diff options
Diffstat (limited to 'include/configs/controlcenterdc.h')
| -rw-r--r-- | include/configs/controlcenterdc.h | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h deleted file mode 100644 index f6d5328..0000000 --- a/include/configs/controlcenterdc.h +++ /dev/null @@ -1,187 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Stefan Roese <sr@denx.de> - * Copyright (C) 2016 Mario Six <mario.six@gdsys.cc> - */ - -#ifndef _CONFIG_CONTROLCENTERDC_H -#define _CONFIG_CONTROLCENTERDC_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_CUSTOMER_BOARD_SUPPORT - -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_BOARD_LATE_INIT - -/* - * TEXT_BASE needs to be below 16MiB, since this area is scrubbed - * for DDR ECC byte filling in the SPL before loading the main - * U-Boot into it. - */ - -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ - -#define CONFIG_LOADADDR 1000000 - -/* - * SDIO/MMC Card Configuration - */ -#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE - -/* - * SATA/SCSI/AHCI configuration - */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - -/* USB/EHCI configuration */ -#define CONFIG_EHCI_IS_TDI - -/* Environment in SPI NOR flash */ -#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ - -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ - -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_SCAN_SHOW -#endif - -/* - * Software (bit-bang) MII driver configuration - */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ -#define CONFIG_BITBANGMII_MULTI - -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (160 << 10) - -#if defined(CONFIG_SECURED_MODE_IMAGE) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x2614) -#else -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x30) -#endif - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((212 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH -/* SPL related SPI defines */ -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD -/* SPL related MMC defines */ -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#define CONFIG_SYS_MMC_U_BOOT_OFFS (168 << 10) -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512) -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_HOSTNAME "ccdc" -#define CONFIG_ROOTPATH "/opt/nfsroot" -#define CONFIG_BOOTFILE "ccdc.img" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth1\0" \ - "consoledev=ttyS1\0" \ - "u-boot=u-boot.bin\0" \ - "bootfile_addr=1000000\0" \ - "keyprogram_addr=3000000\0" \ - "keyprogram_file=keyprogram.img\0" \ - "fdtfile=controlcenterdc.dtb\0" \ - "load=tftpboot ${loadaddr} ${u-boot}\0" \ - "mmcdev=0:2\0" \ - "update=sf probe 1:0;" \ - " sf erase 0 +${filesize};" \ - " sf write ${fileaddr} 0 ${filesize}\0" \ - "upd=run load update\0" \ - "fdt_high=0x10000000\0" \ - "initrd_high=0x10000000\0" \ - "loadkeyprogram=tpm flush_keys;" \ - " mmc rescan;" \ - " ext4load mmc ${mmcdev} ${keyprogram_addr} ${keyprogram_file};"\ - " source ${keyprogram_addr}:script@1\0" \ - "gpio1=gpio@22_25\0" \ - "gpio2=A29\0" \ - "blinkseq='0 0 0 0 2 0 2 2 3 1 3 1 0 0 2 2 3 1 3 3 2 0 2 2 3 1 1 1 " \ - "2 0 2 2 3 1 3 1 0 0 2 0 3 3 3 1 2 0 0 0 3 1 1 1 0 0 0 0'\0" \ - "bootfail=for i in ${blinkseq}; do" \ - " if test $i -eq 0; then" \ - " gpio clear ${gpio1}; gpio set ${gpio2};" \ - " elif test $i -eq 1; then" \ - " gpio clear ${gpio1}; gpio clear ${gpio2};" \ - " elif test $i -eq 2; then" \ - " gpio set ${gpio1}; gpio set ${gpio2};" \ - " else;" \ - " gpio clear ${gpio1}; gpio set ${gpio2};" \ - " fi; sleep 0.12; done\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "tftpboot ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define CONFIG_MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define CONFIG_BOOTCOMMAND \ - "if env exists keyprogram; then;" \ - " setenv keyprogram; run nfsboot;" \ - " fi;" \ - " run dobootfail" - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#endif /* _CONFIG_CONTROLCENTERDC_H */ |