diff options
Diffstat (limited to 'include/configs/ax25-ae350.h')
| -rw-r--r-- | include/configs/ax25-ae350.h | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h deleted file mode 100644 index a4037f3..0000000 --- a/include/configs/ax25-ae350.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2017 Andes Technology Corporation - * Rick Chen, Andes Technology Corporation <rick@andestech.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * CPU and Board Configuration Options - */ -#define CONFIG_BOOTP_SEND_HOSTNAME - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ - -/* - * Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* - * max number of command args - */ -#define CONFIG_SYS_MAXARGS 16 - -/* - * Boot Argument Buffer Size - */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Size of malloc() pool - * 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough - */ -#define CONFIG_SYS_MALLOC_LEN (512 << 10) - -/* DT blob (fdt) address */ -#define CONFIG_SYS_FDT_BASE 0x800f0000 - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1 \ - (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ -#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 - -/* - * Serial console configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#ifndef CONFIG_DM_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#endif -#define CONFIG_SYS_NS16550_CLK 19660800 - -/* Init Stack Pointer */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Load address and memory test area should agree with - * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */ - -/* - * memtest works on 512 MB in DRAM - */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) - -/* - * FLASH and environment organization - */ - -/* use CFI framework */ - -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_CFI_FLASH_STATUS_POLL - -/* support JEDEC */ -#ifdef CONFIG_CFI_FLASH -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 -#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ -#define PHYS_FLASH_1 0x88000000 /* BANK 0 */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ - -/* max number of memory banks */ -/* - * There are 4 banks supported for this Controller, - * but we have only 1 bank connected to flash on board -*/ -#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#endif -#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} - -/* max number of sectors on one chip */ -#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* environments */ -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_ENV_OVERWRITE - -/* SPI FLASH */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ - -/* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) -/* Increase max gunzip size */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) - -/* When we use RAM as ENV */ -#define CONFIG_ENV_SIZE 0x2000 - -/* Enable distro boot */ -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr_r=0x00080000\0" \ - "pxefile_addr_r=0x01f00000\0" \ - "scriptaddr=0x01f00000\0" \ - "fdt_addr_r=0x02000000\0" \ - "ramdisk_addr_r=0x02800000\0" \ - BOOTENV - -#endif /* __CONFIG_H */ |