diff options
Diffstat (limited to 'include/configs/cgtqmx6eval.h')
| -rw-r--r-- | include/configs/cgtqmx6eval.h | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h deleted file mode 100644 index f109b22..0000000 --- a/include/configs/cgtqmx6eval.h +++ /dev/null @@ -1,220 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * - * Congatec Conga-QEVAl board configuration file. - * - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. - * Based on Freescale i.MX6Q Sabre Lite board configuration file. - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Leo Sartre, <lsartre@adeneo-embedded.com> - */ - -#ifndef __CONFIG_CGTQMX6EVAL_H -#define __CONFIG_CGTQMX6EVAL_H - -#include "mx6_common.h" - -#define CONFIG_MACH_TYPE 4122 - -#ifdef CONFIG_SPL -#include "imx6_spl.h" -#endif - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -/* SPI NOR */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST - -/* Thermal support */ -#define CONFIG_IMX_THERMAL - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_SPEED 100000 - -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ - -#define CONFIG_USBD_HS - -/* Framebuffer */ -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_IMX_HDMI - -/* SATA */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR -#define CONFIG_LBA48 - -/* Ethernet */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 6 -#define CONFIG_PHY_ATHEROS - -/* Command definition */ - -#define CONFIG_MXC_UART_BASE UART2_BASE -#define CONSOLE_DEV "ttymxc1" -#define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_SYS_MMC_ENV_DEV 0 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=zImage\0" \ - "fdtfile=undefined\0" \ - "fdt_addr_r=0x18000000\0" \ - "boot_fdt=try\0" \ - "ip_dyn=yes\0" \ - "console=" CONSOLE_DEV "\0" \ - "dfuspi=dfu 0 sf 0:0:10000000:0\0" \ - "dfu_alt_info_spl=spl raw 0x400\0" \ - "dfu_alt_info_img=u-boot raw 0x10000\0" \ - "dfu_alt_info=spl raw 0x400\0" \ - "bootm_size=0x10000000\0" \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "update_sd_firmware=" \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "if mmc dev ${mmcdev}; then " \ - "if ${get_cmd} ${update_sd_firmware_filename}; then " \ - "setexpr fw_sz ${filesize} / 0x200; " \ - "setexpr fw_sz ${fw_sz} + 1; " \ - "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ - "fi; " \ - "fi\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr_r}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "findfdt="\ - "if test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-qmx6.dtb; fi; " \ - "if test $board_rev = MX6DL ; then " \ - "setenv fdtfile imx6dl-qmx6.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \ - "bootz ${loadaddr} - ${fdt_addr_r}; " \ - "else " \ - "if test ${boot_fdt} = try; then " \ - "bootz; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi; " \ - "else " \ - "bootz; " \ - "fi;\0" \ - "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\ - -#define CONFIG_BOOTCOMMAND \ - "run spilock;" \ - "run findfdt; " \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Environment organization */ -#if defined (CONFIG_ENV_IS_IN_MMC) -#define CONFIG_ENV_OFFSET (6 * 64 * 1024) -#define CONFIG_SYS_MMC_ENV_DEV 0 -#endif - -#define CONFIG_ENV_SIZE (8 * 1024) - -#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) -#define CONFIG_ENV_OFFSET (768 * 1024) -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#endif - -#endif /* __CONFIG_CGTQMX6EVAL_H */ |