diff options
Diffstat (limited to 'include/configs/bk4r1.h')
| -rw-r--r-- | include/configs/bk4r1.h | 270 |
1 files changed, 0 insertions, 270 deletions
diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h deleted file mode 100644 index 285e28b..0000000 --- a/include/configs/bk4r1.h +++ /dev/null @@ -1,270 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2018 - * Lukasz Majewski, DENX Software Engineering, lukma@denx.de - * - * Copyright 2016 3ADEV <http://3adev.com> - * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> - * - * Configuration settings for BK4R1. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Define the BK4r1-specific env commands */ -#define BK4_EXTRA_ENV_SETTINGS \ - "bootlimit=3\0" \ - "eraseuserdata=false\0" \ - "altbootcmd=led 5 on; " \ - "boot\0" \ - "set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \ - "set_gpio102=mw 0x400ff0c4 0x40; mw 0x40048198 0x000011bf\0" \ - "set_gpio96=mw 0x40048180 0x282; mw 0x400ff0c4 0x1\0"\ - "set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"\ - "set_gpio6=mw 0x40048018 0x282; mw 0x400ff008 0x40\0"\ - "manage_userdata=" MANAGE_USERDATA "\0"\ - "ncenable=true\0"\ - "ncserverip=192.168.0.77\0"\ - "if_netconsole=ping $ncserverip\0"\ - "start_netconsole=setenv ncip $serverip; setenv bootdelay 10;" \ - "setenv stdin nc; setenv stdout nc; setenv stderr nc; version;\0" \ - "preboot=" BK4_NET_INIT \ - "if ${ncenable}; then run if_netconsole start_netconsole; fi\0" - -/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/ -#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \ - "run manage_userdata; " - -/* Enable PREBOOT variable */ - -/* Set ARP_TIMEOUT to 500ms */ -#define CONFIG_ARP_TIMEOUT 500UL - -/* Set ARP_TIMEOUT_COUNT to 3 repetitions */ -#define CONFIG_NET_RETRY_COUNT 5 - -/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */ -#define BK4_NET_INIT "run set_gpio122;" - -/* Check if userdata volume shall be erased */ -#define MANAGE_USERDATA "if ${eraseuserdata}; " \ - "then ubi part system; " \ - "ubi remove userdata; " \ - "ubi create userdata; " \ - "ubi detach; " \ - "setenv eraseuserdata false; " \ - "saveenv; " \ - "fi; " - -/* Autoboot options */ -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Enter passphrase to stop autoboot, booting in %d seconds\n" -#define CONFIG_AUTOBOOT_STOP_STR "123" - -#include <asm/arch/imx-regs.h> -#include <linux/sizes.h> - -#define CONFIG_SKIP_LOWLEVEL_INIT - -/* Enable passing of ATAGs */ -#define CONFIG_CMDLINE_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4 * SZ_1M) - -/* Allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -/* NAND support */ -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -#define IMX_FEC1_BASE ENET1_BASE_ADDR - -/* QSPI Configs*/ -#ifdef CONFIG_FSL_QSPI -#define FSL_QSPI_FLASH_SIZE (SZ_16M) -#define FSL_QSPI_FLASH_NUM 2 -#define CONFIG_SYS_FSL_QSPI_LE -#endif - -#define CONFIG_LOADADDR 0x82000000 - -/* We boot from the gfxRAM area of the OCRAM. */ -#define CONFIG_BOARD_SIZE_LIMIT 520192 - -/* boot command, including the target-defined one if any */ -#define CONFIG_BOOTCOMMAND BK4_BOOTCOMMAND "run bootcmd_nand" - -/* Extra env settings (including the target-defined ones if any) */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - BK4_EXTRA_ENV_SETTINGS \ - "autoload=no\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "blimg_file=u-boot.vyb\0" \ - "blimg_addr=0x81000000\0" \ - "dtbkernel_file=fitImage\0" \ - "dtbkernel_addr=0x82000000\0" \ - "ram_file=uRamdisk\0" \ - "ram_addr=0x83000000\0" \ - "filesys=rootfs.ubifs\0" \ - "sys_addr=0x81000000\0" \ - "nfs_root=/path/to/nfs/root\0" \ - "tftptimeout=1000\0" \ - "tftptimeoutcountmax=1000000\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "ipaddr=192.168.0.60\0" \ - "serverip=192.168.0.1\0" \ - "bootargs_base=setenv bootargs rw " \ - "console=ttyLP1,115200n8\0" \ - "bootargs_sd=setenv bootargs ${bootargs} " \ - "root=/dev/mmcblk0p2 rootwait\0" \ - "bootargs_nand=setenv bootargs ${bootargs} " \ - "ubi.mtd=5 rootfstype=" \ - "ubifs root=ubi0:rootfs${active_workset}\0" \ - "bootargs_ram=setenv bootargs ${bootargs} " \ - "root=/dev/ram rw initrd=${ram_addr}\0" \ - "bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \ - "fatload mmc 0:2 ${dtbkernel_addr} ${dtbkernel_file}; " \ - "bootm ${dtbkernel_addr}\0" \ - "bootcmd_nand=sf probe;run bootargs_base bootargs_nand bootargs_mtd; " \ - "ubi part dtbkernel; " \ - "ubi readvol ${dtbkernel_addr} dtbkernel${active_workset}; " \ - "led 0 on; " \ - "bootm ${dtbkernel_addr}\0" \ - "bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \ - "nand read ${fdt_addr} dtb; " \ - "nand read ${kernel_addr} kernel; " \ - "nand read ${ram_addr} root; " \ - "bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \ - "update_bootloader_from_sd=if fatload mmc 0:2 ${blimg_addr} " \ - "${blimg_file}; " \ - "then sf probe; " \ - "mtdparts default; " \ - "nand erase.part bootloader; " \ - "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \ - "update_bootloader_from_tftp=if tftp ${blimg_addr} "\ - "${tftpdir}${blimg_file}; "\ - "then sf probe; " \ - "mtdparts default; " \ - "nand erase.part bootloader; " \ - "nand write ${blimg_addr} bootloader ${filesize}; fi\0" \ - "update_dtbkernel_from_sd=if fatload mmc 0:2 ${dtbkernel_addr} " \ - "${dtbkernel_file}; " \ - "then sf probe; " \ - "ubi part dtbkernel; " \ - "ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \ - "${filesize}; " \ - "ubi detach; fi\0" \ - "update_dtbkernel_from_tftp=if tftp ${dtbkernel_addr} " \ - "${tftpdir}${dtbkernel_file}; " \ - "then sf probe; " \ - "ubi part dtbkernel; " \ - "ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \ - "${filesize}; " \ - "ubi detach; fi\0" \ - "update_ramdisk_from_sd=if fatload mmc 0:2 ${ram_addr} " \ - "${ram_file}; " \ - "then sf probe; " \ - "mtdparts default; " \ - "nand erase.part initrd; " \ - "nand write ${ram_addr} initrd ${filesize}; fi\0" \ - "update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \ - "then sf probe; " \ - "nand erase.part initrd; " \ - "nand write ${ram_addr} initrd ${filesize}; fi\0" \ - "update_rootfs_from_sd=if fatload mmc 0:2 ${sys_addr} " \ - "${filesys}; " \ - "then sf probe; " \ - "ubi part system; " \ - "ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \ - "ubi detach; fi\0" \ - "update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \ - "then sf probe; " \ - "ubi part system; " \ - "ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \ - "ubi detach; fi\0" \ - "setup_dtbkernel=nand erase.part dtbkernel; " \ - "ubi part dtbkernel; " \ - "ubi create dtbkernel1 972000 s; " \ - "ubi create dtbkernel2 972000 s; " \ - "ubi detach\0" \ - "setup_system=nand erase.part system; " \ - "ubi part system; " \ - "ubi create rootfs1 15E15000 d; " \ - "ubi create rootfs2 15E15000 d; " \ - "ubi create userdata; " \ - "ubi detach\0" \ - "setup_nor1=" BK4_NET_INIT \ - "if tftp ${sys_addr} ${tftpdir}ubinor1.img; " \ - "then sf probe 0:0; " \ - "sf erase 0 01000000; " \ - "mtdparts default; " \ - "ubi part nor; " \ - "ubi create nor1fs; " \ - "ubi write ${sys_addr} nor1fs ${filesize}; " \ - "ubi detach; fi\0" \ - "setup_nor2=" BK4_NET_INIT \ - "if tftp ${sys_addr} ${tftpdir}ubinor2.img; " \ - "then sf probe 0:1; " \ - "sf erase 0 01000000; " \ - "mtdparts default; " \ - "ubi part nor; " \ - "ubi create nor2fs; " \ - "ubi write ${sys_addr} nor2fs ${filesize}; " \ - "ubi detach; fi\0" \ - "prepare_install_bk4r1_envs=" \ - "echo 'Preparing envs for SD card recovery!';" \ - "setenv ipaddr 192.168.0.99;" \ - "setenv serverip 192.168.0.50;" \ - "\0" \ - "install_bk4r1rs="\ - "led 0 on; " \ - "nand erase.chip; mtdparts default; "\ - "led 1 on; "\ - "run setup_dtbkernel; " \ - "run setup_system; " \ - "led 2 on;" \ - "run update_bootloader_from_sd; "\ - "run update_dtbkernel_from_sd; "\ - "run update_rootfs_from_sd; "\ - "setenv bootcmd 'run bootcmd_nand'; "\ - "saveenv; " \ - "led 3 on; " \ - "echo Finished - Please Power off, REMOVE SDCARD and set boot" \ - "source to NAND\0" \ - "active_workset=1\0" - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_MEMTEST_START 0x80010000 -#define CONFIG_SYS_MEMTEST_END 0x87C00000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical memory map */ -#define PHYS_SDRAM (0x80000000) -#define PHYS_SDRAM_SIZE (SZ_512M) - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#ifdef CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE (SZ_128K) -#define CONFIG_ENV_SIZE (SZ_8K) -#define CONFIG_ENV_OFFSET 0x200000 -#define CONFIG_ENV_SIZE_REDUND (SZ_8K) -#define CONFIG_ENV_OFFSET_REDUND 0x220000 -#endif - -#endif /* __CONFIG_H */ |