diff options
Diffstat (limited to 'include/configs/am43xx_evm.h')
| -rw-r--r-- | include/configs/am43xx_evm.h | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h deleted file mode 100644 index d355b80..0000000 --- a/include/configs/am43xx_evm.h +++ /dev/null @@ -1,278 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * am43xx_evm.h - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#ifndef __CONFIG_AM43XX_EVM_H -#define __CONFIG_AM43XX_EVM_H - -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ - -#include <asm/arch/omap.h> - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_CLK 48000000 -#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL) -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_SERIAL -#endif - -/* I2C Configuration */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* Power */ -#ifndef CONFIG_DM_I2C -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#endif -#define CONFIG_POWER_TPS65218 -#define CONFIG_POWER_TPS62362 - -/* SPL defines. */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) - -/* Enabling L2 Cache */ -#define CONFIG_SYS_L2_PL310 -#define CONFIG_SYS_PL310_BASE 0x48242000 - -/* - * Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * When building U-Boot such that there is no previous loader - * we need to call board_early_init_f. This is taken care of in - * s_init when we have SPL used. - */ - -/* Now bring in the rest of the common code. */ -#include <configs/ti_armv7_omap.h> - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ - -/* SPL USB Support */ - -#if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) -#define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 -#define CONFIG_USB_XHCI_OMAP - -#define CONFIG_AM437X_USB2PHY2_HOST -#endif - -#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USB_ETHER) -#undef CONFIG_USB_DWC3_PHY_OMAP -#undef CONFIG_USB_DWC3_OMAP -#undef CONFIG_USB_DWC3 -#undef CONFIG_USB_DWC3_GADGET - -#undef CONFIG_USB_GADGET_DOWNLOAD -#undef CONFIG_USB_GADGET_VBUS_DRAW -#undef CONFIG_USB_GADGET_MANUFACTURER -#undef CONFIG_USB_GADGET_VENDOR_NUM -#undef CONFIG_USB_GADGET_PRODUCT_NUM -#undef CONFIG_USB_GADGET_DUALSPEED -#endif - -/* - * Disable MMC DM for SPL build and can be re-enabled after adding - * DM support in SPL - */ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_TIMER -#endif - -#ifndef CONFIG_SPL_BUILD -/* USB Device Firmware Update support */ -#define DFUARGS \ - "dfu_bufsiz=0x10000\0" \ - DFU_ALT_INFO_MMC \ - DFU_ALT_INFO_EMMC \ - DFU_ALT_INFO_RAM \ - DFU_ALT_INFO_QSPI_XIP -#else -#define DFUARGS -#endif - -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_OFFSET_REDUND 0x120000 -#endif - -#ifndef CONFIG_SPL_BUILD -#include <environment/ti/dfu.h> -#include <environment/ti/mmc.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - DEFAULT_FIT_TI_ARGS \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "console=ttyO0,115200n8\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ - "usbroot=/dev/sda2 rw\0" \ - "usbrootfstype=ext4 rootwait\0" \ - "usbdev=0\0" \ - "ramroot=/dev/ram0 rw\0" \ - "ramrootfstype=ext2\0" \ - "usbargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${usbroot} " \ - "rootfstype=${usbrootfstype}\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ - "usbboot=" \ - "setenv devnum ${usbdev}; " \ - "setenv devtype usb; " \ - "usb start ${usbdev}; " \ - "if usb dev ${usbdev}; then " \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt; " \ - "echo Booting from usb ${usbdev}...; " \ - "run usbargs;" \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi;" \ - "fi\0" \ - "fi;" \ - "usb stop ${usbdev};\0" \ - "findfdt="\ - "if test $board_name = AM43EPOS; then " \ - "setenv fdtfile am43x-epos-evm.dtb; fi; " \ - "if test $board_name = AM43__GP; then " \ - "setenv fdtfile am437x-gp-evm.dtb; fi; " \ - "if test $board_name = AM43XXHS; then " \ - "setenv fdtfile am437x-gp-evm.dtb; fi; " \ - "if test $board_name = AM43__SK; then " \ - "setenv fdtfile am437x-sk-evm.dtb; fi; " \ - "if test $board_name = AM43_IDK; then " \ - "setenv fdtfile am437x-idk-evm.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree; fi; \0" \ - NANDARGS \ - NETARGS \ - DFUARGS \ - -#define CONFIG_BOOTCOMMAND \ - "if test ${boot_fit} -eq 1; then " \ - "run update_to_fit;" \ - "fi;" \ - "run findfdt; " \ - "run envboot;" \ - "run mmcboot;" \ - "run usbboot;" \ - NANDBOOT \ - -#endif - -#ifndef CONFIG_SPL_BUILD -/* CPSW Ethernet */ -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ - -#define CONFIG_SYS_RX_ETH_BUFFER 64 - -/* NAND support */ -#ifdef CONFIG_NAND -/* NAND: device related configs */ -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -/* NAND: driver related configs */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ - 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ - 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ - 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ - 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ - 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ - 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ - 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ - 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ - 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ - 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ - 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ - 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ - 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ - 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ - 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ - 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ - 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ - } -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 26 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 -/* NAND: SPL related configs */ -/* NAND: SPL falcon mode configs */ -#ifdef CONFIG_SPL_OS_BOOT -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ -#endif -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ - "nand read ${loadaddr} NAND.kernel; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" -#define NANDBOOT "run nandboot; " -#else /* !CONFIG_NAND */ -#define NANDARGS -#define NANDBOOT -#endif /* CONFIG_NAND */ - -#if defined(CONFIG_TI_SECURE_DEVICE) -/* Avoid relocating onto firewalled area at end of DRAM */ -#define CONFIG_PRAM (64 * 1024) -#endif /* CONFIG_TI_SECURE_DEVICE */ - -#endif /* __CONFIG_AM43XX_EVM_H */ |