diff options
Diffstat (limited to 'include/configs/eb_cpu5282.h')
| -rw-r--r-- | include/configs/eb_cpu5282.h | 254 |
1 files changed, 0 insertions, 254 deletions
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h deleted file mode 100644 index e266e1f..0000000 --- a/include/configs/eb_cpu5282.h +++ /dev/null @@ -1,254 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123) - * - * (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> - */ - -#ifndef _CONFIG_EB_CPU5282_H_ -#define _CONFIG_EB_CPU5282_H_ - -#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP - -/*----------------------------------------------------------------------* - * High Level Configuration Options (easy to change) * - *----------------------------------------------------------------------*/ - -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) - -#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ - -#define CONFIG_BOOTCOMMAND "printenv" - -/*----------------------------------------------------------------------* - * Options * - *----------------------------------------------------------------------*/ - -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_RESET_TO_RETRY -#define CONFIG_SPLASH_SCREEN - -#define CONFIG_HW_WATCHDOG - -#define STATUS_LED_ACTIVE 0 - -/*----------------------------------------------------------------------* - * Configuration for environment * - * Environment is in the second sector of the first 256k of flash * - *----------------------------------------------------------------------*/ - -#define CONFIG_ENV_ADDR 0xFF040000 -#define CONFIG_ENV_SECT_SIZE 0x00020000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE - -/* - * Command line configuration. - */ - -#define CONFIG_MCFTMR - -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_LOAD_ADDR 0x20000 - -#define CONFIG_SYS_MEMTEST_START 0x100000 -#define CONFIG_SYS_MEMTEST_END 0x400000 -/*#define CONFIG_SYS_DRAM_TEST 1 */ -#undef CONFIG_SYS_DRAM_TEST - -/*----------------------------------------------------------------------* - * Clock and PLL Configuration * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ - -/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ - -#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ - -/*----------------------------------------------------------------------* - * Network * - *----------------------------------------------------------------------*/ - -#define CONFIG_MCFFEC -#define CONFIG_MII_INIT 1 -#define CONFIG_SYS_DISCOVER_PHY -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -#define CONFIG_SYS_FEC0_PINMUX 0 -#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -#define MCFFEC_TOUT_LOOP 50000 - -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/*------------------------------------------------------------------------- - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - *-----------------------------------------------------------------------*/ - -#define CONFIG_SYS_MBAR 0x40000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - *-----------------------------------------------------------------------*/ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE0 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */ - -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0 -#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0 - -#define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 - -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 - -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000 - -#define CONFIG_SYS_FLASH_SIZE 16*1024*1024 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ - CF_CACR_CEIB | CF_CACR_DBWE | \ - CF_CACR_EUSP) - -/*----------------------------------------------------------------------- - * Memory bank definitions - */ - -#define CONFIG_SYS_CS0_BASE 0xFF000000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 - -#define CONFIG_SYS_CS2_BASE 0xE0000000 -#define CONFIG_SYS_CS2_CTRL 0x00001980 -#define CONFIG_SYS_CS2_MASK 0x000F0001 - -#define CONFIG_SYS_CS3_BASE 0xE0100000 -#define CONFIG_SYS_CS3_CTRL 0x00001980 -#define CONFIG_SYS_CS3_MASK 0x000F0001 - -/*----------------------------------------------------------------------- - * Port configuration - */ -#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ -#define CONFIG_SYS_PADDR 0x0000000 -#define CONFIG_SYS_PADAT 0x0000000 - -#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CONFIG_SYS_PBDDR 0x0000000 -#define CONFIG_SYS_PBDAT 0x0000000 - -#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */ -#define CONFIG_SYS_PCDDR 0x0000000 -#define CONFIG_SYS_PCDAT 0x0000000 - -#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CONFIG_SYS_PCDDR 0x0000000 -#define CONFIG_SYS_PCDAT 0x0000000 - -#define CONFIG_SYS_PASPAR 0x0F0F -#define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F -#define CONFIG_SYS_DDRUA 0x05 -#define CONFIG_SYS_PJPAR 0xFF - -/*----------------------------------------------------------------------- - * I2C - */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL - -#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300 -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - -#define CONFIG_SYS_FSL_I2C_SPEED 100000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0 - -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1338 -#define CONFIG_I2C_RTC_ADDR 0x68 -#endif - -/*----------------------------------------------------------------------- - * VIDEO configuration - */ - -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_VCXK 1 - -#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2 -#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1 -#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE - -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001 - -#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT -#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR -#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002 - -#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT -#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR -#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004 - -#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE -#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE -#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2 - -#endif /* CONFIG_VIDEO */ -#endif /* _CONFIG_M5282EVB_H */ -/*---------------------------------------------------------------------*/ |