diff options
Diffstat (limited to 'include/configs/apalis_imx6.h')
| -rw-r--r-- | include/configs/apalis_imx6.h | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h deleted file mode 100644 index a5f9a96..0000000 --- a/include/configs/apalis_imx6.h +++ /dev/null @@ -1,240 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2013-2019 Toradex, Inc. - * - * Configuration settings for the Toradex Apalis iMX6 - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "mx6_common.h" - -#undef CONFIG_DISPLAY_BOARDINFO - -#define CONFIG_MACH_TYPE 4886 - -#include <asm/arch/imx-regs.h> -#include <asm/mach-imx/gpio.h> - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_SERIAL_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - -/* I2C Configs */ -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_MXC_I2C3_SPEED 400000 - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 3 - -/* - * SATA Configs - */ -#ifdef CONFIG_CMD_SATA -#define CONFIG_LBA48 -#endif - -/* Network */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define PHY_ANEG_TIMEOUT 15000 /* PHY needs longer aneg time */ -#define CONFIG_FEC_MXC_PHYADDR 6 -#define CONFIG_TFTP_TSIZE - -/* USB Configs */ -/* Host */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -/* Client */ -#define CONFIG_USBD_HS - -/* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CONSOLE_MUX -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* Command definition */ -#undef CONFIG_CMD_LOADB -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FLASH - -#undef CONFIG_IPADDR -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#undef CONFIG_SERVERIP -#define CONFIG_SERVERIP 192.168.10.1 - -#define CONFIG_LOADADDR 0x12000000 - -#ifndef CONFIG_SPL_BUILD -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 1) \ - func(MMC, mmc, 2) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> -#undef BOOTENV_RUN_NET_USB_START -#define BOOTENV_RUN_NET_USB_START "" -#else /* CONFIG_SPL_BUILD */ -#define BOOTENV -#endif /* CONFIG_SPL_BUILD */ - -#define DFU_ALT_EMMC_INFO \ - "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "zImage fat 0 1;" \ - "imx6q-apalis-eval.dtb fat 0 1;" \ - "imx6q-apalis-cam-eval.dtb fat 0 1" - -#define EMMC_BOOTCMD \ - "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ - "ro,noatime rootfstype=ext4 rootwait\0" \ - "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ - "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ - "${vidargs}; echo Booting from internal eMMC chip...; " \ - "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} " \ - "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \ - "bootz ${kernel_addr_r} ${dtbparam}\0" \ - "emmcbootpart=1\0" \ - "emmcdev=0\0" \ - "emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \ - "${fdt_addr_r} ${fdt_file} && " \ - "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \ - "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \ - "emmcrootpart=2\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x20000000\0" \ - "fdt_addr_r=0x12100000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "kernel_addr_r=0x11000000\0" \ - "pxefile_addr_r=0x17100000\0" \ - "ramdisk_addr_r=0x12200000\0" \ - "scriptaddr=0x17000000\0" - -#define NFS_BOOTCMD \ - "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \ - "nfsboot=run setup; " \ - "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ - "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ - "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \ - "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ - "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" - -#ifndef CONFIG_TDX_APALIS_IMX6_V1_0 -#define FDT_FILE "imx6q-apalis-eval.dtb" -#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb" -#else -#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" -#endif -#define CONFIG_EXTRA_ENV_SETTINGS \ - BOOTENV \ - "bootcmd=setenv fdtfile ${fdt_file}; run distro_bootcmd ; " \ - "usb start ; " \ - "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ - "boot_file=zImage\0" \ - "console=ttymxc0\0" \ - "defargs=enable_wait_mode=off vmalloc=400M\0" \ - "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ - EMMC_BOOTCMD \ - "fdt_file=" FDT_FILE "\0" \ - "fdt_fixup=;\0" \ - MEM_LAYOUT_ENV_SETTINGS \ - NFS_BOOTCMD \ - "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ - "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ - "flash_eth.img && source ${loadaddr}\0" \ - "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \ - "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \ - "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \ - " ${loadaddr} flash_blk.img && " \ - "source ${loadaddr}\0" \ - "setup=setenv setupargs fec_mac=${ethaddr} " \ - "consoleblank=0 no_console_suspend=1 console=tty1 " \ - "console=${console},${baudrate}n8\0 " \ - "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ - "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \ - "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ - "source ${loadaddr}\0" \ - "splashpos=m,m\0" \ - "splashimage=" __stringify(CONFIG_LOADADDR) "\0" \ - "vidargs=mxc_hdmi.only_cea=1 " \ - "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \ - "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \ - "fbmem=32M\0 " - -/* Miscellaneous configurable options */ -#undef CONFIG_SYS_CBSIZE -#define CONFIG_SYS_CBSIZE 1024 -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 48 - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ -#define CONFIG_ENV_SIZE (8 * 1024) - -#if defined(CONFIG_ENV_IS_IN_MMC) -/* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ - CONFIG_TDX_CFG_BLOCK_OFFSET) -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 1 -#endif - -#define CONFIG_CMD_TIME - -#endif /* __CONFIG_H */ |