diff options
Diffstat (limited to 'include/configs/db-88f6820-amc.h')
| -rw-r--r-- | include/configs/db-88f6820-amc.h | 82 |
1 files changed, 0 insertions, 82 deletions
diff --git a/include/configs/db-88f6820-amc.h b/include/configs/db-88f6820-amc.h deleted file mode 100644 index 61b91dd..0000000 --- a/include/configs/db-88f6820-amc.h +++ /dev/null @@ -1,82 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Stefan Roese <sr@denx.de> - */ - -#ifndef _CONFIG_DB_88F6820_AMC_H -#define _CONFIG_DB_88F6820_AMC_H - -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ - -/* - * Commands configuration - */ - -/* USB/EHCI configuration */ -#define CONFIG_EHCI_IS_TDI - -/* Environment in SPI NOR flash */ -#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ - -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ - -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_SCAN_SHOW -#endif - -/* NAND */ -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0x10000000\0" \ - "initrd_high=0x10000000\0" - -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * - * MMC is not populated on this board. - * NAND support may be added in the future. - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH -/* SPL related SPI defines */ -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" -#undef CONFIG_SYS_MAXARGS -#define CONFIG_SYS_MAXARGS 96 - -#endif /* _CONFIG_DB_88F6820_AMC_H */ |