diff options
Diffstat (limited to 'include/configs/cm_fx6.h')
| -rw-r--r-- | include/configs/cm_fx6.h | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h deleted file mode 100644 index b957e9c..0000000 --- a/include/configs/cm_fx6.h +++ /dev/null @@ -1,228 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Config file for Compulab CM-FX6 board - * - * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/ - * - * Author: Nikita Kiryanov <nikita@compulab.co.il> - */ - -#ifndef __CONFIG_CM_FX6_H -#define __CONFIG_CM_FX6_H - -#include "mx6_common.h" - -/* Machine config */ -#define CONFIG_SYS_LITTLE_ENDIAN -#define CONFIG_MACH_TYPE 4273 - -/* MMC */ -#define CONFIG_SYS_FSL_USDHC_NUM 3 -#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR - -/* RAM */ -#define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR -#define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* Serial console */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART4_BASE -#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} - -/* SPI flash */ - -/* MTD support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SPI_FLASH_MTD -#endif - -/* Environment */ -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_OFFSET (768 * 1024) - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_addr_r=0x18000000\0" \ - "ramdisk_addr_r=0x13000000\0" \ - "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ - "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ - "fdtfile=undefined\0" \ - "stdin=serial,usbkbd\0" \ - "stdout=serial,vga\0" \ - "stderr=serial,vga\0" \ - "panel=HDMI\0" \ - "autoload=no\0" \ - "uImage=uImage-cm-fx6\0" \ - "zImage=zImage-cm-fx6\0" \ - "kernel=uImage-cm-fx6\0" \ - "dtb=cm-fx6.dtb\0" \ - "console=ttymxc3,115200\0" \ - "ethprime=FEC0\0" \ - "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \ - "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \ - "doboot=bootm ${kernel_addr_r}\0" \ - "doloadfdt=false\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "setboottypez=setenv kernel ${zImage};" \ - "setenv doboot bootz ${kernel_addr_r} - ${fdt_addr_r};" \ - "setenv doloadfdt true;\0" \ - "setboottypem=setenv kernel ${uImage};" \ - "setenv doboot bootm ${kernel_addr_r};" \ - "setenv doloadfdt false;\0"\ - "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ - "sataroot=/dev/sda2 rw rootwait\0" \ - "nandroot=/dev/mtdblock4 rw\0" \ - "nandrootfstype=ubifs\0" \ - "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ - "${video} ${extrabootargs}\0" \ - "sataargs=setenv bootargs console=${console} root=${sataroot} " \ - "${video} ${extrabootargs}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype} " \ - "${video} ${extrabootargs}\0" \ - "nandboot=if run nandloadkernel; then " \ - "run nandloadfdt;" \ - "run setboottypem;" \ - "run storagebootcmd;" \ - "run setboottypez;" \ - "run storagebootcmd;" \ - "fi;\0" \ - "run_eboot=echo Starting EBOOT ...; "\ - "mmc dev 2 && " \ - "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \ - "loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\ - "loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \ - "nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \ - "nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \ - "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \ - "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \ - "setupnandboot=setenv storagetype nand;\0" \ - "storagebootcmd=echo Booting from ${storagetype} ...;" \ - "run ${storagetype}args; run doboot;\0" \ - "trybootk=if run loadkernel; then " \ - "if ${doloadfdt}; then " \ - "run loadfdt;" \ - "fi;" \ - "run storagebootcmd;" \ - "fi;\0" \ - "trybootsmz=" \ - "run setboottypem;" \ - "run trybootk;" \ - "run setboottypez;" \ - "run trybootk;\0" \ - "legacy_bootcmd=" \ - "run setupmmcboot;" \ - "mmc dev ${storagedev};" \ - "if mmc rescan; then " \ - "run trybootsmz;" \ - "fi;" \ - "run setupsataboot;" \ - "if sata init; then " \ - "run trybootsmz;" \ - "fi;" \ - "run setupnandboot;" \ - "run nandboot;\0" \ - "findfdt="\ - "if test $board_name = Utilite && test $board_rev = MX6Q ; then " \ - "setenv fdtfile imx6q-utilite-pro.dtb; fi; " \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine dtb to use; fi; \0" \ - BOOTENV - -#define BOOT_TARGET_DEVICES(func) \ - func(USB, usb, 0) \ - func(MMC, mmc, 2) \ - func(SATA, sata, 0) - -#include <config_distro_bootcmd.h> -#else -#define CONFIG_EXTRA_ENV_SETTINGS -#endif - -/* NAND */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_ONFI_DETECTION -/* APBH DMA is required for NAND support */ -#endif - -/* Ethernet */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_FEC_XCV_TYPE RGMII -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_PHY_ATHEROS -#define CONFIG_ETHPRIME "FEC0" -#define CONFIG_ARP_TIMEOUT 200UL -#define CONFIG_NET_RETRY_COUNT 5 - -/* USB */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_MXC_I2C3_SPEED 400000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_BUS 2 - -/* SATA */ -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_LBA48 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR - -/* Boot */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) -#define CONFIG_SERIAL_TAG - -/* misc */ -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) - -/* SPL */ -#include "imx6_spl.h" - -/* Display */ -#define CONFIG_IMX_HDMI - -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SOURCE -#define CONFIG_VIDEO_BMP_RLE8 - -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO - -/* EEPROM */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 - -#endif /* __CONFIG_CM_FX6_H */ |