diff options
Diffstat (limited to 'include/configs/db-88f6820-gp.h')
| -rw-r--r-- | include/configs/db-88f6820-gp.h | 106 |
1 files changed, 0 insertions, 106 deletions
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h deleted file mode 100644 index 900c962..0000000 --- a/include/configs/db-88f6820-gp.h +++ /dev/null @@ -1,106 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Stefan Roese <sr@denx.de> - */ - -#ifndef _CONFIG_DB_88F6820_GP_H -#define _CONFIG_DB_88F6820_GP_H - -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ - -/* - * Commands configuration - */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MVTWSI -#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE -#define CONFIG_SYS_I2C_SLAVE 0x0 -#define CONFIG_SYS_I2C_SPEED 100000 - -/* - * SDIO/MMC Card Configuration - */ -#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE - -/* - * SATA/SCSI/AHCI configuration - */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) - -/* USB/EHCI configuration */ -#define CONFIG_EHCI_IS_TDI - -/* Environment in SPI NOR flash */ -#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ -#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ -#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ - -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ - -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_SCAN_SHOW -#endif - -/* Keep device tree and initrd in lower memory so the kernel can access them */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fdt_high=0x10000000\0" \ - "initrd_high=0x10000000\0" - -/* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH - -/* Defines for SPL */ -#define CONFIG_SPL_SIZE (140 << 10) -#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) - -#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) -#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MALLOC_SIMPLE -#endif - -#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) -#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH -/* SPL related SPI defines */ -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD -/* SPL related MMC defines */ -#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) -#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS -#ifdef CONFIG_SPL_BUILD -#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ -#endif -#endif - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#endif /* _CONFIG_DB_88F6820_GP_H */ |