diff options
Diffstat (limited to 'include/configs/etamin.h')
| -rw-r--r-- | include/configs/etamin.h | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/include/configs/etamin.h b/include/configs/etamin.h deleted file mode 100644 index 726f8a5..0000000 --- a/include/configs/etamin.h +++ /dev/null @@ -1,216 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/include/configs/am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - */ - -#ifndef __CONFIG_ETAMIN_H -#define __CONFIG_ETAMIN_H - -#include "siemens-am33x-common.h" -/* NAND specific changes for etamin due to different page size */ -#undef CONFIG_SYS_NAND_PAGE_SIZE -#undef CONFIG_SYS_NAND_OOBSIZE -#undef CONFIG_SYS_NAND_BLOCK_SIZE -#undef CONFIG_SYS_NAND_ECCPOS -#undef CONFIG_SYS_NAND_U_BOOT_OFFS -#undef CONFIG_SYS_ENV_SECT_SIZE -#undef CONFIG_ENV_OFFSET -#undef CONFIG_NAND_OMAP_ECCSCHEME -#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW - -#define CONFIG_ENV_OFFSET 0x980000 -#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ -#define CONFIG_SYS_NAND_PAGE_SIZE 4096 -#define CONFIG_SYS_NAND_OOBSIZE 224 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * CONFIG_SYS_NAND_PAGE_SIZE) -#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ - 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ - 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ - 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ - 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ - 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ - 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ - 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ - 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ - 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ - 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ - 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ - 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ - 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ - 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ - 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ - 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ - 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ - 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ - 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ - } - -#undef CONFIG_SYS_NAND_ECCSIZE -#undef CONFIG_SYS_NAND_ECCBYTES -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 26 - -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000 - -#define CONFIG_SYS_NAND_MAX_CHIPS 1 - -#undef CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_MAX_NAND_DEVICE 3 -#define CONFIG_SYS_NAND_BASE2 (0x18000000) /* physical address */ -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ - CONFIG_SYS_NAND_BASE2} - -#define CONFIG_SYS_NAND_ONFI_DETECTION -#define DDR_PLL_FREQ 303 - -/* FWD Button = 27 - * SRV Button = 87 */ -#define BOARD_DFU_BUTTON_GPIO 27 -#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ -/* In dfu mode keep led1 on */ -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - "button_dfu0=27\0" \ - "button_dfu1=87\0" \ - "led0=3,0,1\0" \ - "led1=4,0,0\0" \ - "led2=5,0,1\0" \ - "led3=87,0,1\0" \ - "led4=60,0,1\0" \ - "led5=63,0,1\0" - -/* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define EEPROM_ADDR_DDR3 0x90 -#define EEPROM_ADDR_CHIP 0x120 - -#define CONFIG_PHY_SMSC - -#define CONFIG_FACTORYSET - -/* use both define to compile a SPL compliance test */ -/* -#define CONFIG_SPL_CMT -#define CONFIG_SPL_CMT_DEBUG -*/ - -/* nedded by compliance test in read mode */ -#if defined(CONFIG_SPL_CMT) -#define CONFIG_SYS_DCACHE_OFF -#endif - -/* Define own nand partitions */ -#define CONFIG_ENV_OFFSET_REDUND 0xB80000 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - - - -#undef COMMON_ENV_DFU_ARGS -#define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \ - "setenv bootargs ${bootargs};" \ - "mtdparts default;" \ - "draco_led 1;" \ - "dfu 0 mtd 0;" \ - "draco_led 0;\0" \ - -#undef DFU_ALT_INFO_NAND_V2 -#define DFU_ALT_INFO_NAND_V2 \ - "spl mtddev;" \ - "spl.backup1 mtddev;" \ - "spl.backup2 mtddev;" \ - "spl.backup3 mtddev;" \ - "u-boot mtddev;" \ - "u-boot.env0 mtddev;" \ - "u-boot.env1 mtddev;" \ - "rootfs mtddevubi" \ - -#undef CONFIG_ENV_SETTINGS_NAND_V2 -#define CONFIG_ENV_SETTINGS_NAND_V2 \ - "nand_active_ubi_vol=rootfs_a\0" \ - "rootfs_name=rootfs\0" \ - "kernel_name=uImage\0"\ - "nand_root_fs_type=ubifs rootwait=1\0" \ - "nand_args=run bootargs_defaults;" \ - "mtdparts default;" \ - "setenv ${partitionset_active} true;" \ - "if test -n ${A}; then " \ - "setenv nand_active_ubi_vol ${rootfs_name}_a;" \ - "fi;" \ - "if test -n ${B}; then " \ - "setenv nand_active_ubi_vol ${rootfs_name}_b;" \ - "fi;" \ - "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ - "ubi.mtd=rootfs,${ubi_off};" \ - "setenv bootargs ${bootargs} " \ - "root=${nand_root} noinitrd ${mtdparts} " \ - "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ - "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ - "=mtdoops\0" \ - COMMON_ENV_DFU_ARGS \ - "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \ - COMMON_ENV_NAND_BOOT \ - "ubi part rootfs ${ubi_off};" \ - "ubifsmount ubi0:${nand_active_ubi_vol};" \ - "ubifsload ${kloadaddr} boot/${kernel_name};" \ - "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \ - "bootm ${kloadaddr} - ${loadaddr}\0" \ - "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \ - "bootm ${kloadaddr} - ${loadaddr}\0" \ - COMMON_ENV_NAND_CMDS - -#ifndef CONFIG_SPL_BUILD - -#define CONFIG_NAND_CS_INIT -#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800 -#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00 -#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807 -#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e -#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80 -#define CONFIG_MTD_CONCAT - -/* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=etamin\0" \ - "ubi_off=4096\0"\ - "nand_img_size=0x400000\0" \ - "optargs=\0" \ - "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 - -#ifndef CONFIG_RESTORE_FLASH - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - - -#else -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif -#endif /* CONFIG_SPL_BUILD */ -#endif /* ! __CONFIG_ETAMIN_H */ |