diff options
Diffstat (limited to 'include/configs/km_kirkwood.h')
| -rw-r--r-- | include/configs/km_kirkwood.h | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h deleted file mode 100644 index 6fce83c..0000000 --- a/include/configs/km_kirkwood.h +++ /dev/null @@ -1,147 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar <prafulla@marvell.com> - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2011-2012 - * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com - * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com - */ - -/* - * for linking errors see - * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html - */ - -#ifndef _CONFIG_KM_KIRKWOOD_H -#define _CONFIG_KM_KIRKWOOD_H - -/* KM_KIRKWOOD */ -#if defined(CONFIG_KM_KIRKWOOD) -#define CONFIG_HOSTNAME "km_kirkwood" -#define CONFIG_KM_DISABLE_PCIE - -/* KM_KIRKWOOD_PCI */ -#elif defined(CONFIG_KM_KIRKWOOD_PCI) -#define CONFIG_HOSTNAME "km_kirkwood_pci" -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE - -/* KM_KIRKWOOD_128M16 */ -#elif defined(CONFIG_KM_KIRKWOOD_128M16) -#define CONFIG_HOSTNAME "km_kirkwood_128m16" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_DISABLE_PCIE - -/* KM_NUSA / KM_SUGP1 */ -#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) - -# if defined(CONFIG_KM_NUSA) -#define CONFIG_HOSTNAME "kmnusa" -# elif defined(CONFIG_KM_SUGP1) -#define CONFIG_HOSTNAME "kmsugp1" -#define KM_PCIE_RESET_MPP7 -#endif - -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg - -/* KM_MGCOGE3UN */ -#elif defined(CONFIG_KM_MGCOGE3UN) -#define CONFIG_HOSTNAME "mgcoge3un" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg -#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" -#define CONFIG_KM_DISABLE_PCIE - -/* KMCOGE5UN */ -#elif defined(CONFIG_KM_COGE5UN) -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg -#define CONFIG_HOSTNAME "kmcoge5un" -#define CONFIG_KM_DISABLE_PCIE - -/* KM_SUV31 */ -#elif defined(CONFIG_KM_SUV31) -#define CONFIG_HOSTNAME "kmsuv31" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" -#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE -#else -#error ("Board unsupported") -#endif - -/* include common defines/options for all arm based Keymile boards */ -#include "km/km_arm.h" - -#if defined(CONFIG_KM_PIGGY4_88E6352) -/* - * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via - * an Marvell 88E6352 simple switch. - * In this case we have to change the default settings for the etherent mac. - * There is NO ethernet phy. The ARM and Switch are conencted directly over - * RGMII in MAC-MAC mode - * In this case 1GBit full duplex and autoneg off - */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - MVGBE_FORCE_LINK_PASS | \ - MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - MVGBE_ADV_NO_FLOW_CTRL | \ - MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - MVGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - MVGBE_DO_NOT_FORCE_LINK_FAIL | \ - MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ - MVGBE_DTE_ADV_0 | \ - MVGBE_MIIPHY_MAC_MODE | \ - MVGBE_AUTO_NEG_NO_CHANGE | \ - MVGBE_MAX_RX_PACKET_1552BYTE | \ - MVGBE_CLR_EXT_LOOPBACK | \ - MVGBE_SET_FULL_DUPLEX_MODE | \ - MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ - MVGBE_SET_GMII_SPEED_TO_1000 |\ - MVGBE_SET_MII_SPEED_TO_100) - -#endif - -#ifdef CONFIG_KM_PIGGY4_88E6061 -/* - * Some keymile boards like mgcoge3un have their PIGGY4 connected via - * an Marvell 88E6061 simple switch. - * In this case we have to change the default settings for the - * ethernet phy connected to the kirkwood. - * In this case 100MB full duplex and autoneg off - */ -#define PORT_SERIAL_CONTROL_VALUE ( \ - MVGBE_FORCE_LINK_PASS | \ - MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \ - MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \ - MVGBE_ADV_NO_FLOW_CTRL | \ - MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \ - MVGBE_FORCE_BP_MODE_NO_JAM | \ - (1 << 9) /* Reserved bit has to be 1 */ | \ - MVGBE_DO_NOT_FORCE_LINK_FAIL | \ - MVGBE_DIS_AUTO_NEG_SPEED_GMII | \ - MVGBE_DTE_ADV_0 | \ - MVGBE_MIIPHY_MAC_MODE | \ - MVGBE_AUTO_NEG_NO_CHANGE | \ - MVGBE_MAX_RX_PACKET_1552BYTE | \ - MVGBE_CLR_EXT_LOOPBACK | \ - MVGBE_SET_FULL_DUPLEX_MODE | \ - MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\ - MVGBE_SET_GMII_SPEED_TO_10_100 |\ - MVGBE_SET_MII_SPEED_TO_100) -#endif - -#ifdef CONFIG_KM_DISABLE_PCIE -#undef CONFIG_KIRKWOOD_PCIE_INIT -#endif - -#endif /* _CONFIG_KM_KIRKWOOD */ |