diff options
Diffstat (limited to 'include/configs/gw_ventana.h')
| -rw-r--r-- | include/configs/gw_ventana.h | 341 |
1 files changed, 0 insertions, 341 deletions
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h deleted file mode 100644 index a27627e..0000000 --- a/include/configs/gw_ventana.h +++ /dev/null @@ -1,341 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2013 Gateworks Corporation - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* SPL */ -/* Location in NAND to read U-Boot from */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M) - -/* Falcon Mode */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000 - -/* Falcon Mode - NAND support: args@17MB kernel@18MB */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M) - -/* Falcon Mode - MMC support: args@1MB kernel@2MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ - -#include "imx6_spl.h" /* common IMX6 SPL configuration */ -#include "mx6_common.h" - -#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */ - -/* Serial ATAG */ -#define CONFIG_SERIAL_TAG - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) - -/* Init Functions */ - -/* Driver Model */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_DM_GPIO -#define CONFIG_DM_THERMAL -#endif - -/* Thermal */ -#define CONFIG_IMX_THERMAL - -/* Serial */ -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART2_BASE - -#ifdef CONFIG_SPI_FLASH - -/* SPI */ -#ifdef CONFIG_CMD_SF - #define CONFIG_SPI_FLASH_MTD - /* GPIO 3-19 (21248) */ -#endif - -#elif defined(CONFIG_SPL_NAND_SUPPORT) -/* Enable NAND support */ -#ifdef CONFIG_CMD_NAND - #define CONFIG_SYS_MAX_NAND_DEVICE 1 - #define CONFIG_SYS_NAND_BASE 0x40000000 - #define CONFIG_SYS_NAND_5_ADDR_CYCLE - #define CONFIG_SYS_NAND_ONFI_DETECTION - - /* DMA stuff, needed for GPMI/MXS NAND support */ -#endif - -#endif /* CONFIG_SPI_FLASH */ - -/* I2C Configs */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_I2C_GSC 0 -#define CONFIG_I2C_EDID - -/* MMC Configs */ -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -/* - * SATA Configs - */ -#ifdef CONFIG_CMD_SATA - #define CONFIG_SYS_SATA_MAX_DEVICE 1 - #define CONFIG_DWC_AHSATA_PORT_ID 0 - #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR - #define CONFIG_LBA48 -#endif - -/* - * PCI express - */ -#ifdef CONFIG_CMD_PCI -#define CONFIG_PCI_SCAN_SHOW -#define CONFIG_PCI_FIXUP_DEV -#define CONFIG_PCIE_IMX -#endif - -/* - * PMIC - */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 -#define CONFIG_POWER_LTC3676 -#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c - -/* Various command support */ -#define CONFIG_CMD_UNZIP /* gzwrite */ - -/* Ethernet support */ -#define CONFIG_FEC_MXC -#define IMX_FEC_BASE ENET_BASE_ADDR -#define CONFIG_FEC_XCV_TYPE RGMII -#define CONFIG_FEC_MXC_PHYADDR 0 -#define CONFIG_ARP_TIMEOUT 200UL - -/* USB Configs */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ -#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USBD_HS -#define CONFIG_NETCONSOLE - -/* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO -#define CONFIG_IMX_HDMI -#define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */ - -/* Miscellaneous configurable options */ -#define CONFIG_HWCONFIG - -/* Memory configuration */ -#define CONFIG_SYS_MEMTEST_START 0x10000000 -#define CONFIG_SYS_MEMTEST_END 0x10010000 -#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 - -/* Physical Memory Map */ -#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -/* - * MTD Command for mtdparts - */ - -/* Persistent Environment Config */ -#if defined(CONFIG_ENV_IS_IN_MMC) - #define CONFIG_SYS_MMC_ENV_DEV 0 - #define CONFIG_SYS_MMC_ENV_PART 1 - #define CONFIG_ENV_OFFSET (709 * SZ_1K) - #define CONFIG_ENV_SIZE (128 * SZ_1K) - #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K)) -#elif defined(CONFIG_ENV_IS_IN_NAND) - #define CONFIG_ENV_OFFSET (16 * SZ_1M) - #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K) - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K)) - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) - #define CONFIG_ENV_OFFSET (512 * SZ_1K) - #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K) - #define CONFIG_ENV_SIZE (8 * SZ_1K) -#endif - -/* Environment */ -#define CONFIG_IPADDR 192.168.1.1 -#define CONFIG_SERVERIP 192.168.1.146 - -#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "pcidisable=1\0" \ - "splashpos=m,m\0" \ - "usb_pgood_delay=2000\0" \ - "console=ttymxc1\0" \ - "bootdevs=usb mmc sata flash\0" \ - "hwconfig=_UNKNOWN_\0" \ - "video=\0" \ - \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ - "disk=0\0" \ - "part=1\0" \ - \ - "fdt_high=0xffffffff\0" \ - "fdt_addr=0x18000000\0" \ - "initrd_high=0xffffffff\0" \ - "fixfdt=" \ - "fdt addr ${fdt_addr}\0" \ - "bootdir=boot\0" \ - "loadfdt=" \ - "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \ - "echo Loaded DTB from ${bootdir}/${fdt_file}; " \ - "run fixfdt; " \ - "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \ - "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \ - "run fixfdt; " \ - "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \ - "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \ - "run fixfdt; " \ - "fi\0" \ - \ - "fs=ext4\0" \ - "script=6x_bootscript-ventana\0" \ - "loadscript=" \ - "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \ - "source ${loadaddr}; " \ - "fi\0" \ - \ - "uimage=uImage\0" \ - "mmc_root=mmcblk0p1\0" \ - "mmc_boot=" \ - "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \ - "mmc dev ${disk} && mmc rescan && " \ - "setenv dtype mmc; run loadscript; " \ - "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ - "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/${mmc_root} rootfstype=${fs} " \ - "rootwait rw ${video} ${extra}; " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "bootm; " \ - "fi; " \ - "fi\0" \ - \ - "sata_boot=" \ - "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \ - "sata init && " \ - "setenv dtype sata; run loadscript; " \ - "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ - "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/sda1 rootfstype=${fs} " \ - "rootwait rw ${video} ${extra}; " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "bootm; " \ - "fi; " \ - "fi\0" \ - "usb_boot=" \ - "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \ - "usb start && usb dev ${disk} && " \ - "setenv dtype usb; run loadscript; " \ - "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ - "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/sda1 rootfstype=${fs} " \ - "rootwait rw ${video} ${extra}; " \ - "if run loadfdt; then " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "bootm; " \ - "fi; " \ - "fi\0" - -#ifdef CONFIG_SPI_FLASH - #define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \ - "image_uboot=ventana/u-boot_spi.imx\0" \ - \ - "spi_koffset=0x90000\0" \ - "spi_klen=0x200000\0" \ - \ - "spi_updateuboot=echo Updating uboot from " \ - "${serverip}:${image_uboot}...; " \ - "tftpboot ${loadaddr} ${image_uboot} && " \ - "sf probe && sf erase 0 80000 && " \ - "sf write ${loadaddr} 400 ${filesize}\0" \ - "spi_update=echo Updating OS from ${serverip}:${image_os} " \ - "to ${spi_koffset} ...; " \ - "tftp ${loadaddr} ${image_os} && " \ - "sf probe && " \ - "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \ - \ - "flash_boot=" \ - "if sf probe && " \ - "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \ - "setenv bootargs console=${console},${baudrate} " \ - "root=/dev/mtdblock3 " \ - "rootfstype=squashfs,jffs2 " \ - "${video} ${extra}; " \ - "bootm; " \ - "fi\0" -#else - #define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_EXTRA_ENV_SETTINGS_COMMON \ - \ - "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \ - "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \ - "tftp ${loadaddr} ${image_rootfs} && " \ - "nand erase.part rootfs && " \ - "nand write ${loadaddr} rootfs ${filesize}\0" \ - \ - "flash_boot=" \ - "setenv fsload 'ubifsload'; " \ - "ubi part rootfs; " \ - "if ubi check boot; then " \ - "ubifsmount ubi0:boot; " \ - "setenv root ubi0:rootfs ubi.mtd=2 " \ - "rootfstype=squashfs,ubifs; " \ - "setenv bootdir; " \ - "elif ubi check rootfs; then " \ - "ubifsmount ubi0:rootfs; " \ - "setenv root ubi0:rootfs ubi.mtd=2 " \ - "rootfstype=ubifs; " \ - "fi; " \ - "setenv dtype nand; run loadscript; " \ - "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \ - "setenv bootargs console=${console},${baudrate} " \ - "root=${root} ${video} ${extra}; " \ - "if run loadfdt; then " \ - "ubifsumount; " \ - "bootm ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "ubifsumount; bootm; " \ - "fi; " \ - "fi\0" -#endif - -#define CONFIG_BOOTCOMMAND \ - "for btype in ${bootdevs}; do " \ - "echo; echo Attempting ${btype} boot...; " \ - "if run ${btype}_boot; then; fi; " \ - "done" - -#endif /* __CONFIG_H */ |