1 files changed, 0 insertions, 150 deletions
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
deleted file mode 100644
index 54f2cea..0000000
--- a/include/configs/cm_t335.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Config file for Compulab CM-T335 board
- *
- * Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
- *
- * Author: Ilya Ledvich <ilya@compulab.co.il>
- */
-
-#ifndef __CONFIG_CM_T335_H
-#define __CONFIG_CM_T335_H
-
-#define CONFIG_CM_T335
-
-#include <configs/ti_am335x_common.h>
-
-#undef CONFIG_MAX_RAM_BANK_SIZE
-#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 512MB */
-
-#define CONFIG_MACH_TYPE		MACH_TYPE_CM_T335
-
-/* Clock Defines */
-#define V_OSCK				25000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#ifndef CONFIG_SPL_BUILD
-#define MMCARGS \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
-	"mmcrootfstype=ext4\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0"
-
-#define NANDARGS \
-	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"nandroot=ubi0:rootfs rw\0" \
-	"nandrootfstype=ubifs\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype} " \
-		"ubi.mtd=${rootfs_name}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nboot ${loadaddr} nand0 900000; " \
-		"bootm ${loadaddr}\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=82000000\0" \
-	"console=ttyO0,115200n8\0" \
-	"rootfs_name=rootfs\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-	MMCARGS \
-	NANDARGS
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loaduimage; then " \
-				"run mmcboot; " \
-			"else run nandboot; " \
-			"fi; " \
-		"fi; " \
-	"else run nandboot; fi"
-#endif /* CONFIG_SPL_BUILD */
-
-#define CONFIG_TIMESTAMP
-#define CONFIG_SYS_AUTOLOAD		"no"
-
-/* Serial console configuration */
-
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_COM1		0x44e09000	/* UART0 */
-#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
-#define CONFIG_SYS_I2C_EEPROM_BUS	0
-
-/* SPL */
-
-/* Network. */
-#define CONFIG_PHY_ATHEROS
-
-/* NAND support */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
-					 10, 11, 12, 13, 14, 15, 16, 17, \
-					 18, 19, 20, 21, 22, 23, 24, 25, \
-					 26, 27, 28, 29, 30, 31, 32, 33, \
-					 34, 35, 36, 37, 38, 39, 40, 41, \
-					 42, 43, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56, 57, }
-
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
-
-#undef CONFIG_SYS_NAND_U_BOOT_OFFS
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x200000
-
-#define CONFIG_ENV_OFFSET		0x300000 /* environment starts here */
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x500000
-#endif
-
-/* GPIO pin + bank to pin ID mapping */
-#define GPIO_PIN(_bank, _pin)		((_bank << 5) + _pin)
-
-/* Status LED */
-/* Status LED polarity is inversed, so init it in the "off" state */
-
-/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#define CONFIG_SYS_EEPROM_SIZE			256
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * Enable PCA9555 at I2C0-0x26.
- * First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
- */
-#define CONFIG_PCA953X
-#define CONFIG_SYS_I2C_PCA953X_ADDR	0x26
-#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x26, 16} }
-#endif /* CONFIG_SPL_BUILD */
-
-#endif	/* __CONFIG_CM_T335_H */
-