diff options
Diffstat (limited to 'include/configs/aristainetos-common.h')
| -rw-r--r-- | include/configs/aristainetos-common.h | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h deleted file mode 100644 index e998d9b..0000000 --- a/include/configs/aristainetos-common.h +++ /dev/null @@ -1,201 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2015 - * (C) Copyright 2014 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * Copyright (C) 2012 Freescale Semiconductor, Inc. - * - * Configuration settings for the Freescale i.MX6Q SabreSD board. - */ -#ifndef __ARISTAINETOS_COMMON_CONFIG_H -#define __ARISTAINETOS_COMMON_CONFIG_H - -#include "mx6_common.h" - -#define CONFIG_MACH_TYPE 4501 -#define CONFIG_MMCROOT "/dev/mmcblk0p1" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M) - -#define CONFIG_MXC_UART - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 - -#define CONFIG_SPI_FLASH_MTD -#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=u-boot.scr\0" \ - "fit_file=/boot/system.itb\0" \ - "loadaddr=0x12000000\0" \ - "fit_addr_r=0x14000000\0" \ - "uboot=/boot/u-boot.imx\0" \ - "uboot_sz=d0000\0" \ - "rescue_sys_addr=f0000\0" \ - "rescue_sys_length=f10000\0" \ - "panel=lb07wv8\0" \ - "splashpos=m,m\0" \ - "console=" CONSOLE_DEV "\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "set_fit_default=fdt addr ${fit_addr_r};fdt set /configurations " \ - "default ${board_type}\0" \ - "get_env=mw ${loadaddr} 0 0x20000;" \ - "mmc rescan;" \ - "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ - "env import -t ${loadaddr}\0" \ - "default_env=mw ${loadaddr} 0 0x20000;" \ - "env export -t ${loadaddr} serial# ethaddr eth1addr " \ - "board_type panel;" \ - "env default -a;" \ - "env import -t ${loadaddr}\0" \ - "loadbootscript=" \ - "ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "mmcpart=1\0" \ - "mmcdev=0\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs addmtd addmisc set_fit_default;" \ - "bootm ${fit_addr_r}\0" \ - "mmc_load_fit=ext2load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "mmc_load_uboot=ext2load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ - "${uboot}\0" \ - "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ - "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ - "setexpr uboot_maxsize ${uboot_sz} - 400;" \ - "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ - "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ - "sf write ${loadaddr} 400 ${filesize};" \ - "sf read ${cmp_buf} 400 ${uboot_sz};" \ - "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ - "ubiboot=echo Booting from ubi ...; " \ - "run ubiargs addmtd addmisc set_fit_default;" \ - "bootm ${fit_addr_r}\0" \ - "rescueargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/ram rw\0 " \ - "rescueboot=echo Booting rescue system from NOR ...; " \ - "run rescueargs addmtd addmisc set_fit_default;" \ - "bootm ${fit_addr_r}\0" \ - "rescue_load_fit=sf probe;sf read ${fit_addr_r} ${rescue_sys_addr} " \ - "${rescue_sys_length}; imi ${fit_addr_r}\0" \ - CONFIG_EXTRA_ENV_BOARD_SETTINGS - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run mmc_load_fit; then " \ - "run mmcboot; " \ - "else " \ - "if run ubifs_load_fit; then " \ - "run ubiboot; " \ - "else " \ - "if run rescue_load_fit; then " \ - "run rescueboot; " \ - "else " \ - "echo RESCUE SYSTEM BOOT " \ - "FAILURE;" \ - "fi; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else " \ - "if run ubifs_load_fit; then " \ - "run ubiboot; " \ - "else " \ - "if run rescue_load_fit; then " \ - "run rescueboot; " \ - "else " \ - "echo RESCUE SYSTEM BOOT FAILURE;" \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_ARP_TIMEOUT 200UL - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000) -#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -#define CONFIG_ENV_SIZE (12 * 1024) -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT -#define CONFIG_ENV_SECT_SIZE (0x010000) -#define CONFIG_ENV_OFFSET (0x0d0000) -#define CONFIG_ENV_OFFSET_REDUND (0x0e0000) - -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} } - -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* DMA stuff, needed for GPMI/MXS NAND support */ - -/* RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#define CONFIG_RTC_M41T11 - -/* USB Configs */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 - -/* UBI support */ - -/* Framebuffer */ -/* check this console not needed, after test remove it */ -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_VIDEO_SKIP - -#define CONFIG_IMX6_PWM_PER_CLK 66000000 - -#endif /* __ARISTAINETOS_COMMON_CONFIG_H */ |