diff options
Diffstat (limited to 'include/configs/ls1021atsn.h')
| -rw-r--r-- | include/configs/ls1021atsn.h | 250 |
1 files changed, 0 insertions, 250 deletions
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h deleted file mode 100644 index b011cb2..0000000 --- a/include/configs/ls1021atsn.h +++ /dev/null @@ -1,250 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 - * Copyright 2016-2018 NXP Semiconductors - * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - -#define CONFIG_SYS_FSL_CLK - -#define CONFIG_DEEP_SLEEP - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) - -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE - -/* XHCI Support - enabled by default */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 - -#define CONFIG_SYS_CLK_FREQ 100000000 -#define CONFIG_DDR_CLK_FREQ 100000000 - -#define DDR_SDRAM_CFG 0x470c0008 -#define DDR_CS0_BNDS 0x008000bf -#define DDR_CS0_CONFIG 0x80014302 -#define DDR_TIMING_CFG_0 0x50550004 -#define DDR_TIMING_CFG_1 0xbcb38c56 -#define DDR_TIMING_CFG_2 0x0040d120 -#define DDR_TIMING_CFG_3 0x010e1000 -#define DDR_TIMING_CFG_4 0x00000001 -#define DDR_TIMING_CFG_5 0x03401400 -#define DDR_SDRAM_CFG_2 0x00401010 -#define DDR_SDRAM_MODE 0x00061c60 -#define DDR_SDRAM_MODE_2 0x00180000 -#define DDR_SDRAM_INTERVAL 0x18600618 -#define DDR_DDR_WRLVL_CNTL 0x8655f605 -#define DDR_DDR_WRLVL_CNTL_2 0x05060607 -#define DDR_DDR_WRLVL_CNTL_3 0x05050505 -#define DDR_DDR_CDR1 0x80040000 -#define DDR_DDR_CDR2 0x00000001 -#define DDR_SDRAM_CLK_CNTL 0x02000000 -#define DDR_DDR_ZQ_CNTL 0x89080600 -#define DDR_CS0_CONFIG_2 0 -#define DDR_SDRAM_CFG_MEM_EN 0x80000000 -#define SDRAM_CFG2_D_INIT 0x00000010 -#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 -#define SDRAM_CFG2_FRC_SR 0x80000000 -#define SDRAM_CFG_BI 0x00000001 - -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SYS_FSL_PBL_PBI \ - "board/freescale/ls1021atsn/ls102xa_pbi.cfg" -#endif - -#ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_FSL_PBL_RCW \ - "board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg" - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_SECURE_BOOT */ - -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SPL_PAD_TO 0x1c000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw U-Boot image instead of FIT image. - */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ -#endif - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x80000000 -#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_CHIP_SELECTS_PER_CTRL 4 - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_SERIAL -#ifndef CONFIG_DM_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#endif -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#define CONFIG_BAUDRATE 115200 - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ - -/* EEPROM */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* QSPI */ -#define FSL_QSPI_FLASH_SIZE (1 << 24) -#define FSL_QSPI_FLASH_NUM 2 - -/* PCIe */ -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 /* PCIE controller 2 */ -#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" -#ifdef CONFIG_PCI -#define CONFIG_PCI_SCAN_SHOW -#endif - -#define CONFIG_LAYERSCAPE_NS_ACCESS -#define COUNTER_FREQUENCY 12500000 - -#define CONFIG_HWCONFIG -#define HWCONFIG_BUFFER_SIZE 256 - -#define CONFIG_FSL_DEVICE_DISABLE - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ - "initrd_high=0xffffffff\0" \ - "fdt_high=0xffffffff\0" \ - "fdt_addr=0x64f00000\0" \ - "kernel_addr=0x61000000\0" \ - "kernelheader_addr=0x60800000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "kernel_addr_r=0x80008000\0" \ - "kernelheader_size=0x40000\0" \ - "fdt_addr_r=0x8f000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "load_addr=0x80008000\0" \ - "kernel_size=0x2800000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ - "kernelhdr_size_sd=0x10\0" \ - BOOTENV \ - "boot_scripts=ls1021atsn_boot.scr\0" \ - "boot_script_hdr=hdr_ls1021atsn_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "run scan_dev_for_extlinux; " \ - "done;" \ - "\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ - "sf probe && sf read $load_addr " \ - "$kernel_addr $kernel_size; env exists secureboot " \ - "&& sf read $kernelheader_addr_r $kernelheader_addr " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ - "bootm $load_addr#$board\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo && mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - -#define CONFIG_LS102XA_STREAM_ID - -#define CONFIG_SYS_INIT_SP_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -/* Environment */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x300000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 0x20000 -#elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x300000 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#endif - -#define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */ - -#endif |