diff options
Diffstat (limited to 'include/configs/colibri_imx7.h')
| -rw-r--r-- | include/configs/colibri_imx7.h | 260 |
1 files changed, 0 insertions, 260 deletions
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h deleted file mode 100644 index c2d9829..0000000 --- a/include/configs/colibri_imx7.h +++ /dev/null @@ -1,260 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2016-2018 Toradex AG - * - * Configuration settings for the Colibri iMX7 module. - * - * based on mx7dsabresd.h: - * Copyright (C) 2015 Freescale Semiconductor, Inc. - */ - -#ifndef __COLIBRI_IMX7_CONFIG_H -#define __COLIBRI_IMX7_CONFIG_H - -#include "mx7_common.h" - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) - -/* Network */ -#define CONFIG_FEC_MXC -#define CONFIG_FEC_XCV_TYPE RMII -#define CONFIG_ETHPRIME "FEC" -#define CONFIG_FEC_MXC_PHYADDR 0 - -#define CONFIG_TFTP_TSIZE - -/* ENET1 */ -#define IMX_FEC_BASE ENET_IPS_BASE_ADDR - -/* MMC Config*/ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND -#define CONFIG_SYS_FSL_USDHC_NUM 1 -#elif CONFIG_TARGET_COLIBRI_IMX7_EMMC -#define CONFIG_SYS_FSL_USDHC_NUM 2 -#endif - -/* I2C configs */ -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_IPADDR 192.168.10.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.168.10.1 - -#ifndef PARTS_DEFAULT -/* Define the default GPT table for eMMC */ -#define PARTS_DEFAULT \ - /* Android partitions */ \ - "partitions_android=" \ - "uuid_disk=${uuid_gpt_disk};" \ - "name=boot,start=1M,size=32M,uuid=${uuid_gpt_boot};" \ - "name=environment,size=4M,uuid=${uuid_gpt_environment};" \ - "name=recovery,size=16M,uuid=${uuid_gpt_recovery};" \ - "name=system,size=1536M,uuid=${uuid_gpt_system};" \ - "name=cache,size=512M,uuid=${uuid_gpt_cache};" \ - "name=device,size=8M,uuid=${uuid_gpt_device};" \ - "name=misc,size=4M,uuid=${uuid_gpt_misc};" \ - "name=datafooter,size=2M,uuid=${uuid_gpt_datafooter};" \ - "name=metadata,size=2M,uuid=${uuid_gpt_metadata};" \ - "name=persistdata,size=2M,uuid=${uuid_gpt_persistdata};" \ - "name=userdata,size=128M,uuid=${uuid_gpt_userdata};" \ - "name=fbmisc,size=-,uuid=${uuid_gpt_fbmisc}\0" -#endif /* PARTS_DEFAULT */ - -#define EMMC_ANDROID_BOOTCMD \ - "android_args=androidboot.storage_type=emmc\0" \ - PARTS_DEFAULT \ - "android_fdt_addr=0x83700000\0" \ - "android_mmc_dev=0\0" \ - "m4binary=rpmsg_imu_freertos.elf\0" \ - "androidboot=ext4load mmc 0:a ${loadaddr} media/0/${m4binary}; "\ - "bootaux ${loadaddr}; " \ - "setenv loadaddr 0x88000000; " \ - "setenv bootm_boot_mode sec;" \ - "setenv bootargs androidboot.serialno=${serial#} " \ - "$android_args; " \ - "part start mmc ${android_mmc_dev} boot boot_start; " \ - "part size mmc ${android_mmc_dev} boot boot_size; " \ - "mmc read ${loadaddr} ${boot_start} ${boot_size}; " \ - "part start mmc ${android_mmc_dev} environment env_start; " \ - "part size mmc ${android_mmc_dev} environment env_size; " \ - "mmc read ${android_fdt_addr} ${env_start} ${env_size}; " \ - "bootm ${loadaddr} ${loadaddr} ${android_fdt_addr}\0 " - -#define EMMC_BOOTCMD \ - "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} ro " \ - "rootfstype=ext4 rootwait\0" \ - "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \ - "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ - "${vidargs}; echo Booting from internal eMMC chip...; " \ - "run m4boot && " \ - "load mmc ${emmcdev}:${emmcbootpart} ${fdt_addr_r} " \ - "${soc}-colibri-emmc-${fdt_board}.dtb && " \ - "load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \ - "${boot_file} && run fdt_fixup && " \ - "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "emmcbootpart=1\0" \ - "emmcdev=0\0" \ - "emmcfinduuid=part uuid mmc ${emmcdev}:${emmcrootpart} uuid\0" \ - "emmcrootpart=2\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ - "fdt_addr_r=0x82000000\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ - "kernel_addr_r=0x81000000\0" \ - "ramdisk_addr_r=0x82100000\0" \ - "scriptaddr=0x82500000\0" - -#define NFS_BOOTCMD \ - "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ - "nfsboot=run setup; " \ - "setenv bootargs ${defargs} ${nfsargs} " \ - "${setupargs} ${vidargs}; echo Booting from NFS...;" \ - "dhcp ${kernel_addr_r} && " \ - "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#define UBI_BOOTCMD \ - "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ - "ubi.fm_autoconvert=1\0" \ - "ubiboot=run setup; " \ - "setenv bootargs ${defargs} ${ubiargs} " \ - "${setupargs} ${vidargs}; echo Booting from NAND...; " \ - "ubi part ubi && run m4boot && " \ - "ubi read ${kernel_addr_r} kernel && " \ - "ubi read ${fdt_addr_r} dtb && " \ - "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \ - "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;" -#define MODULE_EXTRA_ENV_SETTINGS \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - UBI_BOOTCMD -#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) -#define CONFIG_BOOTCOMMAND \ - "setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb && run distro_bootcmd;" -#define MODULE_EXTRA_ENV_SETTINGS \ - "variant=-emmc\0" \ - EMMC_BOOTCMD \ - EMMC_ANDROID_BOOTCMD -#endif - -#if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#elif defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC) -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(MMC, mmc, 1) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#endif -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - BOOTENV \ - MEM_LAYOUT_ENV_SETTINGS \ - NFS_BOOTCMD \ - MODULE_EXTRA_ENV_SETTINGS \ - "boot_file=zImage\0" \ - "console=ttymxc0\0" \ - "defargs=\0" \ - "fdt_board=eval-v3\0" \ - "fdt_fixup=;\0" \ - "m4boot=;\0" \ - "ip_dyn=yes\0" \ - "kernel_file=zImage\0" \ - "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ - "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ - "${board}/flash_eth.img && source ${loadaddr}\0" \ - "setsdupdate=mmc rescan && setenv interface mmc && " \ - "fatload ${interface} 0:1 ${loadaddr} " \ - "${board}/flash_blk.img && source ${loadaddr}\0" \ - "setup=setenv setupargs " \ - "console=tty1 console=${console}" \ - ",${baudrate}n8 ${memargs} consoleblank=0\0" \ - "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \ - "setusbupdate=usb start && setenv interface usb && " \ - "fatload ${interface} 0:1 ${loadaddr} " \ - "${board}/flash_blk.img && source ${loadaddr}\0" \ - "splashpos=m,m\0" \ - "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \ - "updlevel=2\0" - -/* Miscellaneous configurable options */ - -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000) - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_SYS_HZ 1000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* environment organization */ - -#if defined(CONFIG_ENV_IS_IN_MMC) -/* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE + \ - CONFIG_TDX_CFG_BLOCK_OFFSET) -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_SYS_MMC_ENV_PART 1 -#elif defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_OFFSET (28 * CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#endif - -#ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES -#endif - -/* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET - -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 - -#define CONFIG_IMX_THERMAL - -#define CONFIG_USBD_HS - -/* USB Device Firmware Update support */ -#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M -#define DFU_DEFAULT_POLL_TIMEOUT 300 - -#if defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_MXS -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_LOGO -#endif - -#endif |