diff options
Diffstat (limited to 'include/configs/baltos.h')
| -rw-r--r-- | include/configs/baltos.h | 258 |
1 files changed, 0 insertions, 258 deletions
diff --git a/include/configs/baltos.h b/include/configs/baltos.h deleted file mode 100644 index a9b14c5..0000000 --- a/include/configs/baltos.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_BALTOS_H -#define __CONFIG_BALTOS_H - -#include <linux/sizes.h> -#include <configs/ti_am335x_common.h> - -#define CONFIG_MACH_TYPE MACH_TYPE_AM335XEVM - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -/* FIT support */ -#define CONFIG_SYS_BOOTM_LEN SZ_64M - -#ifdef CONFIG_NAND - -#define NANDARGS \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "nandargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "${mtdparts} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nandroot=ubi0:rootfs rw ubi.mtd=5\0" \ - "nandrootfstype=ubifs rootwait=1\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "setenv loadaddr 0x84000000; " \ - "ubi part UBI; " \ - "ubifsmount ubi0:kernel; " \ - "ubifsload $loadaddr kernel-fit.itb;" \ - "ubifsumount; " \ - "bootm ${loadaddr}#conf${board_name}; " \ - "if test $? -ne 0; then echo Using default FIT config; " \ - "bootm ${loadaddr}; fi;\0" -#else -#define NANDARGS "" -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "boot_fdt=try\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "fdtfile=undefined\0" \ - "console=ttyO0,115200n8\0" \ - "partitions=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 ro\0" \ - "usbroot=/dev/sda2 ro\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "usbrootfstype=ext4 rootwait\0" \ - "rootpath=/export/rootfs\0" \ - "nfsopts=nolock\0" \ - "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ - "::off\0" \ - "ramroot=/dev/ram0 rw\0" \ - "ramrootfstype=ext2\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "${mtdparts} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "usbargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "${mtdparts} " \ - "root=${usbroot} " \ - "rootfstype=${usbrootfstype}\0" \ - "spiroot=/dev/mtdblock4 rw\0" \ - "spirootfstype=jffs2\0" \ - "spisrcaddr=0xe0000\0" \ - "spiimgsize=0x362000\0" \ - "spibusno=0\0" \ - "spiargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${spiroot} " \ - "rootfstype=${spirootfstype}\0" \ - "netargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=/dev/nfs " \ - "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ - "ip=dhcp\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "usbloadbootenv=load usb 0:1 ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "usbimportbootenv=echo Importing environment from USB ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "usbloadimage=load usb 0:1 ${loadaddr} kernel-fit.itb\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "usbloados=run usbargs; " \ - "bootm ${loadaddr}#conf${board_name}; " \ - "if test $? -ne 0; then " \ - "echo Using default FIT configuration; " \ - "bootm ${loadaddr}; " \ - "fi;\0" \ - "mmcloados=run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "usbboot=usb reset; " \ - "if usb storage; then " \ - "echo USB drive found;" \ - "if run usbloadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run usbimportbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run usbloadimage; then " \ - "run usbloados;" \ - "fi;" \ - "fi;\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run mmcloados;" \ - "fi;" \ - "fi;\0" \ - "spiboot=echo Booting from spi ...; " \ - "run spiargs; " \ - "sf probe ${spibusno}:0; " \ - "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ - "bootz ${loadaddr}\0" \ - "netboot=echo Booting from network ...; " \ - "setenv autoload no; " \ - "dhcp; " \ - "tftp ${loadaddr} ${bootfile}; " \ - "tftp ${fdtaddr} ${fdtfile}; " \ - "run netargs; " \ - "bootz ${loadaddr} - ${fdtaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ - "findfdt=setenv fdtfile am335x-baltos.dtb\0" \ - NANDARGS - /*DFUARGS*/ -#endif - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run usbboot;" \ - "run mmcboot;" \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:2; " \ - "run mmcboot;" \ - "run nandboot;" - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* PMIC support */ -#define CONFIG_POWER_TPS65910 - -/* SPL */ -#ifndef CONFIG_NOR_BOOT - -#ifdef CONFIG_NAND -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ - CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, \ - 18, 19, 20, 21, 22, 23, 24, 25, \ - 26, 27, 28, 29, 30, 31, 32, 33, \ - 34, 35, 36, 37, 38, 39, 40, 41, \ - 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, } - -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#endif -#endif - -/* - * USB configuration. We enable MUSB support, both for host and for - * gadget. We set USB0 as peripheral and USB1 as host, based on the - * board schematic and physical port wired to each. Then for host we - * add mass storage support and for gadget we add both RNDIS ethernet - * and DFU. - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_HOST -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_OTG - -/* NAND support */ -#ifdef CONFIG_NAND -#define GPMC_NAND_ECC_LP_x8_LAYOUT 1 -#endif - -#endif /* ! __CONFIG_BALTOS_H */ |