1 files changed, 0 insertions, 112 deletions
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
deleted file mode 100644
index cb32938..0000000
--- a/include/configs/ls1012a2g5rdb.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2017 NXP
- */
-
-#ifndef __LS1012A2G5RDB_H__
-#define __LS1012A2G5RDB_H__
-
-#include "ls1012a_common.h"
-
-/* DDR */
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	1
-#define CONFIG_SYS_SDRAM_SIZE		0x40000000
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-/* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA				AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN			1
-#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_SYS_MEMTEST_START	0x80000000
-#define CONFIG_SYS_MEMTEST_END		0x9fffffff
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"verify=no\0"				\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x00f00000\0"			\
-	"kernel_addr=0x01000000\0"		\
-	"kernelheader_addr=0x800000\0"		\
-	"scriptaddr=0x80000000\0"		\
-	"scripthdraddr=0x80080000\0"		\
-	"fdtheader_addr_r=0x80100000\0"		\
-	"kernelheader_addr_r=0x80200000\0"	\
-	"kernel_addr_r=0x81000000\0"		\
-	"fdt_addr_r=0x90000000\0"		\
-	"load_addr=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"		\
-	"kernelheader_size=0x40000\0"		\
-	"console=ttyS0,115200\0"		\
-	BOOTENV					\
-	"boot_scripts=ls1012ardb_boot.scr\0"	\
-	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
-	"scan_dev_for_boot_part="		\
-	     "part list ${devtype} ${devnum} devplist; "	\
-	     "env exists devplist || setenv devplist 1; "	\
-	     "for distro_bootpart in ${devplist}; do "		\
-		  "if fstype ${devtype} "			\
-		      "${devnum}:${distro_bootpart} "		\
-		      "bootfstype; then "			\
-		      "run scan_dev_for_boot; "	\
-		  "fi; "			\
-	      "done\0"				\
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
-	"boot_a_script="				  \
-		"load ${devtype} ${devnum}:${distro_bootpart} "  \
-			"${scriptaddr} ${prefix}${script}; "    \
-		"env exists secureboot && load ${devtype} "     \
-			"${devnum}:${distro_bootpart} "		\
-			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
-			"&& esbc_validate ${scripthdraddr};"    \
-		"source ${scriptaddr}\0"	  \
-	"installer=load mmc 0:2 $load_addr "	\
-		   "/flex_installer_arm64.itb; "	\
-		   "bootm $load_addr#$board\0"	\
-	"qspi_bootcmd=echo Trying load from qspi..;"	\
-		"sf probe && sf read $load_addr "	\
-		"$kernel_addr $kernel_size; env exists secureboot "	\
-		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
-		"bootm $load_addr#$board\0"
-
-#undef CONFIG_BOOTCOMMAND
-#ifdef CONFIG_TFABOOT
-#undef QSPI_NOR_BOOTCOMMAND
-#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
-			     "env exists secureboot && esbc_halt;"
-#else
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
-			   "env exists secureboot && esbc_halt;"
-#endif
-#endif
-
-#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
-#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
-
-#include <asm/fsl_secure_boot.h>
-
-#endif /* __LS1012A2G5RDB_H__ */