diff options
Diffstat (limited to 'include/configs/j721e_evm.h')
| -rw-r--r-- | include/configs/j721e_evm.h | 116 |
1 files changed, 0 insertions, 116 deletions
diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h deleted file mode 100644 index 639d87a..0000000 --- a/include/configs/j721e_evm.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration header file for K3 J721E EVM - * - * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/ - * Lokesh Vutla <lokeshvutla@ti.com> - */ - -#ifndef __CONFIG_J721E_EVM_H -#define __CONFIG_J721E_EVM_H - -#include <linux/sizes.h> -#include <config_distro_bootcmd.h> -#include <environment/ti/mmc.h> -#include <environment/ti/k3_rproc.h> -#include <environment/ti/ufs.h> - -#define CONFIG_ENV_SIZE (128 << 10) - -/* DDR Configuration */ -#define CONFIG_SYS_SDRAM_BASE1 0x880000000 - -/* SPL Loader Configuration */ -#ifdef CONFIG_TARGET_J721E_A72_EVM -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \ - CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE) -#else -/* - * Maximum size in memory allocated to the SPL BSS. Keep it as tight as - * possible (to allow the build to go through), as this directly affects - * our memory footprint. The less we use for BSS the more we have available - * for everything else. - */ -#define CONFIG_SPL_BSS_MAX_SIZE 0xA000 -/* - * Link BSS to be within SPL in a dedicated region located near the top of - * the MCU SRAM, this way making it available also before relocation. Note - * that we are not using the actual top of the MCU SRAM as there is a memory - * location filled in by the boot ROM that we want to read out without any - * interference from the C context. - */ -#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\ - CONFIG_SPL_BSS_MAX_SIZE) -/* Set the stack right below the SPL BSS section */ -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR -/* Configure R5 SPL post-relocation malloc pool in DDR */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M -#endif - -#ifdef CONFIG_SYS_K3_SPL_ATF -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin" -#endif - -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE - -#define CONFIG_SYS_BOOTM_LEN SZ_64M -#define CONFIG_CQSPI_REF_CLK 133333333 - -/* HyperFlash related configuration */ -#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 - -/* U-Boot general configuration */ -#define EXTRA_ENV_J721E_BOARD_SETTINGS \ - "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ - "findfdt=setenv fdtfile ${default_device_tree}\0" \ - "loadaddr=0x80080000\0" \ - "fdtaddr=0x82000000\0" \ - "overlayaddr=0x83000000\0" \ - "name_kern=Image\0" \ - "console=ttyS2,115200n8\0" \ - "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \ - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0" - -/* U-Boot MMC-specific configuration */ -#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ - "boot=mmc\0" \ - "mmcdev=1\0" \ - "bootpart=1:2\0" \ - "bootdir=/boot\0" \ - "rd_spec=-\0" \ - "init_mmc=run args_all args_mmc\0" \ - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ - "get_overlay_mmc=" \ - "fdt address ${fdtaddr};" \ - "fdt resize 0x100000;" \ - "for overlay in $name_overlays;" \ - "do;" \ - "load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay} && " \ - "fdt apply ${overlayaddr};" \ - "done;\0" \ - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \ - "${bootdir}/${name_kern}\0" - -#ifdef DEFAULT_RPROCS -#undef DEFAULT_RPROCS -#endif -#define DEFAULT_RPROCS "" \ - "3 /lib/firmware/j7-main-r5f0_1-fw " \ - "4 /lib/firmware/j7-main-r5f1_0-fw " \ - "6 /lib/firmware/j7-c66_0-fw " \ - "7 /lib/firmware/j7-c66_1-fw " \ - "8 /lib/firmware/j7-c71_0-fw " - -/* Incorporate settings into the U-Boot environment */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_MMC_TI_ARGS \ - EXTRA_ENV_J721E_BOARD_SETTINGS \ - EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \ - EXTRA_ENV_RPROC_SETTINGS \ - DEFAULT_UFS_TI_ARGS - -/* Now for the remaining common defines */ -#include <configs/ti_armv7_common.h> - -#endif /* __CONFIG_J721E_EVM_H */ |