diff options
Diffstat (limited to 'include/configs/ls1028aqds.h')
| -rw-r--r-- | include/configs/ls1028aqds.h | 160 |
1 files changed, 0 insertions, 160 deletions
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h deleted file mode 100644 index b0e9441..0000000 --- a/include/configs/ls1028aqds.h +++ /dev/null @@ -1,160 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2019 NXP - */ - -#ifndef __LS1028A_QDS_H -#define __LS1028A_QDS_H - -#include "ls1028a_common.h" - -#define CONFIG_SYS_CLK_FREQ 100000000 -#define CONFIG_DDR_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) - -/* DDR */ -#define CONFIG_DIMM_SLOTS_PER_CTLR 2 - -#define CONFIG_QIXIS_I2C_ACCESS - -/* - * QIXIS Definitions - */ -#define CONFIG_FSL_QIXIS - -#ifdef CONFIG_FSL_QIXIS -#define QIXIS_BASE 0x7fb00000 -#define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 -#define QIXIS_LBMAP_SWITCH 1 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 5 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x00 -#define QIXIS_LBMAP_SD 0x00 -#define QIXIS_LBMAP_EMMC 0x00 -#define QIXIS_LBMAP_QSPI 0x00 -#define QIXIS_RCW_SRC_SD 0x8 -#define QIXIS_RCW_SRC_EMMC 0x9 -#define QIXIS_RCW_SRC_QSPI 0xf -#define QIXIS_RST_CTL_RESET 0x31 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#define QIXIS_RST_FORCE_MEM 0x01 - -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ - CSPR_PORT_SIZE_8 | \ - CSPR_MSEL_GPCM | \ - CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ - CSOR_NOR_NOR_MODE_AVD_NOR | \ - CSOR_NOR_TRHZ_80) -#endif - -/* RTC */ -#define CONFIG_SYS_RTC_BUS_NUM 1 -#define I2C_MUX_CH_RTC 0xB - -/* Store environment at top of flash */ -#define CONFIG_ENV_SIZE 0x2000 - -#ifdef CONFIG_SPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE -#else -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#endif - -/* SATA */ -#define CONFIG_SCSI_AHCI_PLAT - -#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 -#ifndef CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT2 -#endif -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -/* DSPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#endif - -#ifndef SPL_NO_ENV -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "board=ls1028aqds\0" \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "ramdisk_addr=0x800000\0" \ - "ramdisk_size=0x2000000\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "fdt_addr=0x00f00000\0" \ - "kernel_addr=0x01000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "load_addr=0xa0000000\0" \ - "kernel_addr_r=0x81000000\0" \ - "fdt_addr_r=0x90000000\0" \ - "ramdisk_addr_r=0xa0000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x800000\0" \ - "kernel_load=0xa0000000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ - "kernelhdr_size_sd=0x10\0" \ - "console=ttyS0,115200\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - BOOTENV \ - "boot_scripts=ls1028aqds_boot.scr\0" \ - "boot_script_hdr=hdr_ls1028aqds_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr} " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" \ - "emmc_bootcmd=echo Trying load from EMMC ..;" \ - "mmcinfo; mmc dev 1; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" -#endif -#endif /* __LS1028A_QDS_H */ |