diff options
Diffstat (limited to 'include/configs/ls1043a_common.h')
| -rw-r--r-- | include/configs/ls1043a_common.h | 336 |
1 files changed, 0 insertions, 336 deletions
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h deleted file mode 100644 index 70447a2..0000000 --- a/include/configs/ls1043a_common.h +++ /dev/null @@ -1,336 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 Freescale Semiconductor - */ - -#ifndef __LS1043A_COMMON_H -#define __LS1043A_COMMON_H - -/* SPL build */ -#ifdef CONFIG_SPL_BUILD -#define SPL_NO_FMAN -#define SPL_NO_DSPI -#define SPL_NO_PCIE -#define SPL_NO_ENV -#define SPL_NO_MISC -#define SPL_NO_USB -#define SPL_NO_SATA -#define SPL_NO_QE -#define SPL_NO_EEPROM -#endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) -#define SPL_NO_MMC -#endif -#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI)) -#define SPL_NO_IFC -#endif - -#define CONFIG_REMAKE_ELF -#define CONFIG_GICV2 - -#include <asm/arch/stream_id_lsch2.h> -#include <asm/arch/config.h> - -/* Link Definitions */ -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#else -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#endif - -#define CONFIG_SKIP_LOWLEVEL_INIT - -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL - -#define CPU_RELEASE_ADDR secondary_boot_func - -/* Generic Timer Definitions */ -#define COUNTER_FREQUENCY 25000000 /* 25MHz */ - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) - -/* Serial Port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_serial_clock()) - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* SD boot SPL */ -#ifdef CONFIG_SD_BOOT - -#define CONFIG_SPL_MAX_SIZE 0x17000 -#define CONFIG_SPL_STACK 0x1001e000 -#define CONFIG_SPL_PAD_TO 0x1d000 - -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 -#endif /* ifdef CONFIG_SECURE_BOOT */ -#endif - -/* NAND SPL */ -#ifdef CONFIG_NAND_BOOT -#define CONFIG_SPL_PBL_PAD -#define CONFIG_SPL_MAX_SIZE 0x1a000 -#define CONFIG_SPL_STACK 0x1001d000 -#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SPL_BSS_START_ADDR 0x80100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#ifdef CONFIG_SECURE_BOOT -#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) -#endif /* ifdef CONFIG_SECURE_BOOT */ - -#ifdef CONFIG_U_BOOT_HDR_SIZE -/* - * HDR would be appended at end of image and copied to DDR along - * with U-Boot image. Here u-boot max. size is 512K. So if binary - * size increases then increase this size in case of secure boot as - * it uses raw u-boot image instead of fit image. - */ -#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) -#else -#define CONFIG_SYS_MONITOR_LEN 0x100000 -#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ - -#endif - -/* IFC */ -#ifndef SPL_NO_IFC -#if defined(CONFIG_TFABOOT) || \ - (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) -#define CONFIG_FSL_IFC -/* - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address - * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting - */ -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 - -#ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#endif -#endif -#endif - -/* I2C */ -#define CONFIG_SYS_I2C - -/* PCIe */ -#ifndef SPL_NO_PCIE -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_PCIE3 /* PCIE controller 3 */ - -#ifdef CONFIG_PCI -#define CONFIG_PCI_SCAN_SHOW -#endif -#endif - -/* Command line configuration */ - -/* MMC */ -#ifndef SPL_NO_MMC -#ifdef CONFIG_MMC -#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 -#endif -#endif - -/* DSPI */ -#ifndef SPL_NO_DSPI -#define CONFIG_FSL_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_DM_SPI_FLASH -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif -#endif - -/* FMan ucode */ -#ifndef SPL_NO_FMAN -#define CONFIG_SYS_DPAA_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 - -#ifdef CONFIG_TFABOOT -#define CONFIG_SYS_FMAN_FW_ADDR 0x900000 -#define CONFIG_SYS_QE_FW_ADDR 0x940000 - - -#else -#ifdef CONFIG_NAND_BOOT -/* Store Fman ucode at offeset 0x900000(72 blocks). */ -#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SD_BOOT) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 1MB (2040 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). - */ -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) -#define CONFIG_SYS_QE_FW_ADDR (512 * 0x4A00) -#elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 -#else -/* FMan fireware Pre-load address */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 -#define CONFIG_SYS_QE_FW_ADDR 0x60940000 -#endif -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) -#endif -#endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) - -#define CONFIG_HWCONFIG -#define HWCONFIG_BUFFER_SIZE 128 - -#ifndef SPL_NO_MISC -#ifndef CONFIG_SPL_BUILD -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(USB, usb, 0) \ - func(DHCP, dhcp, na) -#include <config_distro_bootcmd.h> -#endif - -/* Initial environment variables */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:bank_intlv=auto\0" \ - "fdt_high=0xffffffffffffffff\0" \ - "initrd_high=0xffffffffffffffff\0" \ - "fdt_addr=0x64f00000\0" \ - "kernel_addr=0x61000000\0" \ - "scriptaddr=0x80000000\0" \ - "scripthdraddr=0x80080000\0" \ - "fdtheader_addr_r=0x80100000\0" \ - "kernelheader_addr_r=0x80200000\0" \ - "kernel_addr_r=0x81000000\0" \ - "kernel_start=0x1000000\0" \ - "kernelheader_start=0x800000\0" \ - "fdt_addr_r=0x90000000\0" \ - "load_addr=0xa0000000\0" \ - "kernelheader_addr=0x60800000\0" \ - "kernel_size=0x2800000\0" \ - "kernelheader_size=0x40000\0" \ - "kernel_addr_sd=0x8000\0" \ - "kernel_size_sd=0x14000\0" \ - "kernelhdr_addr_sd=0x4000\0" \ - "kernelhdr_size_sd=0x10\0" \ - "console=ttyS0,115200\0" \ - "boot_os=y\0" \ - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ - BOOTENV \ - "boot_scripts=ls1043ardb_boot.scr\0" \ - "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \ - "scan_dev_for_boot_part=" \ - "part list ${devtype} ${devnum} devplist; " \ - "env exists devplist || setenv devplist 1; " \ - "for distro_bootpart in ${devplist}; do " \ - "if fstype ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "bootfstype; then " \ - "run scan_dev_for_boot; " \ - "fi; " \ - "done\0" \ - "boot_a_script=" \ - "load ${devtype} ${devnum}:${distro_bootpart} " \ - "${scriptaddr} ${prefix}${script}; " \ - "env exists secureboot && load ${devtype} " \ - "${devnum}:${distro_bootpart} " \ - "${scripthdraddr} ${prefix}${boot_script_hdr}; " \ - "env exists secureboot " \ - "&& esbc_validate ${scripthdraddr};" \ - "source ${scriptaddr}\0" \ - "qspi_bootcmd=echo Trying load from qspi..;" \ - "sf probe && sf read $load_addr " \ - "$kernel_addr $kernel_size; env exists secureboot " \ - "&& sf read $kernelheader_addr_r $kernelheader_addr " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ - "bootm $load_addr#$board\0" \ - "nor_bootcmd=echo Trying load from nor..;" \ - "cp.b $kernel_addr $load_addr " \ - "$kernel_size; env exists secureboot " \ - "&& cp.b $kernelheader_addr $kernelheader_addr_r " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ - "bootm $load_addr#$board\0" \ - "nand_bootcmd=echo Trying load from NAND..;" \ - "nand info; nand read $load_addr " \ - "$kernel_start $kernel_size; env exists secureboot " \ - "&& nand read $kernelheader_addr_r $kernelheader_start " \ - "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ - "bootm $load_addr#$board\0" \ - "sd_bootcmd=echo Trying load from SD ..;" \ - "mmcinfo; mmc read $load_addr " \ - "$kernel_addr_sd $kernel_size_sd && " \ - "env exists secureboot && mmc read $kernelheader_addr_r " \ - "$kernelhdr_addr_sd $kernelhdr_size_sd " \ - " && esbc_validate ${kernelheader_addr_r};" \ - "bootm $load_addr#$board\0" - - -#undef CONFIG_BOOTCOMMAND -#ifdef CONFIG_TFABOOT -#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif -#endif -#endif - -/* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 64 /* max command args */ - -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#include <asm/arch/soc.h> - -#endif /* __LS1043A_COMMON_H */ |