diff options
Diffstat (limited to 'include/configs/am3517_evm.h')
-rw-r--r-- | include/configs/am3517_evm.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h deleted file mode 100644 index 3e5f0b1..0000000 --- a/include/configs/am3517_evm.h +++ /dev/null @@ -1,190 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * am3517_evm.h - Default configuration for AM3517 EVM board. - * - * Author: Vaibhav Hiremath <hvaibhav@ti.com> - * - * Based on omap3_evm_config.h - * - * Copyright (C) 2010 Texas Instruments Incorporated - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/ti_omap3_common.h> - -#define CONFIG_REVISION_TAG - -/* Hardware drivers */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* - * USB configuration - * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard - * Enable CONFIG_USB_MUSB_GADGET for Device functionalities. - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_USB_EHCI_OMAP -#else -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 -#endif - -/* I2C */ - -/* Ethernet */ -#define CONFIG_DRIVER_TI_EMAC_USE_RMII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 - -/* Board NAND Info. */ -#ifdef CONFIG_NAND -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT 64 -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \ - 11, 12, 13, 14, 16, 17, 18, 19, 20, \ - 21, 22, 23, 24, 25, 26, 27, 28, 30, \ - 31, 32, 33, 34, 35, 36, 37, 38, 39, \ - 40, 41, 42, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56 } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 13 -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW -#define CONFIG_SYS_NAND_MAX_OOBFREE 2 -#define CONFIG_SYS_NAND_MAX_ECCPOS 56 -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000 -/* NAND block size is 128 KiB. Synchronize these values with - * corresponding Device Tree entries in Linux: - * MLO(SPL) 4 * NAND_BLOCK_SIZE = 512 KiB @ 0x000000 - * U-Boot 15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000 - * U-Boot environment 2 * NAND_BLOCK_SIZE = 256 KiB @ 0x260000 - * Kernel 64 * NAND_BLOCK_SIZE = 8 MiB @ 0x2A0000 - * DTB 4 * NAND_BLOCK_SIZE = 512 KiB @ 0xAA0000 - * RootFS Remaining Flash Space @ 0xB20000 - */ -#endif /* CONFIG_NAND */ - -/* Environment information */ - -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyS2,115200n8\0" \ - "fdtfile=am3517-evm.dtb\0" \ - "fdtaddr=0x82C00000\0" \ - "vram=16M\0" \ - "bootenv=uEnv.txt\0" \ - "cmdline=\0" \ - "optargs=\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mmcdev=0\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext4 rootwait fixrtc\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${optargs} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype} " \ - "${cmdline}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${mtdparts} " \ - "${optargs} " \ - "root=ubi0:rootfs rw ubi.mtd=rootfs " \ - "rootfstype=ubifs rootwait " \ - "${cmdline}\0" \ - "loadbootenv=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootenv}\0"\ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${bootfile}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 2a0000 800000; " \ - "nand read ${fdtaddr} aa0000 80000; " \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device $mmcdev; " \ - "if run loadbootenv; then " \ - "run importbootenv; " \ - "fi; " \ - "echo Checking if uenvcmd is set ...; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "echo Running default loadimage ...; " \ - "setenv bootfile zImage; " \ - "if run loadimage; then " \ - "run loadfdt; " \ - "run mmcboot; " \ - "fi; " \ - "else run nandboot; fi" - -/* Miscellaneous configurable options */ - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -/* Physical Memory Map */ -#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) - -/* FLASH and environment organization */ - -/* **** PISMO SUPPORT *** */ -#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors */ - /* on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */ -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE -#endif - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE - -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_ENV_ADDR 0x260000 - -/* Defines for SPL */ - -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC - -#endif /* __CONFIG_H */ |