diff options
Diffstat (limited to 'include/configs/devkit3250.h')
| -rw-r--r-- | include/configs/devkit3250.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h deleted file mode 100644 index 16031c1..0000000 --- a/include/configs/devkit3250.h +++ /dev/null @@ -1,190 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Embest/Timll DevKit3250 board configuration file - * - * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com> - */ - -#ifndef __CONFIG_DEVKIT3250_H__ -#define __CONFIG_DEVKIT3250_H__ - -/* SoC and board defines */ -#include <linux/sizes.h> -#include <asm/arch/cpu.h> - -#define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT3250 - -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Memory configurations - */ -#define CONFIG_SYS_MALLOC_LEN SZ_1M -#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE -#define CONFIG_SYS_SDRAM_SIZE SZ_64M -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M) - -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - - GENERATED_GBL_DATA_SIZE) - -/* - * Serial Driver - */ -#define CONFIG_SYS_LPC32XX_UART 5 /* UART5 */ - -/* - * DMA - */ -#if !defined(CONFIG_SPL_BUILD) -#define CONFIG_DMA_LPC32XX -#endif - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_LPC32XX -#define CONFIG_SYS_I2C_SPEED 100000 - -/* - * GPIO - */ -#define CONFIG_LPC32XX_GPIO - -/* - * SSP/SPI - */ -#define CONFIG_LPC32XX_SSP_TIMEOUT 100000 - -/* - * Ethernet - */ -#define CONFIG_RMII -#define CONFIG_PHY_SMSC -#define CONFIG_LPC32XX_ETH -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -/* - * NOR Flash - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 71 -#define CONFIG_SYS_FLASH_BASE EMC_CS0_BASE -#define CONFIG_SYS_FLASH_SIZE SZ_4M - -/* - * NAND controller - */ -#define CONFIG_SYS_NAND_BASE SLC_NAND_BASE -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } - -/* - * NAND chip timings - */ -#define CONFIG_LPC32XX_NAND_SLC_WDR_CLKS 14 -#define CONFIG_LPC32XX_NAND_SLC_WWIDTH 66666666 -#define CONFIG_LPC32XX_NAND_SLC_WHOLD 200000000 -#define CONFIG_LPC32XX_NAND_SLC_WSETUP 50000000 -#define CONFIG_LPC32XX_NAND_SLC_RDR_CLKS 14 -#define CONFIG_LPC32XX_NAND_SLC_RWIDTH 66666666 -#define CONFIG_LPC32XX_NAND_SLC_RHOLD 200000000 -#define CONFIG_LPC32XX_NAND_SLC_RSETUP 50000000 - -#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 -#define CONFIG_SYS_NAND_PAGE_SIZE NAND_LARGE_BLOCK_PAGE_SIZE - -/* - * USB - */ -#define CONFIG_USB_OHCI_LPC32XX -#define CONFIG_USB_ISP1301_I2C_ADDR 0x2d - -/* - * U-Boot General Configurations - */ -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * Pass open firmware flat tree - */ - -/* - * Environment - */ -#define CONFIG_ENV_SIZE SZ_128K -#define CONFIG_ENV_OFFSET 0x000A0000 - -#define CONFIG_BOOTCOMMAND \ - "dhcp; " \ - "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; " \ - "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; " \ - "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; " \ - "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; " \ - "bootm ${loadaddr} - ${dtbaddr}" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autoload=no\0" \ - "ethaddr=00:01:90:00:C0:81\0" \ - "dtbaddr=0x81000000\0" \ - "nfsroot=/opt/projects/images/vladimir/oe/devkit3250/rootfs\0" \ - "tftpdir=vladimir/oe/devkit3250\0" \ - "userargs=oops=panic\0" - -/* - * U-Boot Commands - */ - -/* - * Boot Linux - */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_LOADADDR 0x80008000 - -/* - * SPL specific defines - */ -/* SPL will be executed at offset 0 */ - -/* SPL will use SRAM as stack */ -#define CONFIG_SPL_STACK 0x0000FFF8 - -/* Use the framework and generic lib */ - -/* SPL will use serial */ - -/* SPL loads an image from NAND */ -#define CONFIG_SPL_NAND_RAW_ONLY -#define CONFIG_SPL_NAND_DRIVERS - -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SOFTECC - -#define CONFIG_SPL_MAX_SIZE 0x20000 -#define CONFIG_SPL_PAD_TO CONFIG_SPL_MAX_SIZE - -/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x60000 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE - -/* See common/spl/spl.c spl_set_header_raw_uboot() */ -#define CONFIG_SYS_MONITOR_LEN CONFIG_SYS_NAND_U_BOOT_SIZE - -/* - * Include SoC specific configuration - */ -#include <asm/arch/config.h> - -#endif /* __CONFIG_DEVKIT3250_H__*/ |