diff options
Diffstat (limited to 'include/configs/colibri-imx6ull.h')
| -rw-r--r-- | include/configs/colibri-imx6ull.h | 166 |
1 files changed, 0 insertions, 166 deletions
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h deleted file mode 100644 index de94eb9..0000000 --- a/include/configs/colibri-imx6ull.h +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018-2019 Toradex AG - * - * Configuration settings for the Colibri iMX6ULL module. - * - * based on colibri_imx7.h - */ - -#ifndef __COLIBRI_IMX6ULL_CONFIG_H -#define __COLIBRI_IMX6ULL_CONFIG_H - -#include "mx6_common.h" -#define CONFIG_IOMUX_LPSR - -#define PHYS_SDRAM_SIZE SZ_512M - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) - -/* Network */ -#define CONFIG_TFTP_TSIZE - -/* ENET1 */ -#define IMX_FEC_BASE ENET2_BASE_ADDR - -/* MMC Config */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_FSL_USDHC_NUM 1 - -/* I2C configs */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - -#define FDT_FILE "imx6ull-colibri${variant}-${fdt_board}.dtb" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ - "fdt_addr_r=0x82100000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "kernel_addr_r=0x81000000\0" \ - "pxefile_addr_r=0x87100000\0" \ - "ramdisk_addr_r=0x82200000\0" \ - "scriptaddr=0x87000000\0" - -#define NFS_BOOTCMD \ - "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ - "nfsboot=run setup; " \ - "setenv bootargs ${defargs} ${nfsargs} " \ - "${setupargs} ${vidargs}; echo Booting from NFS...;" \ - "dhcp ${kernel_addr_r} && " \ - "tftp ${fdt_addr_r} " FDT_FILE " && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#define UBI_BOOTCMD \ - "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \ - "ubi.fm_autoconvert=1\0" \ - "ubiboot=run setup; " \ - "setenv bootargs ${defargs} ${ubiargs} " \ - "${setupargs} ${vidargs}; echo Booting from NAND...; " \ - "ubi part ubi &&" \ - "ubi read ${kernel_addr_r} kernel && " \ - "ubi read ${fdt_addr_r} dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#define CONFIG_BOOTCOMMAND "run ubiboot; " \ - "setenv fdtfile " FDT_FILE " && run distro_bootcmd;" - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - BOOTENV \ - MEM_LAYOUT_ENV_SETTINGS \ - NFS_BOOTCMD \ - UBI_BOOTCMD \ - "console=ttymxc0\0" \ - "defargs=user_debug=30\0" \ - "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ - "fdt_board=eval-v3\0" \ - "fdt_fixup=;\0" \ - "ip_dyn=yes\0" \ - "kernel_file=zImage\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ - "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ - "${board}/flash_eth.img && source ${loadaddr}\0" \ - "setsdupdate=mmc rescan && setenv interface mmc && " \ - "fatload ${interface} 0:1 ${loadaddr} " \ - "${board}/flash_blk.img && source ${loadaddr}\0" \ - "setup=setenv setupargs " \ - "console=tty1 console=${console}" \ - ",${baudrate}n8 ${memargs} consoleblank=0\0" \ - "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ - "setusbupdate=usb start && setenv interface usb && " \ - "fatload ${interface} 0:1 ${loadaddr} " \ - "${board}/flash_blk.img && source ${loadaddr}\0" \ - "splashpos=m,m\0" \ - "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ - "vidargs=video=mxsfb:640x480M-16@60" - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x08000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#if defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#endif - -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */ -#define CONFIG_SYS_NAND_BASE -1 -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -#define CONFIG_IMX_THERMAL - -#define CONFIG_USBD_HS - -/* USB Device Firmware Update support */ -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M -#define DFU_DEFAULT_POLL_TIMEOUT 300 - -#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_MXS -#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#endif - -#endif /* __COLIBRI_IMX6ULL_CONFIG_H */ |