1 files changed, 0 insertions, 126 deletions
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
deleted file mode 100644
index 1314cf9..0000000
--- a/include/configs/cm_t43.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * cm_t43.h
- *
- * Copyright (C) 2015 Compulab, Ltd.
- */
-
-#ifndef __CONFIG_CM_T43_H
-#define __CONFIG_CM_T43_H
-
-#define CONFIG_CM_T43
-#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2GB */
-#define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
-
-#include <asm/arch/omap.h>
-
-/* Serial support */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK		48000000
-#define CONFIG_SYS_NS16550_COM1		0x44e09000
-#if !defined(CONFIG_SPL_DM) || !defined(CONFIG_DM_SERIAL)
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#endif
-
-/* NAND support */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
-					 10, 11, 12, 13, 14, 15, 16, 17, \
-					 18, 19, 20, 21, 22, 23, 24, 25, \
-					 26, 27, 28, 29, 30, 31, 32, 33, \
-					 34, 35, 36, 37, 38, 39, 40, 41, \
-					 42, 43, 44, 45, 46, 47, 48, 49, \
-					 50, 51, 52, 53, 54, 55, 56, 57, }
-
-/* CPSW Ethernet support */
-#define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_PHY_ATHEROS
-#define CONFIG_SYS_RX_ETH_BUFFER	64
-
-/* USB support */
-#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_AM437X_USB2PHY2_HOST
-
-/* Power */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_TPS65218
-
-/* Enabling L2 Cache */
-#define CONFIG_SYS_L2_PL310
-#define CONFIG_SYS_PL310_BASE		0x48242000
-
-/*
- * Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-#define CONFIG_HSMMC2_8BIT
-
-#include <configs/ti_armv7_omap.h>
-#undef CONFIG_SYS_MONITOR_LEN
-
-#define V_OSCK				24000000  /* Clock output from T2 */
-#define V_SCLK				(V_OSCK)
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x80200000\0" \
-	"fdtaddr=0x81200000\0" \
-	"bootm_size=0x8000000\0" \
-	"autoload=no\0" \
-	"console=ttyO0,115200n8\0" \
-	"fdtfile=am437x-sb-som-t43.dtb\0" \
-	"kernel=zImage-cm-t43\0" \
-	"bootscr=bootscr.img\0" \
-	"emmcroot=/dev/mmcblk0p2 rw\0" \
-	"emmcrootfstype=ext4 rootwait\0" \
-	"emmcargs=setenv bootargs console=${console} " \
-		"root=${emmcroot} " \
-		"rootfstype=${emmcrootfstype}\0" \
-	"loadbootscript=load mmc 0 ${loadaddr} ${bootscr}\0" \
-	"bootscript=echo Running bootscript from mmc ...; " \
-		"source ${loadaddr}\0" \
-	"emmcboot=echo Booting from emmc ... && " \
-		"run emmcargs && " \
-		"load mmc 1 ${loadaddr} ${kernel} && " \
-		"load mmc 1 ${fdtaddr} ${fdtfile} && " \
-		"bootz ${loadaddr} - ${fdtaddr}\0"
-
-#define CONFIG_BOOTCOMMAND \
-	"mmc dev 0; " \
-	"if mmc rescan; then " \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"fi; " \
-	"fi; " \
-	"mmc dev 1; " \
-	"if mmc rescan; then " \
-		"run emmcboot; " \
-	"fi;"
-
-/* SPL defines. */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
-
-/* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
-#define CONFIG_SYS_EEPROM_SIZE			256
-
-#endif	/* __CONFIG_CM_T43_H */