1 files changed, 0 insertions, 130 deletions
diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h
deleted file mode 100644
index 4f99805..0000000
--- a/include/configs/dart_6ul.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Board configuration file for Variscite DART-6UL Evaluation Kit
- * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com>
- */
-#ifndef __DART_6UL_H
-#define __DART_6UL_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* SPL options */
-#include "imx6_spl.h"
-
-/* NAND pin conflicts with usdhc2 */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_FSL_USDHC_NUM        1
-#else
-#define CONFIG_SYS_FSL_USDHC_NUM        2
-#endif
-
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_ENET_DEV		0
-
-#if (CONFIG_FEC_ENET_DEV == 0)
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR		0x1
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_ETHPRIME			"eth0"
-#elif (CONFIG_FEC_ENET_DEV == 1)
-#define IMX_FEC_BASE			ENET2_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR		0x3
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_ETHPRIME			"eth1"
-#endif
-#endif
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(16 * SZ_1M)
-
-/* Environment settings */
-#define CONFIG_ENV_SIZE			SZ_8K
-#define CONFIG_ENV_OFFSET		(14 * SZ_64K)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND	\
-	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-
-/* Environment in SD */
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_SYS_MMC_ENV_PART		0
-#define MMC_ROOTFS_DEV			0
-#define MMC_ROOTFS_PART			2
-
-/* Console configs */
-#define CONFIG_MXC_UART_BASE		UART1_BASE
-
-/* MMC Configs */
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* I2C configs */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED		100000
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ			1000
-
-/* Physical Memory Map */
-#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE			SZ_512M
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-
-#define CONFIG_IMX_THERMAL
-
-#define ENV_MMC \
-	"mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \
-	"mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \
-	"fitpart=1\0" \
-	"bootdelay=3\0" \
-	"silent=1\0" \
-	"optargs=rw rootwait\0" \
-	"mmcautodetect=yes\0" \
-	"mmcrootfstype=ext4\0" \
-	"mmcfit_name=fitImage\0" \
-	"mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \
-		    "${mmcfit_name}\0" \
-	"mmcargs=setenv bootargs " \
-		"root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \
-		"console=${console} rootfstype=${mmcrootfstype}\0" \
-	"mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"fdt_high=0xffffffff\0" \
-	"console=ttymxc0,115200n8\0" \
-	"addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
-	"fit_addr=0x82000000\0" \
-	ENV_MMC
-
-#define CONFIG_BOOTCOMMAND		"run mmc_mmc_fit"
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0) \
-	func(MMC, mmc, 1) \
-	func(DHCP, dhcp, na)
-
-#include <config_distro_bootcmd.h>
-#endif /* __DART_6UL_H */