diff options
Diffstat (limited to 'include/configs/imx8qm_mek.h')
| -rw-r--r-- | include/configs/imx8qm_mek.h | 161 |
1 files changed, 0 insertions, 161 deletions
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h deleted file mode 100644 index 2b8f85d..0000000 --- a/include/configs/imx8qm_mek.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef __IMX8QM_MEK_H -#define __IMX8QM_MEK_H - -#include <linux/sizes.h> -#include <asm/arch/imx-regs.h> - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SPL_MAX_SIZE (124 * 1024) -#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 - -#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" -#define CONFIG_SPL_STACK 0x013E000 -#define CONFIG_SPL_BSS_START_ADDR 0x00128000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x1000 /* 4 KB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000 /* 12 KB */ -#define CONFIG_SERIAL_LPUART_BASE 0x5a060000 -#define CONFIG_MALLOC_F_ADDR 0x00120000 - -#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE - -#define CONFIG_SPL_ABORT_ON_RAW_IMAGE - -#define CONFIG_OF_EMBED -#endif - -#define CONFIG_REMAKE_ELF - -#define CONFIG_BOARD_EARLY_INIT_F - -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV -#undef CONFIG_CMD_IMLS - -#undef CONFIG_CMD_CRC32 - -#define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define USDHC1_BASE_ADDR 0x5B010000 -#define USDHC2_BASE_ADDR 0x5B020000 -#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "image=Image\0" \ - "panel=NULL\0" \ - "console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \ - "fdt_addr=0x83000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "boot_fdt=try\0" \ - "fdt_file=imx8qm-mek.dtb\0" \ - "initrd_addr=0x83800000\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ - "mmcautodetect=yes\0" \ - "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ - "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if run loadfdt; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "else " \ - "echo wait for boot; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${loadaddr} ${image}; " \ - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "booti ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi; " \ - "else " \ - "booti; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - -/* Link Definitions */ -#define CONFIG_LOADADDR 0x80280000 - -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -#define CONFIG_SYS_INIT_SP_ADDR 0x80200000 - -/* Default environment is in SD */ -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_OFFSET (64 * SZ_64K) -#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */ - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ -#define CONFIG_SYS_MMC_ENV_DEV 1 /* USDHC2 */ -#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ -#define CONFIG_SYS_FSL_USDHC_NUM 2 - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define PHYS_SDRAM_1 0x80000000 -#define PHYS_SDRAM_2 0x880000000 -#define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ -#define PHYS_SDRAM_2_SIZE 0x100000000 /* 4 GB */ - -/* Serial */ -#define CONFIG_BAUDRATE 115200 - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY 8000000 /* 8MHz */ - -/* Networking */ -#define CONFIG_FEC_XCV_TYPE RGMII -#define FEC_QUIRK_ENET_MAC - -#endif /* __IMX8QM_MEK_H */ |