diff options
Diffstat (limited to 'include/configs/imx8mm_evk.h')
| -rw-r--r-- | include/configs/imx8mm_evk.h | 153 |
1 files changed, 0 insertions, 153 deletions
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h deleted file mode 100644 index a9d99ec..0000000 --- a/include/configs/imx8mm_evk.h +++ /dev/null @@ -1,153 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2019 NXP - */ - -#ifndef __IMX8MM_EVK_H -#define __IMX8MM_EVK_H - -#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_CSF_SIZE SZ_8K -#endif - -#define CONFIG_SPL_MAX_SIZE (148 * 1024) -#define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SYS_UBOOT_BASE \ - (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_STACK 0x920000 -#define CONFIG_SPL_BSS_START_ADDR 0x910000 -#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x42200000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */ - -/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */ -#define CONFIG_MALLOC_F_ADDR 0x930000 -/* For RAW image gives a error info not panic */ -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#endif - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=Image.itb\0" \ - "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200\0" \ - "fdt_addr=0x43000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "boot_fit=try\0" \ - "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "initrd_addr=0x43800000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ - "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ - "bootm ${loadaddr}; " \ - "else " \ - "if run loadfdt; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${loadaddr} ${image}; " \ - "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \ - "bootm ${loadaddr}; " \ - "else " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi;" - -/* Link Definitions */ -#define CONFIG_LOADADDR 0x40480000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#define CONFIG_ENV_OVERWRITE -#if defined(CONFIG_ENV_IS_IN_MMC) -#define CONFIG_ENV_OFFSET (64 * SZ_64K) -#endif -#define CONFIG_ENV_SIZE SZ_4K -#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */ -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN SZ_32M - -#define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define PHYS_SDRAM 0x40000000 -#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - -#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR - -/* Monitor Command Prompt */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) - -/* USDHC */ -#define CONFIG_FSL_USDHC - -#define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_SYS_I2C_SPEED 100000 - -#endif |