summaryrefslogtreecommitdiff
path: root/include/configs/ls1046a_common.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/ls1046a_common.h')
-rw-r--r--include/configs/ls1046a_common.h290
1 files changed, 0 insertions, 290 deletions
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
deleted file mode 100644
index 59c43f1..0000000
--- a/include/configs/ls1046a_common.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2016 Freescale Semiconductor
- * Copyright 2019 NXP
- */
-
-#ifndef __LS1046A_COMMON_H
-#define __LS1046A_COMMON_H
-
-/* SPL build */
-#ifdef CONFIG_SPL_BUILD
-#define SPL_NO_QBMAN
-#define SPL_NO_FMAN
-#define SPL_NO_ENV
-#define SPL_NO_MISC
-#define SPL_NO_QSPI
-#define SPL_NO_USB
-#define SPL_NO_SATA
-#endif
-#if defined(CONFIG_SPL_BUILD) && \
- (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
-#define SPL_NO_MMC
-#endif
-#if defined(CONFIG_SPL_BUILD) && \
- !defined(CONFIG_SPL_FSL_LS_PPA)
-#define SPL_NO_IFC
-#endif
-
-#define CONFIG_REMAKE_ELF
-#define CONFIG_GICV2
-
-#include <asm/arch/config.h>
-#include <asm/arch/stream_id_lsch2.h>
-
-/* Link Definitions */
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
-#endif
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
-
-#define CPU_RELEASE_ADDR secondary_boot_func
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 25000000 /* 25MHz */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
-
-/* Serial Port */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* SD boot SPL */
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
-#define CONFIG_SPL_STACK 0x10020000
-#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */
-#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image. Here u-boot max. size is 512K. So if binary
- * size increases then increase this size in case of secure boot as
- * it uses raw u-boot image instead of fit image.
- */
-#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_MONITOR_LEN 0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
-#endif
-
-#if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
-#define CONFIG_SPL_TARGET "spl/u-boot-spl.pbl"
-#define CONFIG_SPL_MAX_SIZE 0x1f000
-#define CONFIG_SPL_STACK 0x10020000
-#define CONFIG_SPL_PAD_TO 0x20000
-#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SYS_MONITOR_LEN 0x100000
-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-#endif
-
-/* NAND SPL */
-#ifdef CONFIG_NAND_BOOT
-#define CONFIG_SPL_PBL_PAD
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */
-#define CONFIG_SPL_STACK 0x1001f000
-#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
- CONFIG_SPL_BSS_MAX_SIZE)
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
-#define CONFIG_SYS_MONITOR_LEN 0xa0000
-#endif
-
-/* I2C */
-#define CONFIG_SYS_I2C
-
-/* PCIe */
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define CONFIG_PCIE2 /* PCIE controller 2 */
-#define CONFIG_PCIE3 /* PCIE controller 3 */
-
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-/* SATA */
-#ifndef SPL_NO_SATA
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
- CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
-/* Command line configuration */
-
-/* MMC */
-#ifndef SPL_NO_MMC
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-#endif
-
-/* FMan ucode */
-#ifndef SPL_NO_FMAN
-#define CONFIG_SYS_DPAA_FMAN
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
-#endif
-
-#ifdef CONFIG_TFABOOT
-#define CONFIG_SYS_FMAN_FW_ADDR 0x900000
-#else
-#ifdef CONFIG_SD_BOOT
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
- */
-#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
-#elif defined(CONFIG_NAND_BOOT)
-#define CONFIG_SYS_FMAN_FW_ADDR (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
-#endif
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
-#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
-
-#define CONFIG_HWCONFIG
-#define HWCONFIG_BUFFER_SIZE 128
-
-#ifndef CONFIG_SPL_BUILD
-#define BOOT_TARGET_DEVICES(func) \
- func(SCSI, scsi, 0) \
- func(MMC, mmc, 0) \
- func(USB, usb, 0) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-#endif
-
-#if defined(CONFIG_TARGET_LS1046AFRWY)
-#define LS1046A_BOOT_SRC_AND_HDR\
- "boot_scripts=ls1046afrwy_boot.scr\0" \
- "boot_script_hdr=hdr_ls1046afrwy_bs.out\0"
-#else
-#define LS1046A_BOOT_SRC_AND_HDR\
- "boot_scripts=ls1046ardb_boot.scr\0" \
- "boot_script_hdr=hdr_ls1046ardb_bs.out\0"
-#endif
-#ifndef SPL_NO_MISC
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=auto\0" \
- "ramdisk_addr=0x800000\0" \
- "ramdisk_size=0x2000000\0" \
- "fdt_high=0xffffffffffffffff\0" \
- "initrd_high=0xffffffffffffffff\0" \
- "fdt_addr=0x64f00000\0" \
- "kernel_addr=0x65000000\0" \
- "scriptaddr=0x80000000\0" \
- "scripthdraddr=0x80080000\0" \
- "fdtheader_addr_r=0x80100000\0" \
- "kernelheader_addr_r=0x80200000\0" \
- "load_addr=0xa0000000\0" \
- "kernel_addr_r=0x81000000\0" \
- "fdt_addr_r=0x90000000\0" \
- "ramdisk_addr_r=0xa0000000\0" \
- "kernel_start=0x1000000\0" \
- "kernelheader_start=0x800000\0" \
- "kernel_load=0xa0000000\0" \
- "kernel_size=0x2800000\0" \
- "kernelheader_size=0x40000\0" \
- "kernel_addr_sd=0x8000\0" \
- "kernel_size_sd=0x14000\0" \
- "kernelhdr_addr_sd=0x4000\0" \
- "kernelhdr_size_sd=0x10\0" \
- "console=ttyS0,115200\0" \
- CONFIG_MTDPARTS_DEFAULT "\0" \
- BOOTENV \
- LS1046A_BOOT_SRC_AND_HDR \
- "scan_dev_for_boot_part=" \
- "part list ${devtype} ${devnum} devplist; " \
- "env exists devplist || setenv devplist 1; " \
- "for distro_bootpart in ${devplist}; do " \
- "if fstype ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "bootfstype; then " \
- "run scan_dev_for_boot; " \
- "fi; " \
- "done\0" \
- "boot_a_script=" \
- "load ${devtype} ${devnum}:${distro_bootpart} " \
- "${scriptaddr} ${prefix}${script}; " \
- "env exists secureboot && load ${devtype} " \
- "${devnum}:${distro_bootpart} " \
- "${scripthdraddr} ${prefix}${boot_script_hdr}; " \
- "env exists secureboot " \
- "&& esbc_validate ${scripthdraddr};" \
- "source ${scriptaddr}\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
- "sf probe && sf read $load_addr " \
- "$kernel_start $kernel_size; env exists secureboot " \
- "&& sf read $kernelheader_addr_r $kernelheader_start " \
- "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
- "bootm $load_addr#$board\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
- "mmcinfo; mmc read $load_addr " \
- "$kernel_addr_sd $kernel_size_sd && " \
- "env exists secureboot && mmc read $kernelheader_addr_r " \
- "$kernelhdr_addr_sd $kernelhdr_size_sd " \
- " && esbc_validate ${kernelheader_addr_r};" \
- "bootm $load_addr#$board\0"
-
-#endif
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_MAXARGS 64 /* max command args */
-
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#include <asm/arch/soc.h>
-
-#endif /* __LS1046A_COMMON_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 05:05:26 +0000