAM Up to 256K cacheable
- * (early boot only)
- * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable
- * 0xffd0_0000 0xffd0_3fff L1 for stack 16K cacheable
- * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
- */
-
-/*
- * Local Bus Definitions
- */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */
-#define CONFIG_SYS_FLASH_BASE 0xec000000
-
-#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
- | BR_PS_16 | BR_V)
-
-#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
-
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */
-/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
-/* Size of used area in RAM */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */
-
-#define CONFIG_SYS_PMC_BASE 0xff980000
-#define CONFIG_SYS_PMC_BASE_PHYS CONFIG_SYS_PMC_BASE
-#define CONFIG_PMC_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
- BR_PS_8 | BR_V)
-#define CONFIG_PMC_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
- OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
- OR_GPCM_EAD)
-
-#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
-#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
-#ifdef CONFIG_NAND_FSL_ELBC
-#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
-#define CONFIG_NS16550_MIN_FUNCTIONS
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} }
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* For rom_loc and flash bank */
-
-#define CONFIG_RTC_DS1337
-#define CONFIG_RTC_DS1337_NOOSC
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18
-#define CONFIG_SYS_I2C_NCT72_ADDR 0x4C
-#define CONFIG_SYS_I2C_IDT6V49205B 0x69
-
-#if defined(CONFIG_PCI)
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 2, direct to uli, tgtid 2, Base address 9000 */
-#define CONFIG_SYS_PCIE2_NAME "PCIe SLOT CON9"
-#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
-#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
-#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
-
-/* controller 1, Slot 2, tgtid 1, Base address a000 */
-#define CONFIG_SYS_PCIE1_NAME "PCIe SLOT CON10"
-#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000
-#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
-/*
- * Environment
- */
-#ifdef CONFIG_ENV_FIT_UCBOOT
-
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x20000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-
-#else
-
-
-#ifdef CONFIG_RAMBOOT_SPIFLASH
-
-#define CONFIG_ENV_SIZE 0x3000 /* 12KB */
-#define CONFIG_ENV_OFFSET 0x2000 /* 8KB */
-#define CONFIG_ENV_SECT_SIZE 0x1000
-
-#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#endif
-
-#elif defined(CONFIG_RAMBOOT_SDCARD)
-#define CONFIG_FSL_FIXED_MMC_LOCATION
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#elif defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
-#define CONFIG_ENV_SIZE 0x2000
-
-#else
-#define CONFIG_ENV_BASE (CONFIG_SYS_FLASH_BASE)
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_ENV_BASE + 0xC0000)
-#if defined(CONFIG_SYS_REDUNDAND_ENVIRONMENT)
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#endif
-
-#endif
-
-#endif /* CONFIG_ENV_FIT_UCBOOT */
-
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-
-/*
- * USB
- */
-#define CONFIG_HAS_FSL_DR_USB
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_EHCI_FSL
-#endif
-#endif
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Misc Extra Settings */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-
-#if defined(CONFIG_UCP1020_REV_1_2) || defined(CONFIG_UCP1020_REV_1_3)
-#else
-#error "UCP1020 module revision is not defined !!!"
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3_NAME "eTSEC3"
-
-#define TSEC1_PHY_ADDR 4
-#define TSEC2_PHY_ADDR 0
-#define TSEC2_PHY_ADDR_SGMII 0x00
-#define TSEC3_PHY_ADDR 6
-
-#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
-
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-
-#endif
-
-#define CONFIG_HOSTNAME "UCP1020"
-#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR 1000000
-
-#if defined(CONFIG_DONGLE)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-"bootcmd=run prog_spi_mbrbootcramfs\0" \
-"bootfile=uImage\0" \
-"consoledev=ttyS0\0" \
-"cramfsfile=image.cramfs\0" \
-"dtbaddr=0x00c00000\0" \
-"dtbfile=image.dtb\0" \
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
-"fileaddr=0x01000000\0" \
-"filesize=0x00080000\0" \
-"flashmbr=sf probe 0; " \
- "tftp $loadaddr $mbr; " \
- "sf erase $mbr_offset +$filesize; " \
- "sf write $loadaddr $mbr_offset $filesize\0" \
-"flashrecovery=tftp $recoveryaddr $cramfsfile; " \
- "protect off $nor_recoveryaddr +$filesize; " \
- "erase $nor_recoveryaddr +$filesize; " \
- "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
- "protect on $nor_recoveryaddr +$filesize\0 " \
-"flashuboot=tftp $ubootaddr $ubootfile; " \
- "protect off $nor_ubootaddr +$filesize; " \
- "erase $nor_ubootaddr +$filesize; " \
- "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
- "protect on $nor_ubootaddr +$filesize\0 " \
-"flashworking=tftp $workingaddr $cramfsfile; " \
- "protect off $nor_workingaddr +$filesize; " \
- "erase $nor_workingaddr +$filesize; " \
- "cp.b $workingaddr $nor_workingaddr $filesize; " \
- "protect on $nor_workingaddr +$filesize\0 " \
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
-"kerneladdr=0x01100000\0" \
-"kernelfile=uImage\0" \
-"loadaddr=0x01000000\0" \
-"mbr=uCP1020d.mbr\0" \
-"mbr_offset=0x00000000\0" \
-"mmbr=uCP1020Quiet.mbr\0" \
-"mmcpart=0:2\0" \
-"mmc__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
- "mmc erase 1 1; " \
- "mmc write $loadaddr 1 1\0" \
-"mmc__uboot=fatload mmc $mmcpart $loadaddr $ubootfile; " \
- "mmc erase 0x40 0x400; " \
- "mmc write $loadaddr 0x40 0x400\0" \
-"netdev=eth0\0" \
-"nor_recoveryaddr=0xEC0A0000\0" \
-"nor_ubootaddr=0xEFF80000\0" \
-"nor_workingaddr=0xECFA0000\0" \
-"norbootrecovery=setenv bootargs $recoverybootargs" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "run norloadrecovery; " \
- "bootm $kerneladdr - $dtbaddr\0" \
-"norbootworking=setenv bootargs $workingbootargs" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "run norloadworking; " \
- "bootm $kerneladdr - $dtbaddr\0" \
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
- "setenv cramfsaddr $nor_recoveryaddr; " \
- "cramfsload $dtbaddr $dtbfile; " \
- "cramfsload $kerneladdr $kernelfile\0" \
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
- "setenv cramfsaddr $nor_workingaddr; " \
- "cramfsload $dtbaddr $dtbfile; " \
- "cramfsload $kerneladdr $kernelfile\0" \
-"prog_spi_mbr=run spi__mbr\0" \
-"prog_spi_mbrboot=run spi__mbr; run spi__boot1; run spi__boot2\0" \
-"prog_spi_mbrbootcramfs=run spi__mbr; run spi__boot1; run spi__boot2; " \
- "run spi__cramfs\0" \
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "tftp $rootfsaddr $rootfsfile; " \
- "tftp $loadaddr $kernelfile; " \
- "tftp $dtbaddr $dtbfile; " \
- "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
-"ramdisk_size=120000\0" \
-"ramdiskfile=rootfs.ext2.gz.uboot\0" \
-"recoveryaddr=0x02F00000\0" \
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
- "mw.l 0xffe0f008 0x00400000\0" \
-"rootfsaddr=0x02F00000\0" \
-"rootfsfile=rootfs.ext2.gz.uboot\0" \
-"rootpath=/opt/nfsroot\0" \
-"spi__boot1=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
- "protect off 0xeC000000 +$filesize; " \
- "erase 0xEC000000 +$filesize; " \
- "cp.b $loadaddr 0xEC000000 $filesize; " \
- "cmp.b $loadaddr 0xEC000000 $filesize; " \
- "protect on 0xeC000000 +$filesize\0" \
-"spi__boot2=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
- "protect off 0xeFF80000 +$filesize; " \
- "erase 0xEFF80000 +$filesize; " \
- "cp.b $loadaddr 0xEFF80000 $filesize; " \
- "cmp.b $loadaddr 0xEFF80000 $filesize; " \
- "protect on 0xeFF80000 +$filesize\0" \
-"spi__bootd=fatload mmc $mmcpart $loadaddr $ubootd; " \
- "sf probe 0; sf erase 0x8000 +$filesize; " \
- "sf write $loadaddr 0x8000 $filesize\0" \
-"spi__cramfs=fatload mmc $mmcpart $loadaddr image.cramfs; " \
- "protect off 0xec0a0000 +$filesize; " \
- "erase 0xeC0A0000 +$filesize; " \
- "cp.b $loadaddr 0xeC0A0000 $filesize; " \
- "protect on 0xec0a0000 +$filesize\0" \
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
- "sf probe 1; sf erase 0 +$filesize; " \
- "sf write $loadaddr 0 $filesize\0" \
-"spi__mbrd=fatload mmc $mmcpart $loadaddr $mbr; " \
- "sf probe 0; sf erase 0 +$filesize; " \
- "sf write $loadaddr 0 $filesize\0" \
-"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
-"ubootaddr=0x01000000\0" \
-"ubootfile=u-boot.bin\0" \
-"ubootd=u-boot4dongle.bin\0" \
-"upgrade=run flashworking\0" \
-"usb_phy_type=ulpi\0 " \
-"workingaddr=0x02F00000\0" \
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else
-
-#if defined(CONFIG_UCP1020T1)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-"bootcmd=run releasefpga; run norbootworking || run norbootrecovery\0" \
-"bootfile=uImage\0" \
-"consoledev=ttyS0\0" \
-"cramfsfile=image.cramfs\0" \
-"dtbaddr=0x00c00000\0" \
-"dtbfile=image.dtb\0" \
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
-"fileaddr=0x01000000\0" \
-"filesize=0x00080000\0" \
-"flashmbr=sf probe 0; " \
- "tftp $loadaddr $mbr; " \
- "sf erase $mbr_offset +$filesize; " \
- "sf write $loadaddr $mbr_offset $filesize\0" \
-"flashrecovery=tftp $recoveryaddr $cramfsfile; " \
- "protect off $nor_recoveryaddr +$filesize; " \
- "erase $nor_recoveryaddr +$filesize; " \
- "cp.b $recoveryaddr $nor_recoveryaddr $filesize; " \
- "protect on $nor_recoveryaddr +$filesize\0 " \
-"flashuboot=tftp $ubootaddr $ubootfile; " \
- "protect off $nor_ubootaddr +$filesize; " \
- "erase $nor_ubootaddr +$filesize; " \
- "cp.b $ubootaddr $nor_ubootaddr $filesize; " \
- "protect on $nor_ubootaddr +$filesize\0 " \
-"flashworking=tftp $workingaddr $cramfsfile; " \
- "protect off $nor_workingaddr +$filesize; " \
- "erase $nor_workingaddr +$filesize; " \
- "cp.b $workingaddr $nor_workingaddr $filesize; " \
- "protect on $nor_workingaddr +$filesize\0 " \
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
-"kerneladdr=0x01100000\0" \
-"kernelfile=uImage\0" \
-"loadaddr=0x01000000\0" \
-"mbr=uCP1020.mbr\0" \
-"mbr_offset=0x00000000\0" \
-"netdev=eth0\0" \
-"nor_recoveryaddr=0xEC0A0000\0" \
-"nor_ubootaddr=0xEFF80000\0" \
-"nor_workingaddr=0xECFA0000\0" \
-"norbootrecovery=setenv bootargs $recoverybootargs" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "run norloadrecovery; " \
- "bootm $kerneladdr - $dtbaddr\0" \
-"norbootworking=setenv bootargs $workingbootargs" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "run norloadworking; " \
- "bootm $kerneladdr - $dtbaddr\0" \
-"norloadrecovery=mw.l $kerneladdr 0x0 0x00a00000; " \
- "setenv cramfsaddr $nor_recoveryaddr; " \
- "cramfsload $dtbaddr $dtbfile; " \
- "cramfsload $kerneladdr $kernelfile\0" \
-"norloadworking=mw.l $kerneladdr 0x0 0x00a00000; " \
- "setenv cramfsaddr $nor_workingaddr; " \
- "cramfsload $dtbaddr $dtbfile; " \
- "cramfsload $kerneladdr $kernelfile\0" \
-"othbootargs=quiet\0" \
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "tftp $rootfsaddr $rootfsfile; " \
- "tftp $loadaddr $kernelfile; " \
- "tftp $dtbaddr $dtbfile; " \
- "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
-"ramdisk_size=120000\0" \
-"ramdiskfile=rootfs.ext2.gz.uboot\0" \
-"recoveryaddr=0x02F00000\0" \
-"recoverybootargs=root=/dev/mtdblock0 rootfstype=cramfs ro\0" \
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
- "mw.l 0xffe0f008 0x00400000\0" \
-"rootfsaddr=0x02F00000\0" \
-"rootfsfile=rootfs.ext2.gz.uboot\0" \
-"rootpath=/opt/nfsroot\0" \
-"silent=1\0" \
-"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
-"ubootaddr=0x01000000\0" \
-"ubootfile=u-boot.bin\0" \
-"upgrade=run flashworking\0" \
-"workingaddr=0x02F00000\0" \
-"workingbootargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0"
-
-#else /* For Arcturus Modules */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-"bootcmd=run norkernel\0" \
-"bootfile=uImage\0" \
-"consoledev=ttyS0\0" \
-"dtbaddr=0x00c00000\0" \
-"dtbfile=image.dtb\0" \
-"ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
-"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" \
-"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" \
-"fileaddr=0x01000000\0" \
-"filesize=0x00080000\0" \
-"flashmbr=sf probe 0; " \
- "tftp $loadaddr $mbr; " \
- "sf erase $mbr_offset +$filesize; " \
- "sf write $loadaddr $mbr_offset $filesize\0" \
-"flashuboot=tftp $loadaddr $ubootfile; " \
- "protect off $nor_ubootaddr0 +$filesize; " \
- "erase $nor_ubootaddr0 +$filesize; " \
- "cp.b $loadaddr $nor_ubootaddr0 $filesize; " \
- "protect on $nor_ubootaddr0 +$filesize; " \
- "protect off $nor_ubootaddr1 +$filesize; " \
- "erase $nor_ubootaddr1 +$filesize; " \
- "cp.b $loadaddr $nor_ubootaddr1 $filesize; " \
- "protect on $nor_ubootaddr1 +$filesize\0 " \
-"format0=protect off $part0base +$part0size; " \
- "erase $part0base +$part0size\0" \
-"format1=protect off $part1base +$part1size; " \
- "erase $part1base +$part1size\0" \
-"format2=protect off $part2base +$part2size; " \
- "erase $part2base +$part2size\0" \
-"format3=protect off $part3base +$part3size; " \
- "erase $part3base +$part3size\0" \
-"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0 " \
-"kerneladdr=0x01100000\0" \
-"kernelargs=root=/dev/mtdblock1 rootfstype=cramfs ro\0" \
-"kernelfile=uImage\0" \
-"loadaddr=0x01000000\0" \
-"mbr=uCP1020.mbr\0" \
-"mbr_offset=0x00000000\0" \
-"netdev=eth0\0" \
-"nor_ubootaddr0=0xEC000000\0" \
-"nor_ubootaddr1=0xEFF80000\0" \
-"norkernel=setenv bootargs $kernelargs console=$consoledev,$baudrate; " \
- "run norkernelload; " \
- "bootm $kerneladdr - $dtbaddr\0" \
-"norkernelload=mw.l $kerneladdr 0x0 0x00a00000; " \
- "setenv cramfsaddr $part0base; " \
- "cramfsload $dtbaddr $dtbfile; " \
- "cramfsload $kerneladdr $kernelfile\0" \
-"part0base=0xEC100000\0" \
-"part0size=0x00700000\0" \
-"part1base=0xEC800000\0" \
-"part1size=0x02000000\0" \
-"part2base=0xEE800000\0" \
-"part2size=0x00800000\0" \
-"part3base=0xEF000000\0" \
-"part3size=0x00F80000\0" \
-"partENVbase=0xEC080000\0" \
-"partENVsize=0x00080000\0" \
-"program0=tftp part0-000000.bin; " \
- "protect off $part0base +$filesize; " \
- "erase $part0base +$filesize; " \
- "cp.b $loadaddr $part0base $filesize; " \
- "echo Verifying...; " \
- "cmp.b $loadaddr $part0base $filesize\0" \
-"program1=tftp part1-000000.bin; " \
- "protect off $part1base +$filesize; " \
- "erase $part1base +$filesize; " \
- "cp.b $loadaddr $part1base $filesize; " \
- "echo Verifying...; " \
- "cmp.b $loadaddr $part1base $filesize\0" \
-"program2=tftp part2-000000.bin; " \
- "protect off $part2base +$filesize; " \
- "erase $part2base +$filesize; " \
- "cp.b $loadaddr $part2base $filesize; " \
- "echo Verifying...; " \
- "cmp.b $loadaddr $part2base $filesize\0" \
-"ramboot=setenv bootargs root=/dev/ram ramdisk_size=$ramdisk_size ro" \
- " console=$consoledev,$baudrate $othbootargs; " \
- "tftp $rootfsaddr $rootfsfile; " \
- "tftp $loadaddr $kernelfile; " \
- "tftp $dtbaddr $dtbfile; " \
- "bootm $loadaddr $rootfsaddr $dtbaddr\0" \
-"ramdisk_size=120000\0" \
-"ramdiskfile=rootfs.ext2.gz.uboot\0" \
-"releasefpga=mw.l 0xffe0f000 0x00400000; mw.l 0xffe0f004 0x00000000; " \
- "mw.l 0xffe0f008 0x00400000\0" \
-"rootfsaddr=0x02F00000\0" \
-"rootfsfile=rootfs.ext2.gz.uboot\0" \
-"rootpath=/opt/nfsroot\0" \
-"spi__mbr=fatload mmc $mmcpart $loadaddr $mmbr; " \
- "sf probe 0; sf erase 0 +$filesize; " \
- "sf write $loadaddr 0 $filesize\0" \
-"spi__boot=fatload mmc $mmcpart $loadaddr u-boot.bin; " \
- "protect off 0xeC000000 +$filesize; " \
- "erase 0xEC000000 +$filesize; " \
- "cp.b $loadaddr 0xEC000000 $filesize; " \
- "cmp.b $loadaddr 0xEC000000 $filesize; " \
- "protect on 0xeC000000 +$filesize\0" \
-"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE_NOR) " $filesize\0"\
-"uboot= " __stringify(CONFIG_UBOOTPATH) "\0" \
-"ubootfile=u-boot.bin\0" \
-"upgrade=run flashuboot\0" \
-"usb_phy_type=ulpi\0 " \
-"boot_nfs= " \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr\0" \
-"boot_hd = " \
- "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "usb start;" \
- "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \
- "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \
- "bootm $loadaddr - $fdtaddr\0" \
-"boot_usb_fat = " \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs " \
- "ramdisk_size=$ramdisk_size;" \
- "usb start;" \
- "fatload usb 0:2 $loadaddr $bootfile;" \
- "fatload usb 0:2 $fdtaddr $fdtfile;" \
- "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
-"boot_usb_ext2 = " \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs " \
- "ramdisk_size=$ramdisk_size;" \
- "usb start;" \
- "ext2load usb 0:4 $loadaddr $bootfile;" \
- "ext2load usb 0:4 $fdtaddr $fdtfile;" \
- "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr\0 " \
-"boot_nor = " \
- "setenv bootargs root=/dev/$jffs2nor rw " \
- "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \
- "bootm $norbootaddr - $norfdtaddr\0 " \
-"boot_ram = " \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs " \
- "ramdisk_size=$ramdisk_size;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr\0"
-
-#endif
-#endif
-
-#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 08:19:07 +0000