1 files changed, 0 insertions, 135 deletions
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
deleted file mode 100644
index 599e262..0000000
--- a/include/configs/at91sam9261ek.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91SAM9261EK board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-
-#ifdef CONFIG_AT91SAM9G10
-#define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
-#else
-#define CONFIG_AT91SAM9261EK		/* It's an Atmel AT91SAM9261 EK*/
-#endif
-
-#include <asm/hardware.h>
-
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_ATMEL_LEGACY
-
-/*
- * Hardware drivers
- */
-
-/* LCD */
-#define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_LCD
-#ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* SDRAM */
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x04000000
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE		1
-#define CONFIG_SYS_NAND_BASE			0x40000000
-#define CONFIG_SYS_NAND_DBW_8
-/* our ALE is AD22 */
-#define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
-/* our CLE is AD21 */
-#define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC15
-
-#endif
-
-/* Ethernet */
-#define CONFIG_DRIVER_DM9000
-#define CONFIG_DM9000_BASE		0x30000000
-#define DM9000_IO			CONFIG_DM9000_BASE
-#define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT
-#define CONFIG_DM9000_NO_SROM
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
-#else
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
-#endif
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-
-#define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
-
-#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END			0x23e00000
-
-#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
-
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-
-#elif CONFIG_SYS_USE_DATAFLASH_CS3
-
-/* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_OFFSET	0x4200
-#define CONFIG_ENV_SIZE		0x4200
-#define CONFIG_ENV_SECT_SIZE	0x210
-#define CONFIG_BOOTCOMMAND	"sf probe 0:3; " \
-				"sf read 0x22000000 0x84000 0x294000; " \
-				"bootm 0x22000000"
-
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_OFFSET		0x140000
-#define CONFIG_ENV_OFFSET_REDUND	0x100000
-#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0x200000 0x300000; bootm"
-#endif
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#endif